LED Power Diode COB 5W 3000K White SMD
  • LED Power Diode COB 5W 3000K White SMD
  • LED Power Diode COB 5W 3000K White SMD
  • LED Power Diode COB 5W 3000K White SMD
  • LED Power Diode COB 5W 3000K White SMD

LED Power Diode COB 5W 3000K White SMD

P0142

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer.
Place a little thermal silicone in each of the diode placement centers.

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

LED Power Diode COB 5W 3000K White SMD description


COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer.
Place a little thermal silicone in each of the diode placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to take into account the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once lit.

LED Power Diode COB 5W 3000K White SMD features:


- Chip 28x47mil
- Voltage: 9-10V
- Current: 320mA
- Luminous flux: 240-360LM
- Emitting color: White
- Color temperature: aprox. 3000K
- Hot light
- Duration of life: 50,000 hours

Customers who bought this product also bought

Soldering Tip Cleaning Ball

It allows removing the solder residues from the tips.
It cleans better and does not cause temperature drops like with sponges.
You do not need extra water to clean the tip.
Easy and effective cleaning at the tip.
Soldering Tip Cleaning Ball features:
- Dimensions: diameter 50mm

H0010

Price €1.29

Silicone Thermal Paste Syringe 25g

Silicone Thermal Paste Syringe 25g features:
- Density at 20°C: 2.58 G/cm3
- Flashpoints: 350°C
- Freezing point: -50°C
- Coefficient of refraction: 1.405,
- Specific temperature at 50°C: 0.243 Cal/g K
- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K
- Constant dielectric at 100 Hz: 4.7 (± 0.1)
- Cross resistance: 5 x 10 to the power 14 Ohm x cm
- Loss rate at f = 100 Hz: 0.020 (± 0.003)
- Range of operating temperature: -50~200°C

Q0008

Price €4.79

Soldering Iron 40W

Soldering iron with B1 tip, ideal for electronics. Power of 40W.

- Power: 40W

- Power supply: 230V

- Equipped with B1 tip

- Long life tip: 1mm

- Anti-heat handle

- CE, RoHS and TÃœV certifications

H0002

Price €9.95

LED Diode COB 3W 3000K White SMD

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)
- the light intensity is greater without the need to concentrate the beam of light
- greater durability
- opening angle of up to 160ºC
- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.

P0144

Price €1.32

LED Power Diode COB 7W 3000K White SMD

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer.
Place a little thermal silicone in each of the diode placement centers.

P0143

Price €2.11
€2.11

1,74 tax excl.

Tax included 1
30+ items
Price €2.11

Order until 4pm we will send today
30 days return