Wall charger 2x USB 5V / 2.4A + USB Type-C cable white Wall charger with 2 USB ports with small size and low weight. Code KH010 Available Price €5.99
Flux Gel Jeringa 1.4cm3 RMA Soldering BGA SMD SMT Flux gel syringe 1.4cm3 of RMA class, intended for SMT assembly and repairs. Flux gel can be applied through a sieve, pattern or from a syringe. Activators utilized in flux manufacturing process enable to leave its remnants after soldering on the package (as far as the process does not include washing phases). Code Q0018 Available Price €2.49
L298N Motor Drive Controller Board Module Dual H Bridge DC It allows controlling up to 2 direct current motors or a bipolar stepper motor. It also allows to control a unipolar stepper motor configured as bipolar.Ideal for projects with ARDUINO.You can use it with PIC, AVR, STM32. L298N Motor Drive Controller Board Module Dual H Bridge DC features: - Minimum operating voltage: 5 V- Maximum operating voltage: 35 V- Maximum current: ± 2 A- Logic voltage: 5V- PWM signal inputs for speed control- Outputs: for 2 DC motors or for a bipolar stepper motor- Measures: 43x43x24 mm Helpful Links: Operation of the robot by Infrared / Operation of the robot by Bluetooth / Automatic operation with detection of obstacles Code M0100 Available Price €2.79
TinkerKit Braccio Robot Arduino - Robot Arm 6 DOF The Tinkerkit Braccio Robot, is a fully operational and functional robot arm, with 6 degrees of freedom, easily controlled through Arduino. It can be assembled in different ways to use it in the applications that are required, such as moving objects, connecting a camera or a solar panel. Discover the unlimited potential of robotics and mechanics with BRACCIO! Code T050000 Available Regular price €286.49 -€30.00 Price €256.49
TP4056 Lithium Battery Charger Module 5V Micro USB TP4056 5V Micro USB Lithium Battery Charger Module features: - Based on TP4056ES regulator - Lipo micro USB Li-Ion charger - Input Voltage: 4.5V - 5.5 VDC - Full charge voltage: 4.2V +/- 1.5% - Max Output Current: 1A - Indicator LED: charging red, charging green - Operating temperature: -10ºC to + 85ºC - IN + and IN- connection for electronic circuits - Battery protection against over-discharge voltage: 2.5V - Protection against over current battery: 3A - Measurements: 25x19x5 mm - Ideal for 18650 batteries Code A0100 Available Price €0.99
Solder Wire Tin Sn60Pb40 Lead 2.5% Flux 0.7mm 100g Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 0.7mm features: - 100gr. 0.7mm diameter welding wire. 60% tin and 40% lead- Fusing temperature 183 „ƒ / 190 „ƒ- Alloy Sn60 Pb40- Flux 2.5%- Quantity: 1 unit Code Q0104 ✗ Out-of-Stock Price €8.95
Battery charger BMS 3,7-96V 10A - Automatic charge controller module This 3.7-96V 10A battery charger is an automatic charge controller module that prevents the battery from dropping below a voltage level, the value of which is adjustable. It is suitable for 1.5 to 120V batteries, as using it will save time and energy. Code A0130 Available Price €10.90
Waterproof Electronic ABS Plastic Junction Prototype Box 115x90x55 mm Waterproof Electronic ABS Plastic Junction Prototype Box 115x90x55 features: - Excellent waterproof performance and moisture proof- Dimension 115x90x55 mm Code H0119 Available Price €3.89
Charger 2x18650 with EU Plug Cable Charger 2x18650 with EU Plug Cable features: - This product is very convenient and easy to use- Black- Material: metal and plastic- Weight: 74g- Input voltage: AC 100 -240 V 50/60 Hz- Compatible with: 18650 Li-ion- When the 18650 battery is connected to the charger, the red LED light will be displayed, and means green in full charge status- Output: DC 4.2 V, 650mA- Plug: EU plug- The battery are not included Code A0082 Available Price €3.50
Wireless charger module 5V 1V with transmitter coil. Wireless charging and powering of small electronic products. It is designed for small size, ease of use, high performance and low price. The main purpose of the module is to be used in the initial phase of projects such as mobile electronic products. Code A0175 Available Price €7.95
