Link list

Link list

Filter By

Filter By

Brand

Brand

Price

Price

  • €0.00 - €8.00

Chip

Chip

Tipo de conversión

Tipo de conversión

Logic Converters

Many electronic devices use a logic voltage of 3.3V. Some boards, such as the Arduino UNO, are not suitable for these voltages, so it is necessary to use a converter that will make it possible to switch from one voltage to another. There are two types of logic converters: uni-directional and bidirectional. Uni-directional converters have all inputs associated with one voltage, and outputs with the other. Bi-directional converters have both inputs and outputs at each voltage value. Bi-directional converters can also be automatic and interchange output ports with input ports depending on the signal. Check our offer to find the most appropriate converters for your project and consult our forum or technical information to find out more about how they work.

Logic Converters

Subcategories

Showing 1-10 of 27 item(s)
FT232 USB to TTL Serial...

FT232 USB to TTL Serial Converter Adapter Module 5V 3.3V + Cable

A virtual serial port to your PC through the USB port. FT232 USB to TTL Serial Converter Adapter Module 5V 3.3V + Cable features:
- USB-Serial TTL 3.3V -5V Converter
- LED indicator for Tx, Rx, power supply
- Communication: Transceiver RX / TX TTL COM Virtual RS232
- Voltage: 3.3V or 5V - via jumper
- Pins: DTR, RX, TX, VCC, CTS, GND
- Protections: Electronic fuse up to 500mA
- Size: 35 x 17 mm Pitch 2,54mm
- Connection: Mini USB. Driver: W98 / W2000 / W2003 / W2008 / WinXP / WinVista / W7 / W8 / Linux / Mac
Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards:
User manual for remote control + 4-channel receiver 315 MHz IC2262
- Wire the USB />

C0007

Available

Price €3.95
Optical Isolated Converter...

Optical Isolated Converter FT232RL USB 2.0 to RS485

This converter has an internal DC / DC supply and a total isolation between the USB and the RS485 output and allows to establish a reliable and safe communication.
Its FT232RL component has excellent compatibility and a communication rate up to 3M for a maximum distance of 1.2 km. The RS485 output interface uses an optical coupler with high speed for an optical insulation of 1500V and a protection against lightning of 600W: these characteristics allow to protect the computer from the potential damage of static electricity, lightning, over voltages and ground faults. Optical Isolated Converter FT232RL USB 2.0 to RS485 features:
- Required systems: WINDOWS CE / 2000 / XP / VISTA / WIN 7 / LINUX / MAC OS
- Internal DC />

C0015

Backorder

Price €25.49
CP2102 USB 2.0 A RS232...

CP2102 USB 2.0 A RS232 Converter UART TTL Serial

Ideal for connecting TTL RS232 devices to your PC through the USB port. CP2102 USB 2.0 A RS232 Converter UART TTL Serial features:
- Controller CP2102
- 5 pins: 3.3v, 5.0v, TxR, RxD, GND
- Standard USB type to male and 5 pin TTL connector
- 3 Status LEDs: Power, RX and TX
- USB 2.0 specification with 12Mbps maximum speed

C0001

Available

Price €3.70
USB to A RS232 UART TTL 5V...

USB to A RS232 UART TTL 5V Converter + Cables

Ideal for connecting TTL RS232 devices to your PC through the USB port. USB to A RS232 UART TTL 5V Converter + Cables features:
- Compatible controller PL2303HX
- 5 pins: 3.3v, 5.0v, TXR, RDX, GND
- Heat shrinkable insulating cover
- LED indicators of data transmission
- 2.5A self-recovery protective fuse
- Supported OS: WinME, Win2003, Win XP, Vista, Win 7, Linux
- Weight: 40 gr. (approx.)

C0009

Available

Price €2.52
RS232 USB to Serial TTL...

RS232 USB to Serial TTL Adapter Module - USB to Serial PL2303HX PL2303

Ideal to connect TTL RS232 devices to your PC through the USB port. RS232 USB to Serial TTL Adapter Module - USB to Serial PL2303HX PL2303 features:
> - Compatible PL2303 controller
- 5 pins: 3.3V, 5.0V, TxR, RxD, GND
- Heat shrinkable insulating cover
- Led data transmission indicators
- 2.5A self-recovery protector fuse
- Supported OS: Win ME, Win2003, Win XP, Vista, Win 7
- Weight: 40 gr. (approx.)

C0005

Available

Price €1.49
USB to RS485 USB to 485...

USB to RS485 USB to 485 Max485 Converter

Ideal for connecting RS485 devices to your PC through the USB port. USB to RS485 USB to 485 Max485 Converter features:
- CH340 controller
- Supported OS: Win XP, Vista, Win 7.8, OS, Linux
- Work with Modbus, Profibus
- USB 2.0 specification with 6Mbps of maximum speed
- Measures: 60x 18x 14 mm

C0003

Available

Price €2.69
Module MAX3232 Converter...

Module MAX3232 Converter RS232 to TTL Port DB9 female

This product is widely used in radio modifications, cell phone flash, xbox360 flash detection, GPS, car, Flash, HDD repair, top box upgrade.
It can be used to download MCU types. Module MAX3232 Converter RS232 to TTL Port DB9 female features:
- Input voltage: 3.3 - 5 VDC
- Multi-channel RS232 controller / receiver MAX3232
- Transmission / reception speed up to 250 kbit / s
- DB9 serial port
- Interface with four pins:
       - TX: transmission signal
       - RX: reception signal
       - VCC: Supply voltage
       - GND: connects the power cathode
- Operating temperature: -65 ° C - + 150 ° C
- UART communication
- Includes a 4-wire female / female connector for easy connection with the arduino

C0016

Available

Price €2.90
Back to top

Active filters

  • Brand: OEM

Level converters

Microcontrollers and peripherals often work on different logic levels - that is a 1 signal is indicated by a 3.3V in some circuits and by 5.0V in other. To make them "talk" to each other you need to bump up the signal or lower it down. And that is where level converters come into play. The easiest way to go about it is to get a bi-directional making it universal and easy to connect the circuit both ways - from higher to lower voltage and the other way around.

USB converters

Another "difficulty" in connecting and in general getting around with your new Arduino or any other controller might be connecting it to your PC or laptop. We are all well used to the USB ports and it is not surprising by all means. They are fast, they convenient. However, back in the day there plenty of standards used for communication and interestingly most of them are still used, even though maybe not in such popular uses. The two most used standards of transmission are RS232 and RS485 - often served by a popular 9 pin DB connector. However, for the development boards, what is the most probable is that you will be playing with straight 4 pin TTL connection. There is a range of controllers allowing for this conversion - starting with the class, quality and reliability of FT232 by FTDI through PL2303 through CH340. You name it we have it, in all price levels and from range of renowned and a bit less renowned producers!

ATmega programmers

Last but not least, you might not only need to connect your board to a laptop, but as well to program the ATmega on it. Well, you will need yet another equipment for that. ATmega programmers come in all kinds and with range of different functionalities. Revise our offering, and find an easy to use and effective microcontroller programer