DC Circular Electromagnet 12V 20kgf 8W High quality clamping electromagnet. Its supply voltage is 12V. The lifting capacity of up to 20 kg. The temperature limit reaches 130 degrees centigrade. Retention electromagnets are most often used for electric / magnetic locking of doors, flaps, and others. Use metal plates with a thickness starting from 3mm, this will ensure maximum retention force on the locking element. It is important to remove heat from the housing. The maximum force decreases as the coil temperature increases. This electromagnet will meet the expectations of even the most demanding user. Code F0005 Available Price €16.89
Set of flat transmission belts - width 2.0mm A set of flat drive belts with a diameter from 27mm to 80mm. The kit includes approximately 50 pieces of strips from 0.5 mm to 1 mm thick. Technical data: - width: 2.0mm - diameter from 27mm to 80mm - thickness: from 0.5 to 1mm Quantity tolerance +/- 5% Code H0176 Available Price €3.90
Aluminum Robotic Arm with 6 DOF axes The 6 DOF - 6-axis black aluminium arm is widely used in the field of teaching, personal production and amateur education, it can be seen as a demonstration platform with multiple degrees of freedom, its power system consists of six servo motors. So the arm can move, sideways and sideways, up and down, left and right to grasp any object. It comes with 6 servos already in set. Code R0072 Last items in stock Regular price €86.74 -€4.52 Price €82.22
Mosfet 24V 5A IRF520 PWM controller Mosfet 24V 5A IRF520 PWM controller features: - The IRF520 controller module can control the PWM signal from the Arduino module and adjust the DC voltage of So that we can control the speed of the DC motor, the brightness of the bulb, the LEDs, the heater. - The built-in IRF520 N-MOSFET transistor - Operating voltage: 3.3V -5V ( compatible with ARDUINO Raspberry PI) - Charging voltage: 0-24V - Charging current: up to 5A (more than 1A, the system must be equipped with a heat sink point) - 60W max power (more than 10W must be equipped with a heat sink) - Terminalblock connectors - LED indicating the presence of power - Dimensions: 33x24mm Code A0022 Available Regular price €2.49 -€0.50 Price €1.99
Micro Servo 9g SG90 Tower Pro Micro Servo 9g SG90 features: - Operating voltage: 3.0-7.2V- Speed (4.8V without load): 0.12sec / 60 degrees- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)- Working temperature: -30 to +60 degrees C- Cable length: approx. 23cm- Includes photo accessories and screws- Dimensions: 22x11.5x27mm Code R0013 Available Regular price €2.69 -€0.20 Price €2.49
4WD Robot Smart Car Chassis 4x Wheels DIY Ideal for building a car with obstacle detector, light follower.Includes battery compartment for 4 AA batteries and ignition switch. (batteries not included). 4WD Robot Smart Car Chassis 4x Wheels DIY features: - Voltage: 3 to 6Vdc- Speed without load: 100 RPM to 6Vdc- No-load current: 90mA to 3Vdc - 180mA to 6Vdc- Dimensions of the wheel: diameter 65mm - width 26 mm Code R0004 Available Regular price €15.89 -€3.00 Price €12.89
DC Circular Electromagnet 12V 2kgf 3W High quality clamping electromagnet. Its supply voltage is 12V. The lifting capacity of up to 2 kg. The temperature limit reaches 130 degrees centigrade. Retention electromagnets are most often used for electric / magnetic locking of doors, flaps, and others. Use metal plates with a thickness starting from 3mm, this will ensure maximum retention force on the locking element. It is important to remove heat from the housing. The maximum force decreases as the coil temperature increases. This electromagnet will meet the expectations of even the most demanding user. Code F0006 Available Price €8.49
Speed controller for DC motor (PWM) 10V-30VDC 120W 5A 10A Ideal to control the speed of DC motors. Characteristic: - Input voltage: 10-30VDC, - Max continuous output current: 5A (peak current 10A), - Max power: 120W, - Dimensions: 61x27.9x45.7mm, - PWM frequency: 16kHz, - Adjustable duty cycle: 5% -100%, - Integrates a regulator L7805CV TO- 220, - Incorporates a 10A fuse to protect the power circuit. Please note that the voltage applied to the motor will be the supply voltage applied to the circuit. Code A0088 ✗ Out-of-Stock Price €8.49
Electric Door Lock 12V DC Electromagnetic Solenoid Easy to install for the electric door lock or other automatic door lock systems with the mounting board. Code M0218 Last items in stock Regular price €9.95 -€1.00 Price €8.95
Set of flat transmission belts - width 3.0mm A set of flat drive belts with a diameter from 27mm to 80mm. The kit includes approximately 50 pieces of strips from 0.5 mm to 1 mm thick. Technical data: - width: 3.0mm - diameter from 27mm to 80mm - thickness: from 0.5 to 1mm Quantity tolerance +/- 5% Code H0177 Available Price €3.90