LITHIUM POLYMER BATTERY Battery LIPO 3350mAh 3.7V

The Sonoff MINI R4 Extreme Smart Switch (the smallest WiFi switch) is a universal WiFi controlled switch built with the ESP32 chip. It works with a voltage of 230V and allows you to control any device from anywhere in the world, controlling it via your mobile phone or voice assistants such as Alexa or Google Home. Thanks to its small size - it's 40 per cent smaller than the Sonoff miniR2 - it fits most power supplies, including the smallest European standards.

Elegant WIFI controlled touch wall light switch with 2 switches. SONOFF TX offers you perfect intelligence control solutions for your home or workplace. Compatible with Amazon Alexa, Google Assistant DIY Smart Home, Nest via iPhone or Android.

Protective silicone case Kittenbot used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun.

The Konnwei KW510 is an advanced multi-function device that uses state-of-the-art technology to allow you to easily, quickly and accurately measure the actual cold start capability, battery condition and common faults in the vehicle's starting and charging systems. The KW510 is particularly useful for workshops as it can accurately detect the problem, allowing the vehicle to be repaired quickly.

Konnwei's KW870 car battery tester is capable of effectively analysing and reading important car data such as voltage, internal resistance, cold start current and AH capacity. In addition, the device calculates cold-start capacity and the degree of ageing, allowing for faster and more accurate repairs. Whether you're a beginner or an expert, this car battery diagnostic device can be used with a wide range of 6-18 V batteries with a capacity of 100-2000 CCA, including traditional, flat AGM, spiral AGM and gel batteries.

DC to DC Step-up converter 1.5-4.2V to 5V. Operates with a maximum output current of 500mA.

Protective silicone case Kittenbot used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun.

Creality UW-02 machine designed for the final processing of 3D prints made with resin. It allows large 3D models with a maximum size of 240 x 160 x 200 mm to be washed and dried. The UW-02 cures prints using UV light with wavelengths of 385 nm and 405 nm, using a turntable. The washing machine is characterised by its ease of use.

Creality's Halot-Mage resin 3D printer has a 10.3-inch LCD screen, giving it an extremely large working area of 228 x 128 x 230 mm. The Halot-Mage has a high resolution of 8K, resulting in prints of the highest precision.

The practical cable stripper from the Rebel Tools range is ideal for stripping the insulation from single or multi-conductor cables. The hardened jaws and blades allow for greater cutting precision and the serrated tip makes it easier to remove the insulation and minimises the risk of damaging the cable.

Nicla Sense ME is the smallest Arduino-developed board equipped with a range of the latest Bosch environmental and motion sensors. The module is based on the nRF52832 ARM Cortex M4 chip clocked at 64 MHz with 512 kB of Flash, 64 kB of RAM and 2 MB of SPI Flash and 2 MB of QSPI embedded memory. The Nicla Sense ME features the Bosch BHI260AP, BMP390, BMM150 and BME688 embedded sensors. 

Nicla Voice combines a powerful Syntiant® NDP120 Neural Decision Processor™ (NDP), a high-performance IM69D130 microphone, a BMI270 6-axis intelligent motion sensor, a BMM150 3-axis magnetometer and Bluetooth® Low Energy connectivity.

Nicla Vision combines a powerful STM32H747AII6 Dual ARM® Cortex® M7/M4 IC processor with a TinyML-enabled 2 MP colour camera, as well as a smart 6-axis motion sensor, integrated microphone and distance sensor. Supports MicroPython, and offers WiFi and Bluetooth® Low Energy connectivity.

Arduino Uno R4 WiFi is the original Arduino Uno module with the powerful 32-bit Renesas RA4M1 ARM Cortex M4 ARM Cortex M4 microcontroller. The board is equipped with 256 kB of Flash memory and 32 kB of SRAM, 14 digital I/O, including 6 PWM, 6 ADC and 1 DAC. Popular communication interfaces such as SPI, I2C, UART and CAN are available. It operates with a voltage of 5 V. The ESP32-S3-Mini chip handles WiFi and Bluetooth communication. The Uno R4 WiFi features a 12x8 matrix of addressable red LEDs as well as a Qwiic connector.

It is an 8-megapixel camera with a 160-degree field of view, equipped with a chip Sony IMX219.  The camera is designed for NVIDIA Jetson Nano and NVIDIA Jetson Xavier NX development kits.

Converter RS232/485/422 to Ethernet RJ45 has been designed for the industrial environment. It combines multiple functions including serial server, Modbus gateway, MQTT gateway, RS485 to JSON, etc. The module has an RS232/485/422 and Ethernet port (PoE function).Suitable for applications such as data acquisition, IoT gateway, IoT security. and smart device monitoring.

M12 Long Focal Length Lens, 5MP, Long Focal Length 25mm, F1.7 Large Aperture, Compatible with Raspberry Pi High Quality Camera M12

 M12 High Resolution Lens, 12MP, 69.5° FOV, 8mm Focal length, Compatible with Raspberry Pi High Quality Camera M12. Long Focal Length.

M12 M12 High Resolution Lens, 12MP, 113° FOV, 2.7mm Focal length, Compatible with Raspberry Pi High Quality Camera M12. No distortion.