Connectors

It is not possible to reverse the polarity by mistake.
JST PHR-2 Connector Male 2 PIN 2mm features:
Manufacturer JST Connector series: PH Connector: female connector Connector class: male Connector type: conduit-board Contactor raster: 2mm Number of pins: 2 Electrical mounting: THT Voltage Working: 100V Working current: 2A Working temperature: -25 ... 85 ° C Spatial orientation: vertical technical data sheet PH series

2x Electronic Clips Crocodile 2x50mm Black + Red features:
- Length: 50mm
- Quantity: 2 units

It is not possible to reverse the polarity by mistake.
JST PHR-2 Female 2 PIN 2mm features:
Manufacturer JST Connector series: PH Connector: plug Connector class: female Type of connector: conduit-board Raster of contactors: 2mm Number of pins: 2 Mechanical mounting: for conduit Voltage Working: 100V Working current: 2A Working temperature: -25 ... 85 ° C Connection version: contactless technical data sheet PH series

2x Banana Connector Diameter 4mm Red and Black features:
- Length: 40 mm
- Diameter plug: 4mm
- Quantity: 2 units

Polarity cannot be reversed by mistake.
90 degree angle connector. JST PHR-2 Connector Male Angle 2 PIN 2mm features:
Manufacturer JST Connector series: PH Connector: female connector Connector class: male Connector type: conduit-plate Contactor raster: 2mm Number of pins: 2 Electrical mounting: THT Working voltage: 100V Working current: 2A Working temperature: -25 ... 85 ° C Spatial orientation: horizontal data sheet PH series

Jack connectors 2.1mm inside and 5.5mm outside to power devices such as LED strips, CCTV (Cameras), Arduino. Female DC Power Connector Jack 2.1x5.5mm features:
- Ideal for connecting without welding
- It has two screws in the tip for positive and negative cable screwdriver

It is not possible to reverse the polarity by mistake.
JST PHR-3 Male 3 PIN 2mm connector features:
Manufacturer JST Connector series: PH Connector: female connector Connector class: male Connector type: conduit-board Contactor raster: 2mm Number of pins: 3 Electrical mounting: THT Voltage Working: 100V Working current: 2A Working temperature: -25 ... 85 ° C Spatial orientation: vertical technical data sheet PH series

Alligator clip connectors Red and  Black.

It is not possible to reverse the polarity by mistake.
JST PHR-2 Connector 3 PIN Female 2mm features:
Manufacturer JST Connector series: PH Connector: plug Connector class: female Type of connector: conduit-board Raster of contactors: 2mm Number of pins: 3 Mechanical mounting: for conduit Voltage Working: 100V Working current: 2A Working temperature: -25 ... 85 ° C Connection version: contactless technical data sheet PH series

Polarity cannot be reversed by mistake.
90 degree angle connector. JST PHR-2 Connector Male Angle 3 PIN 2mm features:
Manufacturer JST Connector series: PH Connector: female connector Connector class: male Connector type: conduit-plate Contactor raster: 2mm Number of pins: 3 Electrical mounting: THT Working voltage: 100V Working current: 2A Working temperature: -25 ... 85 ° C Spatial orientation: horizontal data sheet PH series

Banana Connector Plug 4mm Male Red features:
- Test Plug Arduino Robot PCB

Terminal for JST PHR Female Connector 2mm features:
Manufacturer JST Connector series: PH Connector: contact Type of connector: female Type of connector: conduit-plate Mechanical assembly: crimped Working voltage: 100V Working current: 2A Material: phosphor bronze Cable size: 30AWG..24AWG Compatible with: JST PHR-2 Female 2 PIN 2mm Connector JST PHR-2 Female 3 PIN 2mm Connector PH series data sheet

Crocodile Clip 30A 2x75mm Black + Red features:
- Length: 75mm
- Handle length: 38mm
- Isolated
- Quantity: 2 units

Manufacturer JST Connector Series : PH Connector : contact Connector Class : female Connector Type : conduit

10x Ring Terminals Isolation features:
- M3.5 Cable connector 0.5-1.5 mm2
- Max current 19A
- Isolated
- Quantity: 10 units

Terminals Fork Isolation features:
- M3.5 Cable connector 0.5-1.5 mm2
- Max current 19A
- Isolated
- Quantity: 10 units

Jack connectors 2.1mm inside and 5.5mm outside to power devices such as LED strips, CCTV (Cameras), Arduino. Connector Jack 2.1x5.5mm Power Supply DC Male features:
- Ideal for connecting without welding
- It has two screws in the tip for positive and negative cable screwdriver

Inlet Module Plug Fuse Switch 220V C14 3D Printer features:
- Voltage and current of 10A, 250V AC
- Plug type - 3 pins IEC320 C14
- Color of the red switch
- Diameter holes 40 mm
- Distance between holes 39mm
- Size 47 x 27 mm
- Total size of 58 x 50 x 34 mm

3x DC PCB Socket Connector 5.5 x 2.1 features:
- Type: DC female jack
- Diameter of the pin: 2,1mm
- Diameter of the connector: 5.5mm
- Quantity: 3 units

Insulated connectors set 175 pcs. 18 types
Set of insulated connectors 175 units 18 types features:
Dimensions of the plastic box:
- Width: 280 mm
- Depth: 185 mm
- Height: 42 mm
Technical data of the connectors:
- Material: tinned steel
- Insulation: PVC

MR30PW-M Socket DC supply 3 pins, current rating: 15A, rated voltage: 500V 

MR30PW-FB Socket DC supply female 3 pins, current rating: 15A, rated voltage: 500V 

Uninsulated female flat faston power supply terminal 6.3 / 0.8 mm

This Shield provides a 3.5mm connector where you can connect a three-electrode sensor cable, allowing you to test and use the MyoWare muscle sensor without actually connecting it to your person.

Simple breadboard for your MyoWare Muscle Sensor. You can use the provided area of the shield to solder in any custom circuit you can think of. This shield provides 8 x 15 solderable through holes on a standard 0.1" grid.

MyoWare Power Shield is designed to use two standard CR2032 coin cell batteries to power the MyoWare muscle sensor. These will be connected in parallel for extended capacity at a nominal 3.0V.

Male jack connectors (2.1mm internal and 5.5mm external)  for powering devices such as 12V/ 24V LED strips, CCTV (Cameras), Arduino.  Easy to install, quick connector without screw - Quick Wire Connector.

Female jack connectors (2.1mm internal and 5.5mm external)  for powering devices such as 12V/ 24V LED strips, CCTV (Cameras), Arduino.  Easy to install, quick connector without screw - Quick Wire Connector.

This Cable Shield provides a 3.5mm connector where you can connect a three-electrode sensor cable, allowing you to test and use the MyoWare 2.0 muscle sensor without actually connecting it to your person.