Thermally Conductive Silicone Paste H 100g Thermally Conductive Silicone Paste H facilitates the transfer of calories between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors. Code Q0038 Last items in stock Price €5.49
Thermally Conductive Silicone Paste H 7g Thermally Conductive Silicone Paste H facilitates the transfer of heat between the electronic components and the radiator. It is necessary for the correct operation of any type of temperature sensors. Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K Code Q0051 Available Price €1.45
Spray Contact Cleaner Kontakt S 300ml Spray Contact Cleaner 300ml features:A preparation for removing oxides and sulfides from electric contacts and for providing protection against corrosion, ensures non-obstructed electricity flow especially in the case of oxidized or worn contacts, can be used in audio products -high and low-frequency, electronic industry and in other places where clean contacts are required. - Restores low resistance in connections- Has cleaning properties- Used in audio technologies- Protection against moisture and corrosion- Prevents stray current Code Q0023 Available Price €4.79
Silicone Thermal Conductive Paste H 0.5g Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:It facilitates the transfer of heat between the electronic components and the radiator.It's necessary for the correct operation of any type of temperature sensors.Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.-Density at 20°C: 2.58 G/cm3-Points: 350°C-Freezing point: -50°C-Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K-Constant dielectric at 100 Hz: 4.7 (± 0.1)-Cross resistance: 5x10 to power 14 Ohm x cm Code Q0080 Available Price €0.59
Electrical Contacts Cleaner Spray + Brush Kontakt S 400ml A preparation to remove oxides and sulphites from electrical contacts and to provide protection against corrosion, ensures the flow of electricity especially in case of rusty or worn contacts.It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.For cleaning contacts, electrical terminals, alternators, switches, plugs, sockets integrated circuits, lampholders, fuseholders, capacitor contacts, flowmeters etc. 400ml Electrical Contacts Cleaner Spray + Brush features: - Restores low resistance in connections- Used in audio technologies- Protection against moisture and corrosion- High quality - manufactured in EU Code Q0028 Available Price €6.99
Flux BORAX 500g Flux BORAX Unblocker features: Flux for soldering and welding with brazing solders. Dissolves metal oxides and facilitates bonding of solder with soldered material. Borax occurs as fine crystalline without fluorides. Code Q0066 ✗ Out-of-Stock Price €3.95
Compressed Gas 300ml Spray Cleaner Compressed Air 300ml Spray Cleaner features: - Cleaning computers, keyboards, electronics, printers- All types of office material- Made in the EU - HIGH QUALITY- When using the cleaner, remember to turn off your electronic devices and wait until the gas has evaporated before turning on the devices Code Q0026 Available Price €3.95
Compressed gas 600ml Spray Cleaner Compressed gas 600ml Spray Cleaner features: - Cleaning computers, keyboards, electronics, printers- All types of office material- Made in the EU - HIGH QUALITY- When using the cleaner, remember to turn off your electronic devices and wait until the gas has evaporated before turning on the devices Code Q0101 Available Price €6.59
Thermal Paste Syringe 3.1W / mK - AG Copper Copper-based thermal paste designed to improve processor cooling Thermal Paste Syringe 3.1W / mK CPU features: - The thermal conductivity of ~ 3.1 W/mK- Not suitable for aluminum radiators- No driver- 1,5ml content Code Q0042 Available Price €2.95
Electrical Contacts Cleaner Spray Kontakt S 60ml A preparation to remove oxides and sulphites from electrical contacts and protection against corrosion.It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.For cleaning contacts, electrical terminals, alternators, switches, sockets, sockets, integrated, lampholders, fuseholders, capacitor contacts, flowmeters, etc. Electrical Contacts Cleaner Spray 60ml features: - Restores low resistance in connections- Used in audio technologies- Protection against moisture and corrosion- High quality - Made in EU- No to the most usual materials of electrical systems Code Q0019 ✗ Out-of-Stock Price €2.49
Potentiometer Cleaner - Spray 60ml Potentiometer Cleaner - Spray 60ml features: A special preparation for potentiometers, perfectly suited to remove any dirt deposited during the operation of the device, contains a special grease to reduce friction. It cleans waste contacts, also regenerates them. Code Q0030 Available Price €2.95
Cleaning of AG Printer Spray 400ml Cleaning of AG Printer Spray 400ml features: - An agent for cleaning printing mechanisms in printers (mechanisms feeding paper, printing head drive components etc.), cleans print heads in needle printers, it does not react with plastics used in printers Code Q0061 ✗ Out-of-Stock Price €4.29
Cleaning liquid for white boards 250ml Liquid for cleaning LED boards.The fluid quickly and effectively cleans even the most persistent dirt on the surface of the boards.Eliminates traces of marker, scratches and discoloration resulting from long term use of the board. Cleaning liquid for LED boards 250ml features: - Manufacturer: AG Chemia, Content: - A 250ml aerosol. Code Q0100 Last items in stock Price €4.79
Ultrasonic Cleaning Liquid Termosonik 1 litre Ultrasonic Cleaning Liquid 1 litre features: Suitable for use in ultrasonic baths, this cleaner completely removes all traces of contamination including light oils, silicones, etc. Code Q0055 ✗ Out-of-Stock Price €14.95
Microfiber Cleaning Cloth Microfiber Cleaning Cloth features: - Microfiber cleaning cloth is perfect for cleaning laptops, screens, keyboards, computer casings, printers, copying machines, scaners, phones, telefaxing machines as well as other such devices. Cleans firmly without leaving stains and smudges Code Q0067 Last items in stock Price €2.79
Adhesive Thermal Paste Glue 10g CPU Totally new and of high quality.Dissipate the heat of the computer by refrigerating it effectively.It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features: - Color white- Surface drying time [25 ° C, min]: 2- 8- Hardness: 45 -75- Tensile strenght (Mpa): 2.0- Elongation (%): 100- Thermal Conductivity W / mk:> 1,0- Volume Resistance (c-in / W): <2.0 x 10 * 15- Dielectric strength (KV / mm): 20- Dielectric Constant: 3.0- Dielectric loss factor (60Hz): 0.003- Operating temperature (max): 200 ° C Code Q0006 Available Price €3.95
Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Available Price €4.79
Thermal conductive paste HP 340°C 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Available Price €10.99
Thermally Conductive Silicone Paste HP 7g Thermally Conductive Silicone Paste facilitates the transfer of heat between the electronic components and the radiator. It is necessary for the correct operation of any type of temperature sensors. It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Code Q0146 Available Price €2.49