Internet and Wireless modules

W5100 Mini Network Module Ethernet Shield Arduino features:
- Shield Ethernet for Arduino and compatible boards based on the Wiznet W5100 chip
- Provides a simple mode to connect your module to the local network and the internet
- Compatible with the official Arduino Ethernet library
- With this shield you can build a web server
- It can be used as a server or as a client - Controller: Wiznet W5100
- Supports TCP and UDP protocols
- Supports up to 4 simultaneous connections
- Compatible with all versions of Arduino: UNO, mega 1280/2560
- Dimensions: 50 x 25x 25mm

Antenna with Magnetic Base Male GSM GPRS 3G 800MHz 1800MHz 1900MHz 7dBI SMA features:
- Standard: GSM / GPRS / 3G
- Frequency range: 800 ~ 1900MHz
- Interface: SMA male
- Gain: 7dBi
- Length of the antenna: 20cm
- V.S.W.R .: <1.5
- Impedance (ohm): 50
- Maximum input power (W): 100W
- Operating temperature: -40ºC ~ + 70ºC

Low Loss Coax Cable H-155 2.4GHz WiFi LTE GSM features:
- The cable is used for system transmissions
2.4 [GHz] (WiFi, LTE, 3G, GPS)
- It is also suitable for the lower frequencies (CB, GSM, PMR)
- It has less loss than the type RG-58 cable
- Type of coaxial cable
- H155 cable series
- 50Ω wave impedance
- Stranded core structure
- Core type Cu
- Structure of the laminated Al-PET shield, tinned copper braid
- PVC external insulation material
- Gray insulation color
- Outer cable dimensions Ø5.4mm
- Operating temperature -15 ... 70 ° C
- Resistance to weather conditions
- Installation of 2.4 GHz antenna cable, outdoor
- Attenuations [dB / 100m]:
* 50 [MHz] - 6.5
* 100 [MHz] - 9.3

The network module communicates with the Arduino type board through the SPI protocol ideal for projects with ARDUINO, PIC, AVR, STM32. ENC28J60 Ethernet LAN Network Module Mini AVR LPC STM3 features:
- Chip ENC28J60 Microchip
- Module: 10Base-T
- 3.3V power
- SPI interface
- 25Mhz speed
- LED status LED
- Hanrun network transformer
- Network Interface board HR911105A
- Operating temperature: -40ºC to + 85ºC
- Dimensions: 51 x 19 x 16 mm

Universal Magnetic Antenna Connector Male Plug SMA 150cm GPS features:
- Standard: GPS 1575.42 MHz
- Voltage: 3 ~ 5V
- Current: max 10mA
- Interface: SMA male
- Polarization: circular (right)
- LNA gain (without cable): 28dB typ
- Noise figure: 1.5dB typ
- Operating temperature: -40'C ~ + 85'C
- Cable length 150cm
- Dimensions: 49 x38 x16 mm

Shield Ethernet for Arduino boards and compatible based on the Wiznet W5100 chip.
Provides an easy way to connect your module to the local network now internet.
Compatible with the official Arduino Ethernet library.
With this shield you can build a web server.
It can be used as a server or as a client.
It has support for a microSD that can be used to store files for distribution on the network. Ethernet Shield W5100 Web Server features:
- Controller: Wiznet W5100
- Supports protocols TCP and UDP
- Supports up to 4 simultaneous connections
- Compatible with all Arduino versions: UNO, mega 1280/2560
- Dimensions: 74 x 54 x 25mm

Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino features:
- Can be connected with the ESP8266 module with ipex
- Standard: 2.4GHz
- Frequency range: 2400 ~ 2500MHz
- Interface: SMA
- Gain: 3dBi
- Length of the antenna: 10cm
- V.S.W.R.: <1.5
- Polarization: Vertical
- No Circularity (dB): +/- 0.5
- Impedance (ohm): 50
- Maximum input power (W): 50W
- Operating temperature: -40'C ~ + 70'C

