Speed controller for DC motor (PWM) 6V-28VDC 3A PWM 6V 12V 24V Speed controller for DC motor (PWM) 6V-28VDC 3A PWM 6V 12V 24V features: - Ideal to control the speed of DC motors - Input voltage: 6-28VDC - Max continuous output current: 3A - Max power: 100W - Dimensions: 50x17x28mm - PWM frequency: 21kHz - Adjustable duty cycle: 5% -100% - Keep in mind that the voltage applied to the motor will be the supply voltage applied to the circuit Code A0021 ✗ Out-of-Stock Price €5.89
Set of flat transmission belts - width 1.0mm A set of flat drive belts with a diameter from 27mm to 80mm. The kit includes approximately 50 pieces of strips from 0.5 mm to 1 mm thick. Technical data: - width: 1.0mm - diameter from 27mm to 80mm - thickness: from 0.5 to 1mm Quantity tolerance +/- 5% Code H0175 Available Price €3.90
2WD Round Robot Chassis Turtle Car 2x Wheels 3x Plates DIY for Arduino Contents: - 3x Round transparent chassis plate diameter of 14cm - 2x DC 5V gearbox motor - 2x 6.5cm wheels (Dia .) x 2.6cm (H) - 2x Encoder discs - 2x Idlers - 1x Battery holder 2xAA (batteries not included) - Screws for assembly Motor characteristic: - Voltage: 3 to 6Vdc - Reducer: 1:48 - No load speed: 100 RPM at 6Vdc - No load current: 90mA at 3Vdc - 180mA at 6Vdc Code R0007 Backorder Price €17.59
2WD Smart Robot Car Distance UNO Kit DIY - The ideal kit to build a robot car- Includes battery compartment for 6 AA batteries and ignition switch. (batteries not included) 2WD Smart Robot Car Distance UNO Kit DIY features: - Robot platform with 2 wheels and idler- UNO CH340 board compatible with Arduino- Prototype plate 170 points- Micro servo 9g- Platform for servo- Distance sensor HC-SR04- Sensor shield for sensors- L298N motor controller Motor 2WD Smart Robot Car Distance UNO Kit DIY features: - Voltage: 3 to 6Vdc- Speed without load: 100 RPM to 6Vdc- No-load current: 90mA to 3Vdc - 180mA to 6Vdc Code R0047 Backorder Regular price €30.32 -€1.84 Price €28.48
Tower Pro Micro Servo 9G SG90 pack 10pcs Pack 10pcs of micro servo 9g SG90. Code R0014 Available Price €24.95
Speed controller for DC motor (PWM) 10V-30VDC 3A 120W Ideal to control the speed of DC motors. Speed controller for DC motor (PWM) 10V-30VDC 3A 120W features: - Input voltage: 10-30VAC - Max output DC current: 3A (max 4A) - Max power: 120W (in case input voltage> 24V) - Dimensions: 74x47x28mm - PWM frequency: 500kHz - Duty Cycle adjustable: 5% -95% Please note that the voltage applied to the motor will be the supply voltage applied to the circuit Code A0087 Available Price €7.49
DC Circular Electromagnet 12V 20kgf 8W High quality clamping electromagnet. Its supply voltage is 12V. The lifting capacity of up to 20 kg. The temperature limit reaches 130 degrees centigrade. Retention electromagnets are most often used for electric / magnetic locking of doors, flaps, and others. Use metal plates with a thickness starting from 3mm, this will ensure maximum retention force on the locking element. It is important to remove heat from the housing. The maximum force decreases as the coil temperature increases. This electromagnet will meet the expectations of even the most demanding user. Code F0005 Available Price €16.89
Set of flat transmission belts - width 2.0mm A set of flat drive belts with a diameter from 27mm to 80mm. The kit includes approximately 50 pieces of strips from 0.5 mm to 1 mm thick. Technical data: - width: 2.0mm - diameter from 27mm to 80mm - thickness: from 0.5 to 1mm Quantity tolerance +/- 5% Code H0176 Available Price €3.90
2WD Robot Smart Car Chassis 2x Wheels DIY Ideal for building a car with obstacle detector, light followerIncludes battery compartment for 4 AA batteries and ignition switch. (batteries not included) 2WD Robot Smart Car Chassis 2x Wheels DIY features: - Voltage: 3 to 6Vdc- Speed without load: 100 RPM to 6Vdc- No-load current: 90mA to 3Vdc - 180mA to 6Vdc- Dimensions of the wheel: diameter 65mm - width 26 mm Code R0003 ✗ Out-of-Stock Price €11.50
Acrylic robot 4 DOF Arm without servo Robot arm set 4 DOF acrylic with screws and screwdriver for robotics projects.100% compatible with Arduino. Acrylic robot 4 DOF Arm without servo features: - Type: DIY kit robot arm 4 DOF- Degree: 4 degrees of freedom- Material: acrylic- For: 8 years and above- Weight: ~ 450 g- Does not include servos but it is imperative to have 4 micro servos sg90 to be able to mount it More informations: 1. 4 arm axes with more untrammeled and flexible experience.2. Most of the pieces are integrated in a perforated way at a time, which is very strong and easy to install.3. All movement joints are using high quality bearings with good precision. Code R0077 Available Price €20.99