1 Channel Relay Module DC 5V 10A Low/High Trigger for Arduino 1 Channel Relay Module DC 5V 10A Low/High Trigger for Arduino features:- Channel: 1 (protected with Optocoupler)- Supply voltage: 5V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- Trigger signal type jumper (low / high)- LED indicator- Dimensions: 30x 54mm- Has a jumper that allows to choose type of trigger signal (low / high)- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL) Code RL001 Last items in stock Price €2.39
8 Channel High Trip 5V 10A Relay Module This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, from the TTL 8 Channel High Trip 5V 10A Relay Module features: - Channels: 8 (independent protected with Optocouplers) - Supply Voltage Vcc: 5Vdc - Output Current: 10A - High trip min 3.3V input IN1. ..IN8 - Relay activation current: 5 ~ 10mA - Isolation: Yes - Indicator LED: For each channel - Dimensions: 55x 139mm - Weight: 120g COM GND jumper input: connects GND optocouplers and GND of the circuit Code RL015 Available Price €9.95
Relay SRD-05 DC-2P 5V 10A SPDT - SRD-05VDC-SL-C Relay SRD-05 DC-2P 5V 10A SPDT features:- Supply voltage: 5V- Output Current: 10A- For power switching with 5V DC signals - Microcontroller, Arduino, Electronica Code RL011 Available Price €0.69
4-Channel 5V 10A Relay Module Characteristic: - Channels: 4 (independent protected by Optocouplers) - Supply Voltage: 5V - Output Current: 10A - Relay activation current: 15mA ~ 20mA - Isolation: Yes - Indicator LED: For each channel - Dimensions: 54x 72mm - 5V Optocoupled 4-Channel Relay Module - This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL) Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards: User manual for the remote control + 4-channel 315 MHz IC2262 receiver: - Relay Module Programming 5V 10A 4 Channel with remote control + 4 channel receiver Code RL007 Available Price €3.99
Relay Module 1 Channel 5V 10A 1 Channel 5V Relay Module. This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL). Relay Module 1 Channel 5V 10A features: - Channel: 1 - Supply Voltage: 5V - Output Current: 10A - Relay activation current: 15mA ~ 20mA - LED indicator - Dimensions: 30x 54mm Code RL005 Available Price €1.29
Relay Module DC 5V 10A 2 Channel Low/High Trigger Relay Module DC 5V 10A 2 Channel Low/High Trigger features:- Channels: 2 (independent protected with Optocouplers)- Supply voltage: 5V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- Trigger signal type jumper (low / high)- LED indicator: For each channel- Dimensions: 40x 50mm- It has a jumper that allows to choose type of trigger signal (low / high)- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL) Code RL002 Available Price €3.15
8 Channel 5V 10A Relay Module Arduino compatible 5V Relay Module with 8 opto-coupled channels. This module can be directly controlled by the microcontroller ( Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL). 8 Channel Arduino 5V 10A Relay Module features: - Channels: 8 (independent protected with Optocouplers) - Supply Voltage: 5V - Output Current: 10A - Relay activation current: 15mA ~ 20mA - Isolation: Yes - LED indicator: For each channel - Dimensions: 54x 135mm Code RL008 Available Price €9.49
Module Relay 5V Light sensor LDR photoresistor This module is a three way switch ( COM, NO and NC ) that uses the intensity of the ambient light to control directly the load at the output. Its adjustment potentiometer allows changing the sensitivity and setting the start threshold of the relay. The relay is energized when it is darker than the threshold. Code RL016 Available Price €2.39
Relay SPDT JQC-3FF 5VDC-1ZS Relay 5VDC SPDT 5VDC JQC-3FF for industrial applications, automation and process control and consumer electronics. Relay SPDT JQC-3FF 5VDC-1ZS features: - Coil voltage: 5 VDC,- Coil power: 360 mW,- Switching capability: - 10A @ 277 VAC - 12A @ 125 VAC- Operating time: between 5ms and 10ms,- Plastic sealed and flux proofed types available,- Environmental friendly product (RoHS compliant),- Working temperature: -40ºC to 70ºC,- Outline dimensions: 19.0 x 15.2 x 15.5 mm. Code RL020 Available Price €0.98
Arduino Mega 2560 Rev3 Arduino Mega 2560 R3 A000067 has been designed with larger and more ambitious projects in mind. It has 54 digital input / output pins (15 of which can be used as PWM outputs), 16 analog inputs, 4 UART (i.e. hardware serial ports). The large number of analog and digital pins, along with larger MEMORY, make the Mega 2560 ideal for devices such as 3D printers and other demanding applications. The Mega 2560 board is compatible with most shields designed for Arduino Uno. Code BAR67 Available Regular price €49.99 -€5.00 Price €44.99
Arduino Uno Rev3 SMD Arduino Uno R3 SMD is a variation of the Uno with SMD. It has 14 digital input / output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power connector, an ICSP header and a reset button. In addition, Uno SMD offers the following additional features: - ATmega16U2 instead of 8U2 as a USB to serial converter - 1.0 Code A000073 Backorder Price €24.99
Arduino Leonardo The Arduino Leonardo is one of the most popular versions of the series, behind only the legendary Uno plate to which it has very similar features (see our comparison below). The board contains a microcontroller ATmega32u4 with the participation of 20 digital inputs/outputs, of which 7 can be used as PWM outputs and 6 analog inputs. The system works with the clock signal with the frequency of 16 MHz, has 32K Flash and 2.5 KB of SRAM RAM. Code BAR57 ✗ Out-of-Stock Price €22.13
Arduino Micro Arduino Micro is based on the same architecture as Arduino Leonardo, but with a smaller form factor, which allows for easy placement on the test plates. That is, it has almost the same functionality but with a much smaller size. And that of size. As we all know, in electronics has meant a lot during the last decades (see example of computers). Developed together with Adafruit, the Leonardo has 20 digital input / output pins of which 7 can be used as PWM outputs and 6 analogue inputs, a 16 MHz crystal oscillator, a micro USB connection, an ICSP header and a reset button. The important thing is also that it comes already equipped with the USB despite its small size because we don't need to install an additional converter. Code BAR53 Backorder Price €23.34