The network module communicates with the Arduino type board through the SPI protocol ideal for projects with ARDUINO, PIC, AVR, STM32. ENC28J60 Ethernet LAN Network Module for Arduino AVR LPC STM3 features:
- Chip ENC28J60 Microchip
- Module: 10Base-T
- 3.3V power
- SPI interface
- 25Mhz speed
- LED status LED
- Hanrun network transformer
- Network Interface board HR911105A
- Operating temperature: -40ºC to + 85ºC
- Dimensions: 55x 35x 16 mm

Can be connected with the ESP8266 module with IPEX
Compatible with Hirose U.FL and IPEX MHF1 Adapter SMA Female GPS GSM IPEX 2.4 Ghz RF ESP8266 1.13mm 50 Ohm features:
- Frequency range: 0 ~ 6000MHz
- Interface: SMA female connector
- IPEX female connector
- Cable length: 15cm
- Coaxial cable: 1,13mm
- V.S.W.R.: <1.5
- Impedance (ohm): 50
- Maximum input power (W): 50W
- Operating temperature: -40ºC ~ + 70ºC

The Ethernet module for Arduino and compatible boards based on the Wiznet W5500 chip, faster than the previous W5100. It provides an easy way to connect your module to the local network and internet based WIZNET with a TCP/IP interface. Compatible with libraries with the same Ethernet API. A web server can be built with this module. It can be used as a server or as a client.

Can be connected with the ESP8266 module with Ipex
Compatible with Hirose U.FL and IPEX MHF1 Male Pigtail Adapter IPEX SMA 2.4GHz 1.13mm 50 Ohm GPS GSM WiFi RF features:
- Frequency range: 0 ~ 6000MHz
- Interface: SMA male connector
- IPEX female connector
- Cable length: 15cm
- Coaxial cable: 1.13mm
- V.S.W.R.: <1.5
- Impedance (ohm): 50
- Maximum input power (W): 50W
- Operating temperature: -40'C ~ + 70'C

The Ethernet module for Arduino and compatible boards based on the Wiznet W5500 chip, faster than the previous W5100. It provides an easy way to connect your module to the local network and internet based WIZNET with a TCP/IP interface. Compatible with libraries with the same Ethernet API. A web server can be built with this UNO board shield. It can be used as a server or as a client.

Antenna 2.4GHz WiFi Bluetooth 4dBi IPEX ESP8266 Zigbee features:
- Works with ESP8266 Zigbee Arduino
- Can be connected with the ESP8266 module with ipex
- Standard: 2.4GHz
- Frequency range: 2100 ~ 2600MHz
- Interface: IPEX
- Gain: 4dBi +/- 0.7dBi
- Length of the antenna: 10cm
- V.S.W.R.: <2
- Polarization: Vertical
- No Circularity (dB): +/- 0.5
- Impedance (ohm): 50
- Operating temperature: -40'C ~ + 65'C

The WIZ850io is a compact sized network module (Ethernet module) for Arduino and compatible boards based on the Wiznet W5500 chip, faster than the previous W5100. It provides an easy way to connect your module to the WIZNET Ethernet-based local network and internet with a TCP/IP interface. Compatible with libraries with the same Ethernet API. With this module with RJ-45 port you can build a web server. It can be used as a server or as a client.

Antenna GSM GPRS 3G IPEX features:
- PCB Antenna 2dBi Ipex U.fl 50 Ohm
- Standard: 2G 3G IPEX Antenna
- Frequency range: 700-960 MHz and ‰¤ 5; 1710-1800 MHz; 1800-1990 MHz
- Interface: IPEX
- Gain: 2dBi +/- 0.7dBi
- Length of the antenna: 10cm
- V.S.W.R.: <3.0 @ 780 ~ 960 MHz &
  <= 3.5 @ 1710 ~ 2170 MHz
- Polarization: Vertical
- No Circularity (dB): +/- 0.5
- Impedance (ohm): 50
- Operating temperature: -40'C ~ + 65'C

A waterproof pentaband antenna X000016  for all your wireless projects with Arduino and development boards

The 19.5cm antenna can be connected to the ESP8266 module with ipex. It works on LoRa 433/868/915 MHz frequencies with SMA interface.