Battery LIPO 190mAh 3.7V LITHIUM POLYMER BATTERY Battery LIPO 190mAh 3.7V features: -Battery type-lithium polymer. - Type of battery terminals- 3 cables. -Voltage of the battery-3.7 V -Capacity of the battery- 190 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Battery length / depth- 33 mm -Battery width / diameter- 44 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output. Code PP039 Available Price €3.05
Tower Pro Micro Servo 9G SG90 pack 10pcs Pack 10pcs of micro servo 9g SG90. Code R0014 ✗ Out-of-Stock Price €20.62
ESP-01 Esp-01 Esp8266 ESP01 WiFi USB Programmer Adaptor USB adapter that allows a direct USB connection to your ESP8266 ESP-01 or ESP-01S WiFi module. Based on the CH340 integrated circuit, which is a USB - Serial converter (UART). Code W0110 Available Price €2.60
XL6009 DC-DC Step-Up Booster Controller LM2577 - The XL6009 module has a superior performance than the LM2577 module - The regulator-booster of High performance Characteristic: - Based on the XL6009E1 regulator - Input voltage: 3V-32V, - Output voltage: 5-35V (adjustable), - Output current: 2A maximum 3A (heat sink is required) - Conversion efficiency: up to 94% - Rectifier: not synchronous rectification - Short circuit protection: current limitation, since recovery - Operating temperature: industrial grade (-40 ° C - 85 ° C) - Load regulation: ± 0.5% - Voltage regulation: ± 0.5% - Size: 50 x 22 x 15 mm Code A0005 Available Price €2.02
DSC321 AT24C32 with Real Time Clock RTC Battery RTC DS3231 clock module with EEPROM 32k.High precision RTC module.Can be used in projects of Arduino, PIC, AVR, STM32 and other.DSC321 AT24C32 with Real Time Clock RTC Battery features:- Based on DS3231- EEPROM AT24C32 (32K)- I2C interface- LED work indicator- Includes CR2032 3V battery Code M0004 Available Price €3.71
SD Card Module Reader The SD card reader module is a simple solution for transferring data to and from a standard SD card.The pinout is directly compatible with Arduino, but it can also be used with other microcontrollers.SD Card Module Reader features:- Supply voltage: 3.3V or 5V - Interface: SPI 3.3V- Dimensions: 30mm x 50mm x 12mm Code M0023 Available Price €0.82
PowerBank 20000mAh 22.5W PD QC3.0 AFC Power Bank 20000 mAh hasta 22,5 W Joyroom, compatible con tecnologías de carga rápida (PD, QC 3.0, AFC) El Power Bank Joyroom JR-QP192 tiene 4 puertos integrados: 1 entrada micro USB, 2 salidas USB y 1 entrada/salida USB C. Code KH020 Available Regular price €21.40 -€2.00 Price €19.40
Female Strip 40 Short Pins Female Strip 40 Short Pins features: - Pin spacing: 2.54mm - Insert position: Vertical - Insert: Pasante - Quantity: 1 unit of strips of 40 female pins each Code K0139 Available Price €0.57
Battery charger for 12V 3A gel batteries Battery charger for 12V gel batteries with battery state of charge monitoring. Alligator clip connectors. Code A0131 Available Price €9.01
Type-C High Power Fast Charging Module DC 5V 9V 12V 20W Wireless charging and powering of small electronic products. It is designed for small size, ease of use, high performance and low price. Type-C High Power Fast Charging Module DC 5V 9V 12V 20W Wireless Charger Transmitter Circuit Coil Charger Board 0-8mm max 10mm Code A0176 Available Price €9.05
Wireless charger module 5V 1V with transmitter coil. Wireless charging and powering of small electronic products. It is designed for small size, ease of use, high performance and low price. The main purpose of the module is to be used in the initial phase of projects such as mobile electronic products. Code A0175 Available Price €6.57
TP4056 Module Lithium Battery Charger with Protection Micro USB TP4056 Module Lithium Battery Charger with Protection features: - TP4056 Li-Ion Micro USB Charger - Upgraded version of previous TP4056 - Micro USB connection to charge directly from the PC - Ideal for 18650 batteries - Based on the TC4056A regulator - Input Voltage: 4.5V - 5.5V DC - Full charge voltage: 4.2V +/- 1.5% - Max Output Current: 1A - Overvoltage protection 4.2V - Over discharge protection 2.4V - LED indicator: charging blue, charging red - Operating temperature: -10ºC to + 85ºC - IN + and IN- connection for electronic circuits - Overcurrent protection: 3A - Measurements 26 x 19 x 5 mm - Possibility of current change through Rprog Code A0026 Available Price €1.40
Wireless charger module 5V 2V with transmitter coil. Wireless charging and powering of small electronic products. It is designed for small size, ease of use, high performance and low price. The main purpose of the module is to be used in the initial phase of projects such as mobile electronic products. Code A0174 Available Price €7.40
Quick charger for 2 Xtar SC2 18650 Li-ion cylindrical 18650 batteries Compact and fast processor charger Xtar SC2 for rechargeable Li-ion batteries of size 18650 and other sizes. Code H0540 ✗ Out-of-Stock Price €13.14
Battery charger BMS 3,7-96V 10A - Automatic charge controller module This 3.7-96V 10A battery charger is an automatic charge controller module that prevents the battery from dropping below a voltage level, the value of which is adjustable. It is suitable for 1.5 to 120V batteries, as using it will save time and energy. Code A0130 Available Price €9.01
