1.8 inch SPI TFT LCD screen for Micro:Bit
  • 1.8 inch SPI TFT LCD screen for Micro:Bit
  • 1.8 inch SPI TFT LCD screen for Micro:Bit
  • 1.8 inch SPI TFT LCD screen for Micro:Bit
  • 1.8 inch SPI TFT LCD screen for Micro:Bit

1.8 inch SPI TFT LCD screen for Micro:Bit

RA060

A perfect LCD display for your Micro:Bit - review detailed information. This is a colour display module designed for the BBC micro:bit, 1.8 inches diagonal, 160x128 pixels, capable of displaying 65K colours.

Waveshare
14718
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

A perfect LCD display for your Micro:Bit - review detailed information. This is a colourful display module designed for the BBC micro:bit, 1.8 inch diagonal, 160x128 pixels, capable of displaying 65K colours.

Tired of the 5x5 LED matrix? Time to get a small display for your micro:bit, this would be the ideal choice.

Display module features:

  • Edge connector for micro:bit  
  • ILI9106 embedded driver
  • ST7735S driver
  • 1.8 inch LCD
  • Resolution: 160x128
  • Supports 65,000 colours
  • SPI interface
  • Backlight adjustment via PWM
  • Solder pads reserved for the control interface, facilitates connection to Arduino / Nucleo boards

Technical features:

  • Driver: ST7735S
  • Resolution: 160x128
  • Display colour: RGB, 65K colours
  • Operating voltage: 3.3V
  • Dimension: 61mm x 51.5mm

Customers who bought this product also bought

HC-SR04 Ultrasonic Sensor Distance Measuring Module

It is very easy to make it work with an Arduino, PIC or any other microcontroller.
In its output pin we will be able to measure the PWM pulse width depending on the distance of the obstacle.
HC-SR04 Ultrasonic Sensor Distance Measuring Module features:
- Supply voltage: 5V (4.5V- 6V)
- Consumption: 30 mA typical, (35 mA max)
- Interface: VCC , GND, Signal
- Range: 2 cm to 3 meters
- Angle 15º
- LED indicator of measurement in progress
- Frequency: 40 kHz for 200 µs - Size: 30mm x 20mm
- Quantity: 1 unit
Useful links for Arduino / Raspberry programming and projects with boards Arduino / Raspberry:
Automatic robot operation with obstacle detection />

S0007

Price €1.79

Joystick Breakout Board for BBC Micro:Bit

The joystick board can be used to simulate the mouse keyboard. The 3V, G, P0 and P1 are connected to a card micro: bit to imitate the serial port.
This board consists of 6 buttons and joystick. Connect the joystick and buttons to the micro: bit pins.

RA040

Price €9.95

40x Male to male cables 10cm

40x Male to male cables 10cm features:
- Length: 10cm
- Quantity: 40 cables
- Dupont male connectors on both ends
- Compatible with 2.54mm female connectors
- High quality and good working condition
- Easy to install and use

K0107

Price €1.99

Kit Seeed Grove Arduino Starter

Seeed Grove Arduino Starter kit is a game-changer for schools and robotic classes. You get a set of 10 sensors with a Arduino compatible board and 12 classes for only 28.99 EUR!

SS004

Price €35.90

ATmega2560 R3 REV3 16U2 Mega2560 module with USB cable

It has an Atmega2560 chip running at 16Mhz with a factory loaded bootloader with 54 digital input / output pins (from which 14 can be used as PWM outputs) and 16 analog inputs, 4 UART (hardware serial ports). The board includes a USB connector, an ICSP port, a reset button and some status LEDs. Atmega16U2 programmed as a USB-to-serial converter. Simply connect it to a computer with a USB cable or power with a power adapter and DC connector.

B0003

Price €24.90
€23.95

19,79 tax excl.

Tax included 1
Last 6 items
Price €23.95

Order until 4pm we will send today
30 days return