Thermally Conductive Silicone Paste H 100g Thermally Conductive Silicone Paste H facilitates the transfer of calories between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors. Code Q0038 Last items in stock Price €5.49
Thermally Conductive Silicone Paste H 7g Thermally Conductive Silicone Paste H facilitates the transfer of heat between the electronic components and the radiator. It is necessary for the correct operation of any type of temperature sensors. Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K Code Q0051 Available Price €1.45
Graphite Varnish 2x1.5ml Graphite Varnish cCan be used for the elimination of discontinuities in the graphite layer in printed circuits. Creation or reconstruction of routes in printed circuits of low intensity. Protection of silver contacts from harmful direct contact of silver with rubber (in remote controls) Code Q0073 Available Price €3.89
Silicone Thermal Conductive Paste H 0.5g Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:It facilitates the transfer of heat between the electronic components and the radiator.It's necessary for the correct operation of any type of temperature sensors.Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.-Density at 20°C: 2.58 G/cm3-Points: 350°C-Freezing point: -50°C-Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K-Constant dielectric at 100 Hz: 4.7 (± 0.1)-Cross resistance: 5x10 to power 14 Ohm x cm Code Q0080 Available Price €0.59
Transparent Insulating PCB Varnish 60 1 Liter Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Transparent Insulating PCB Varnish 60 1 Liter features: - A protective film, transparent- Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination- It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the protective film- PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors- Application temperature: od -40 ° C + 60 ° C Code Q0046 Backorder Price €21.09
PVB 60 Varnish Transparent Insulation 50ml Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. PVB Varnish 60 Transparent Insulation 50ml features: A protective film, transparent.Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination.Maintains welding, to perform a subsequent welding is not necessary to remove the protective film.PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors.-Temperature of application: -40°C + 60°C.-Operating temperature: -50°C + 150°C. Code Q0033 ✗ Out-of-Stock Price €3.15
Insulating Varnish Spray 400ml Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Insulating Varnish Spray 400ml features:-A protective film, transparent.-Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination-It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate theprotective film-PVB 16 is used, for example, in the storage of printed circuit boards and material that is going to besoldier, such as welding terminals or conductors.-Temperature of application: od -40 ° C + 60 ° C. Code Q0014 Last items in stock Regular price €11.29 -€1.30 Price €9.99
Thermal Paste Syringe 3.1W / mK - AG Copper Copper-based thermal paste designed to improve processor cooling Thermal Paste Syringe 3.1W / mK CPU features: - The thermal conductivity of ~ 3.1 W/mK- Not suitable for aluminum radiators- No driver- 1,5ml content Code Q0042 Available Price €2.95
Adhesive Thermal Paste Glue 10g CPU Totally new and of high quality.Dissipate the heat of the computer by refrigerating it effectively.It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features: - Color white- Surface drying time [25 ° C, min]: 2- 8- Hardness: 45 -75- Tensile strenght (Mpa): 2.0- Elongation (%): 100- Thermal Conductivity W / mk:> 1,0- Volume Resistance (c-in / W): <2.0 x 10 * 15- Dielectric strength (KV / mm): 20- Dielectric Constant: 3.0- Dielectric loss factor (60Hz): 0.003- Operating temperature (max): 200 ° C Code Q0006 Available Price €3.95
Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Available Price €4.79
Thermal conductive paste HP 340°C 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Available Price €10.99
PVB Varnish 16 Spray 100ml Necessary for the protection of printed circuits. PCB varnish of high quality for manufacturing, repair and maintenance. Code Q0117 Available Price €4.65
Thermally Conductive Silicone Paste HP 7g Thermally Conductive Silicone Paste facilitates the transfer of heat between the electronic components and the radiator. It is necessary for the correct operation of any type of temperature sensors. It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Code Q0146 Available Price €2.49