Charger 2x18650 with EU Plug Cable Charger 2x18650 with EU Plug Cable features: - This product is very convenient and easy to use- Black- Material: metal and plastic- Weight: 74g- Input voltage: AC 100 -240 V 50/60 Hz- Compatible with: 18650 Li-ion- When the 18650 battery is connected to the charger, the red LED light will be displayed, and means green in full charge status- Output: DC 4.2 V, 1A- Plug: EU plug- Cable length: 38cm- The battery are not included Code A0081 Available Price €4.59
5V 2A USB-C lithium battery charger module The high-precision 5V2A charger for Li-Ion 18650 batteries has a USB-C connection for powering the module. It is also equipped with a USB-A connection for charging. Code A0171 Available Price €1.95
TP4056 Lithium Battery Charger Module 5V Mini USB TP4056 Lithium Battery Charger Module 5V mini USB features: - Based on TP4056ES regulator - Lipo mini USB Li-Ion charger - Input Voltage: 4.5V - 5.5 VDC - Full charge voltage: 4.2V +/- 1.5% - Max Output Current: 1A - Indicator LED: charging red, charging green - Operating temperature: -10ºC to + 85ºC - IN + and IN- connection for electronic circuits - Battery protection against over-discharge voltage: 2.5V - Protection against over current battery: 3A - Measurements: 25x19x5 mm - Ideal for 18650 batteries Code A0008 Available Price €0.99
Wireless charger module 5V 2V with transmitter coil. Wireless charging and powering of small electronic products. It is designed for small size, ease of use, high performance and low price. The main purpose of the module is to be used in the initial phase of projects such as mobile electronic products. Code A0174 Available Price €8.95
Charger 4 x 9V 6F22 with EU Power Supply Cable Charger 4 x 9V 6F22 with EU Power Supply Cable features: The everActive NC 109 charger is a unique, specialized design that allows you to charge from 1 to 4 pieces of 9V Ni-MH batteries - each cell is charged individually.It allows you to charge up to 4pcs of 9V batteries simultaneously, in any configuration / combination, with any capacity, any manufacturer.The charger has 4 independent charging channels.The most important features: of the NC109 loader:- quick charging of a large number of batteries simultaneously - ideal for industrial and professional applications,- individual LED indicator of charger work for each cell - with full charge signaling,- 100-240V AC power adapter included, optionally a 12V car adapter is available, Code A0101 Available Price €17.99
4S BMS 25A 16.8V 18650 PCM PCB Circuit Charging Module In the case of a battery pack, the BMS (Battery Management System) balancing protection circuit allows charging and discharging to be individually controlled. That is, the circuit controls that all cells are charged and discharged at approximately the same voltage. The current during charging should be limited, because the cell will "absorb" the current given to it, but a higher current than the one established by the manufacturer (generally a safe current is 1C ) can cause the cell to overheat and, in extreme cases, explode. The same relationship also applies to discharge. Code A0107 Available Price €4.59
Solar Power Management Module, for 6V~24V Solar Panel The solar power management module is designed for 6V~24V solar panel. It can charge Li 3.7V battery through solar panel or USB connection, and provides 5V/1A regulated output. Code WV002 Available Price €12.95
MCP73831 - Li-Pol/Li-Ion single cell 1S 3.7V USB charger - Adafruit 1304 Charger for 1-cell lithium-polymer batteries with a nominal voltage of 3.7 V and lithium-ion batteries. The chip is powered via a USB plug, which can be connected directly to a computer socket or a power supply. Code AD002 Backorder Price €9.99
Charger 2x18650 with EU Plug Cable Charger 2x18650 with EU Plug Cable features: - This product is very convenient and easy to use- Black- Material: metal and plastic- Weight: 74g- Input voltage: AC 100 -240 V 50/60 Hz- Compatible with: 18650 Li-ion- When the 18650 battery is connected to the charger, the red LED light will be displayed, and means green in full charge status- Output: DC 4.2 V, 650mA- Plug: EU plug- The battery are not included Code A0082 Available Price €3.50
