Small Thrust Actuator, Solenoid - 12VDC 10mm stroke This electromagnetic push actuator allows a force of 0.8N to be exerted and has a pitch length of 10mm. It is powered by 12VDC and has a consumption of 420mA. This supply is used in industrial automation systems. Characteristic: - Input voltage: 12VDC - Thrust length: 10mm - Holding force: 0.8N - Operating temperature: -5 ° C to 40 ° C without condensation - Humidity of operating environment: 45% to 85% non-condensing - Push bar diameter: 0.8 cm / 0.3 " - Material type: Metal - Model: ZYE1-0837Z - Actuator size: 3.7x2x2.5 cm / 1.5x0.8x1 " Code F0003 Available Price €7.95
Micro Motor 3V 5V 6V DC DIY for Arduino UNO Mega Robotics For Arduino, Smart Car, Robotics.Small electric motor magnet for direct current (DC). Micro Motor 3V 5V 6V DC DIY Arduino UNO Mega Robotics features: - Operating voltage: 1.5V to 6V- DC current: 350mA- Torque max.: 15g / cm- Max speed: 12000rpm- Weight: 16.5 g Code R0037 Available Price €0.98
Controller TB6612FNG DC PAP motor TB6612FNG controller, double H-bridge controller driver. Allows to control up to 2 current motors continuous or bipolar stepper motor. It also allows to control a unipolar stepper motor configured as bipolar. Ideal for projects with ARDUINO. You can use it with PIC, AVR, STM32. An improved version of the L298N. H-bridges are made up of MOSFET transistors, rather than BJT transistors as in the L298N. The TB6612FNG has better efficiency and smaller dimensions than the L298N. Controller TB6612FNG DC PAP motor features: - Minimum operating voltage: 4.5 V - Maximum operating voltage: 13.5 V (15V max) - Maximum current: ± 3A per channel (1.2 A direct current per channel) - Logic voltage: 5V Code R0002 Available Price €5.99
2WD Smart Robot Car Kit DIY - The ideal kit to build a robot car- Includes battery compartment for 4 AA batteries and ignition switch. (batteries not included) 2WD Smart Robot Car Kit DIY features: - Robot platform with 2 wheels and idler- UNO CH340 board compatible with Arduino- Prototype plate 170 points- Micro servo 9g- Platform for servo- Distance sensor HC-SR04- Sensor shield for sensors- L298N motor controller Motor 2WD Smart Robot Car Kit DIY features: - Voltage: 3 to 6Vdc- Speed without load: 100 RPM to 6Vdc- No-load current: 90mA to 3Vdc - 180mA to 6Vdc- Dimensions of the wheel: diameter 65mm - width 26 mm Helpful Links: Realization of a robot manageable by Infrared Code R0042 ✗ Out-of-Stock Regular price €37.84 -€1.55 Price €36.29
Speed controller for AC motor 50-220VAC 2000W 10A Characteristic: - Voltage regulator 50-220V AC 2000W - Ideal to control the speed of AC motors - Allows adjustment the output voltage between 50V and 220V - Input voltage: 220V AC - Regulation range: 50V to 220V AC - Max current: 10A - Max power.: 2000W - Dimensions: 47 x 35 x 27mm Code A0020 Available Price €3.89
Set of flat transmission belts - width 0.5mm A set of flat drive belts with a diameter from 27mm to 80mm. The kit includes approximately 50 pieces of strips from 0.5 mm to 1 mm thick. Technical data: - width: 0.5 mm - diameter from 27 mm to 80 mm - thickness: from 0.5 to 1 mm Quantity tolerance +/- 5% Code H0174 Available Price €4.20
2WD Round Car Chassis 2x Ultrasonic Sensor Contents: - 2x Round transparent chassis plate diameter of 14cm - 2x DC 5V gear motor - 2x 6.5cm wheels (Dia .) x 2.6cm (H) - 2x Encoder discs - 2x Idlers - 2x HC-SR04 ultrasonic sensor, distance meter - 2x Holder for HC-SR04 - 1x Battery holder 2xAA (batteries not included) - Screws for assembly Motor characteristic: - Voltage: 3 at 6Vdc - Reducer: 1:48 - No load speed: 100 RPM at 6Vdc - No load current: 90mA at 3Vdc - 180mA at 6Vdc Code R0005 Available Regular price €19.95 -€3.00 Price €16.95
Speed controller for DC motor (PWM) 6V-28VDC 3A PWM 6V 12V 24V Speed controller for DC motor (PWM) 6V-28VDC 3A PWM 6V 12V 24V features: - Ideal to control the speed of DC motors - Input voltage: 6-28VDC - Max continuous output current: 3A - Max power: 100W - Dimensions: 50x17x28mm - PWM frequency: 21kHz - Adjustable duty cycle: 5% -100% - Keep in mind that the voltage applied to the motor will be the supply voltage applied to the circuit Code A0021 ✗ Out-of-Stock Price €5.89
2WD Round Robot Chassis Turtle Car 2x Wheels 3x Plates DIY for Arduino Contents: - 3x Round transparent chassis plate diameter of 14cm - 2x DC 5V gearbox motor - 2x 6.5cm wheels (Dia .) x 2.6cm (H) - 2x Encoder discs - 2x Idlers - 1x Battery holder 2xAA (batteries not included) - Screws for assembly Motor characteristic: - Voltage: 3 to 6Vdc - Reducer: 1:48 - No load speed: 100 RPM at 6Vdc - No load current: 90mA at 3Vdc - 180mA at 6Vdc Code R0007 Backorder Price €17.59
2WD Smart Robot Car Distance UNO Kit DIY - The ideal kit to build a robot car- Includes battery compartment for 6 AA batteries and ignition switch. (batteries not included) 2WD Smart Robot Car Distance UNO Kit DIY features: - Robot platform with 2 wheels and idler- UNO CH340 board compatible with Arduino- Prototype plate 170 points- Micro servo 9g- Platform for servo- Distance sensor HC-SR04- Sensor shield for sensors- L298N motor controller Motor 2WD Smart Robot Car Distance UNO Kit DIY features: - Voltage: 3 to 6Vdc- Speed without load: 100 RPM to 6Vdc- No-load current: 90mA to 3Vdc - 180mA to 6Vdc Code R0047 Backorder Regular price €30.32 -€1.84 Price €28.48