Internet and Wireless modules

Antenna with Magnetic Base Male GSM GPRS 3G 800MHz 1800MHz 1900MHz 7dBI SMA features:
- Standard: GSM / GPRS / 3G
- Frequency range: 800 ~ 1900MHz
- Interface: SMA male
- Gain: 7dBi
- Length of the antenna: 20cm
- V.S.W.R .: <1.5
- Impedance (ohm): 50
- Maximum input power (W): 100W
- Operating temperature: -40ºC ~ + 70ºC

NFC Card Type 2 NTAG215 RFID Dual Label 13.56 MHz features:
- Standard: NFC Forum Type2 Tag Ntag215
- Protocol: ISO14443A
- Memory: 540B (504B) EEPROM - Operating frequency: 13.56MHZ
- Reading distance: 0-10CM
- Communication speed: 106Kboud
- Working temperature: -20ºC to 70ºC
- Number of uses 100,000 times
- Data retention: 10 years
- Material: PVC
- Dimensions 86 x 54 x 0.84 mm

Low Loss Coax Cable H-155 2.4GHz WiFi LTE GSM features:
- The cable is used for system transmissions
2.4 [GHz] (WiFi, LTE, 3G, GPS)
- It is also suitable for the lower frequencies (CB, GSM, PMR)
- It has less loss than the type RG-58 cable
- Type of coaxial cable
- H155 cable series
- 50Ω wave impedance
- Stranded core structure
- Core type Cu
- Structure of the laminated Al-PET shield, tinned copper braid
- PVC external insulation material
- Gray insulation color
- Outer cable dimensions Ø5.4mm
- Operating temperature -15 ... 70 ° C
- Resistance to weather conditions
- Installation of 2.4 GHz antenna cable, outdoor
- Attenuations [dB / 100m]:
* 50 [MHz] - 6.5
* 100 [MHz] - 9.3

Universal Magnetic Antenna Connector Male Plug SMA 150cm GPS features:
- Standard: GPS 1575.42 MHz
- Voltage: 3 ~ 5V
- Current: max 10mA
- Interface: SMA male
- Polarization: circular (right)
- LNA gain (without cable): 28dB typ
- Noise figure: 1.5dB typ
- Operating temperature: -40'C ~ + 85'C
- Cable length 150cm
- Dimensions: 49 x38 x16 mm

NFC RFID Tag Card 13.56 MHz can be used in Access Control projects and Alarm, Arduino, Raspberry PI, PIC, AVR projects.

Can be used in Access Control projects and Alarm, Arduino, Raspberry PI, PIC, AVR projects 10x NFC RFID round card 13.56 MHz features:
- 32 bit unique code
- Protocol: ISO14443
- Compatible with Mifare S50 Classic
- Memory: 1kB EEPROM
- Operating frequency: 13.56MHz
- Communication speed: 106Kboud
- Reading distance: 2.5-10CM
- Reading time: 1-2MS
- Working temperature: -20 ºC to 85 ºC
- Number of uses 100,000 times
- Data retention: 5 years
- Material: PVC
- Dimensions: Ø 25 x 0.8 mm
- Quantity: 10 units of NFC 13.56MHz card

Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino features:
- Can be connected with the ESP8266 module with ipex
- Standard: 2.4GHz
- Frequency range: 2400 ~ 2500MHz
- Interface: SMA
- Gain: 3dBi
- Length of the antenna: 10cm
- V.S.W.R.: <1.5
- Polarization: Vertical
- No Circularity (dB): +/- 0.5
- Impedance (ohm): 50
- Maximum input power (W): 50W
- Operating temperature: -40'C ~ + 70'C

Can be connected with the ESP8266 module with IPEX
Compatible with Hirose U.FL and IPEX MHF1 Adapter SMA Female GPS GSM IPEX 2.4 Ghz RF ESP8266 1.13mm 50 Ohm features:
- Frequency range: 0 ~ 6000MHz
- Interface: SMA female connector
- IPEX female connector
- Cable length: 15cm
- Coaxial cable: 1,13mm
- V.S.W.R.: <1.5
- Impedance (ohm): 50
- Maximum input power (W): 50W
- Operating temperature: -40ºC ~ + 70ºC