Wireless charger module 5V 1V with transmitter coil. Wireless charging and powering of small electronic products. It is designed for small size, ease of use, high performance and low price. The main purpose of the module is to be used in the initial phase of projects such as mobile electronic products. Code A0175 Available Price €7.95
Charger 2x18650 with EU Plug Cable Charger 2x18650 with EU Plug Cable features: - This product is very convenient and easy to use- Black- Material: metal and plastic- Weight: 74g- Input voltage: AC 100 -240 V 50/60 Hz- Compatible with: 18650 Li-ion- When the 18650 battery is connected to the charger, the red LED light will be displayed, and means green in full charge status- Output: DC 4.2 V, 1A- Plug: EU plug- Cable length: 38cm- The battery are not included Code A0081 Available Price €4.59
5V 2A USB-C lithium battery charger module The high-precision 5V2A charger for Li-Ion 18650 batteries has a USB-C connection for powering the module. It is also equipped with a USB-A connection for charging. Code A0171 Available Price €1.95
TP4056 Lithium Battery Charger Module 5V Mini USB TP4056 Lithium Battery Charger Module 5V mini USB features: - Based on TP4056ES regulator - Lipo mini USB Li-Ion charger - Input Voltage: 4.5V - 5.5 VDC - Full charge voltage: 4.2V +/- 1.5% - Max Output Current: 1A - Indicator LED: charging red, charging green - Operating temperature: -10ºC to + 85ºC - IN + and IN- connection for electronic circuits - Battery protection against over-discharge voltage: 2.5V - Protection against over current battery: 3A - Measurements: 25x19x5 mm - Ideal for 18650 batteries Code A0008 Available Price €0.99
Wireless charger module 5V 2V with transmitter coil. Wireless charging and powering of small electronic products. It is designed for small size, ease of use, high performance and low price. The main purpose of the module is to be used in the initial phase of projects such as mobile electronic products. Code A0174 Available Price €8.95
Charger 4 x 9V 6F22 with EU Power Supply Cable Charger 4 x 9V 6F22 with EU Power Supply Cable features: The everActive NC 109 charger is a unique, specialized design that allows you to charge from 1 to 4 pieces of 9V Ni-MH batteries - each cell is charged individually.It allows you to charge up to 4pcs of 9V batteries simultaneously, in any configuration / combination, with any capacity, any manufacturer.The charger has 4 independent charging channels.The most important features: of the NC109 loader:- quick charging of a large number of batteries simultaneously - ideal for industrial and professional applications,- individual LED indicator of charger work for each cell - with full charge signaling,- 100-240V AC power adapter included, optionally a 12V car adapter is available, Code A0101 Available Price €17.99
4S BMS 25A 16.8V 18650 PCM PCB Circuit Charging Module In the case of a battery pack, the BMS (Battery Management System) balancing protection circuit allows charging and discharging to be individually controlled. That is, the circuit controls that all cells are charged and discharged at approximately the same voltage. The current during charging should be limited, because the cell will "absorb" the current given to it, but a higher current than the one established by the manufacturer (generally a safe current is 1C ) can cause the cell to overheat and, in extreme cases, explode. The same relationship also applies to discharge. Code A0107 Available Price €4.59
Solar Power Management Module, for 6V~24V Solar Panel The solar power management module is designed for 6V~24V solar panel. It can charge Li 3.7V battery through solar panel or USB connection, and provides 5V/1A regulated output. Code WV002 Available Price €12.95
MCP73831 - Li-Pol/Li-Ion single cell 1S 3.7V USB charger - Adafruit 1304 Charger for 1-cell lithium-polymer batteries with a nominal voltage of 3.7 V and lithium-ion batteries. The chip is powered via a USB plug, which can be connected directly to a computer socket or a power supply. Code AD002 Backorder Price €9.99