PowerBank 20000mAh 22.5W PD QC3.0 AFC Power Bank 20000 mAh hasta 22,5 W Joyroom, compatible con tecnologías de carga rápida (PD, QC 3.0, AFC) El Power Bank Joyroom JR-QP192 tiene 4 puertos integrados: 1 entrada micro USB, 2 salidas USB y 1 entrada/salida USB C. Code KH020 Available Regular price €21.40 -€2.00 Price €19.40
Car battery tester and charger Konnwei KW510 The Konnwei KW510 is an advanced multi-function device that uses state-of-the-art technology to allow you to easily, quickly and accurately measure the actual cold start capability, battery condition and common faults in the vehicle's starting and charging systems. The KW510 is particularly useful for workshops as it can accurately detect the problem, allowing the vehicle to be repaired quickly. Code H0586 Available Price €57.81
Charger 2x18650 with EU Plug Cable Charger 2x18650 with EU Plug Cable features: - This product is very convenient and easy to use- Black- Material: metal and plastic- Weight: 74g- Input voltage: AC 100 -240 V 50/60 Hz- Compatible with: 18650 Li-ion- When the 18650 battery is connected to the charger, the red LED light will be displayed, and means green in full charge status- Output: DC 4.2 V, 1A- Plug: EU plug- Cable length: 38cm- The battery are not included Code A0081 Available Price €3.79
Battery charger for 12V 3A gel batteries Battery charger for 12V gel batteries with battery state of charge monitoring. Alligator clip connectors. Code A0131 Available Price €9.01
Type-C High Power Fast Charging Module DC 5V 9V 12V 20W Wireless charging and powering of small electronic products. It is designed for small size, ease of use, high performance and low price. Type-C High Power Fast Charging Module DC 5V 9V 12V 20W Wireless Charger Transmitter Circuit Coil Charger Board 0-8mm max 10mm Code A0176 Available Price €9.05
Wireless charger module 5V 1V with transmitter coil. Wireless charging and powering of small electronic products. It is designed for small size, ease of use, high performance and low price. The main purpose of the module is to be used in the initial phase of projects such as mobile electronic products. Code A0175 Available Price €6.57
TP4056 Module Lithium Battery Charger with Protection Micro USB TP4056 Module Lithium Battery Charger with Protection features: - TP4056 Li-Ion Micro USB Charger - Upgraded version of previous TP4056 - Micro USB connection to charge directly from the PC - Ideal for 18650 batteries - Based on the TC4056A regulator - Input Voltage: 4.5V - 5.5V DC - Full charge voltage: 4.2V +/- 1.5% - Max Output Current: 1A - Overvoltage protection 4.2V - Over discharge protection 2.4V - LED indicator: charging blue, charging red - Operating temperature: -10ºC to + 85ºC - IN + and IN- connection for electronic circuits - Overcurrent protection: 3A - Measurements 26 x 19 x 5 mm - Possibility of current change through Rprog Code A0026 Available Price €1.40
Wireless charger module 5V 2V with transmitter coil. Wireless charging and powering of small electronic products. It is designed for small size, ease of use, high performance and low price. The main purpose of the module is to be used in the initial phase of projects such as mobile electronic products. Code A0174 Available Price €7.40
Quick charger for 2 Xtar SC2 18650 Li-ion cylindrical 18650 batteries Compact and fast processor charger Xtar SC2 for rechargeable Li-ion batteries of size 18650 and other sizes. Code H0540 ✗ Out-of-Stock Price €13.14
Battery charger BMS 3,7-96V 10A - Automatic charge controller module This 3.7-96V 10A battery charger is an automatic charge controller module that prevents the battery from dropping below a voltage level, the value of which is adjustable. It is suitable for 1.5 to 120V batteries, as using it will save time and energy. Code A0130 Available Price €9.01
PowerBank 20000mAh 22.5W PD QC3.0 AFC Power Bank 20000 mAh hasta 22,5 W Joyroom, compatible con tecnologías de carga rápida (PD, QC 3.0, AFC) El Power Bank Joyroom JR-QP192 tiene 4 puertos integrados: 1 entrada micro USB, 2 salidas USB y 1 entrada/salida USB C. Code KH020 Available Regular price €21.40 -€2.00 Price €19.40
Car battery tester and charger Konnwei KW510 The Konnwei KW510 is an advanced multi-function device that uses state-of-the-art technology to allow you to easily, quickly and accurately measure the actual cold start capability, battery condition and common faults in the vehicle's starting and charging systems. The KW510 is particularly useful for workshops as it can accurately detect the problem, allowing the vehicle to be repaired quickly. Code H0586 Available Price €57.81
Charger 2x18650 with EU Plug Cable Charger 2x18650 with EU Plug Cable features: - This product is very convenient and easy to use- Black- Material: metal and plastic- Weight: 74g- Input voltage: AC 100 -240 V 50/60 Hz- Compatible with: 18650 Li-ion- When the 18650 battery is connected to the charger, the red LED light will be displayed, and means green in full charge status- Output: DC 4.2 V, 1A- Plug: EU plug- Cable length: 38cm- The battery are not included Code A0081 Available Price €3.79