Can be connected with the ESP8266 module with Ipex
Compatible with Hirose U.FL and IPEX MHF1 Male Pigtail Adapter IPEX SMA 2.4GHz 1.13mm 50 Ohm GPS GSM WiFi RF features:
- Frequency range: 0 ~ 6000MHz
- Interface: SMA male connector
- IPEX female connector
- Cable length: 15cm
- Coaxial cable: 1.13mm
- V.S.W.R.: <1.5
- Impedance (ohm): 50
- Maximum input power (W): 50W
- Operating temperature: -40'C ~ + 70'C

It is compatible with almost any microcontroller, Arduino, PIC, AVR.
It can be used in Access Control projects and Alarm projects. RFID Module with Card and Pendant features:
- Supports Quick CRYPTO1 and MIFARE
- Operating current: 13-26mA at 3.3V
- Standby current: 10-13mA to 3.3V
- Sleep-mode current: <80μA
- Maximum current: 30mA
- Frequency of operation: 13.56Mhz
- Reading distance: 0 to 60mm
- Communication protocol: SPI
- Maximum SPI speed: 10Mbit / s
- Maximum data rate: 10Mbit / s
- Operating temperature: -20 to 80ºC
- Humidity of operation: 5% -95%

NFC RFID Keychain Tag 13.56 MHz features:
- 32 bit unique code
- Protocol: ISO14443
- Compatible with NFC Mifare 1k
- Memory: 1kB EEPROM
- Operating frequency: 13.56MHZ
- Communication speed: 106Kboud
- Reading distance: 2.5-10CM
- Reading time: 1-2MS
- Working temperature: -20ºC to 85ºC
- Number of uses 100,000 times
- Data retention: 10 years
- Material: ABS
- Dimensions 40.5 x 32 x 4.2 mm

Antenna 2.4GHz WiFi Bluetooth 4dBi IPEX ESP8266 Zigbee features:
- Works with ESP8266 Zigbee Arduino
- Can be connected with the ESP8266 module with ipex
- Standard: 2.4GHz
- Frequency range: 2100 ~ 2600MHz
- Interface: IPEX
- Gain: 4dBi +/- 0.7dBi
- Length of the antenna: 10cm
- V.S.W.R.: <2
- Polarization: Vertical
- No Circularity (dB): +/- 0.5
- Impedance (ohm): 50
- Operating temperature: -40'C ~ + 65'C

NFC module for Educational STEAM Kit.  Near field communication (NFC) is a set of standards for smartphones and similar devices to establish radio communication with each other by touching them together or bringing them into close proximity, usually no more than a few centimeters. Compatible with almost any microcontroller, Arduino, PIC, AVR. It can be used in Access Control projects and Alarm projects. RFID PN532 NFC Module with Card and Pendant features:
- Support i2C, SPI, High Speed UART - Support RFID reading and writing - Support P2P communication with peers - Support NFC with phone - Work in NFC Mode or RFID reader/writer Mode - RFID reader/writer supports: - 1k, 4k, Ultralight, and DesFire cards ISO/>

Antenna GSM GPRS 3G IPEX features:
- PCB Antenna 2dBi Ipex U.fl 50 Ohm
- Standard: 2G 3G IPEX Antenna
- Frequency range: 700-960 MHz and ‰¤ 5; 1710-1800 MHz; 1800-1990 MHz
- Interface: IPEX
- Gain: 2dBi +/- 0.7dBi
- Length of the antenna: 10cm
- V.S.W.R.: <3.0 @ 780 ~ 960 MHz &
  <= 3.5 @ 1710 ~ 2170 MHz
- Polarization: Vertical
- No Circularity (dB): +/- 0.5
- Impedance (ohm): 50
- Operating temperature: -40'C ~ + 65'C

NFC module for Educational STEAM Kit.  Near field communication (NFC) is a set of standards for smartphones and similar devices to establish radio communication with each other by touching them together or bringing them into close proximity, usually no more than a few centimeters. Compatible with almost any microcontroller, Arduino, PIC, AVR. It can be used in Access Control projects and Alarm projects. RFID PN532 NFC Module features:
- Based on the NXP PN532 chip, it can be used for non-contact communication of 13.56M.
- Greater effective communication distance of 3 cm.

A waterproof pentaband antenna X000016  for all your wireless projects with Arduino and development boards

The 19.5cm antenna can be connected to the ESP8266 module with ipex. It works on LoRa 433/868/915 MHz frequencies with SMA interface.