Speed controller for AC motor 50-220VAC 2000W 10A Characteristic: - Voltage regulator 50-220V AC 2000W - Ideal to control the speed of AC motors - Allows adjustment the output voltage between 50V and 220V - Input voltage: 220V AC - Regulation range: 50V to 220V AC - Max current: 10A - Max power.: 2000W - Dimensions: 47 x 35 x 27mm Code A0020 Available Price €3.89
Small Thrust Actuator, Solenoid - 12VDC 10mm stroke This electromagnetic push actuator allows a force of 0.8N to be exerted and has a pitch length of 10mm. It is powered by 12VDC and has a consumption of 420mA. This supply is used in industrial automation systems. Characteristic: - Input voltage: 12VDC - Thrust length: 10mm - Holding force: 0.8N - Operating temperature: -5 ° C to 40 ° C without condensation - Humidity of operating environment: 45% to 85% non-condensing - Push bar diameter: 0.8 cm / 0.3 " - Material type: Metal - Model: ZYE1-0837Z - Actuator size: 3.7x2x2.5 cm / 1.5x0.8x1 " Code F0003 Available Price €7.95
Speed controller for DC motor (PWM) 6V-28VDC 3A PWM 6V 12V 24V Speed controller for DC motor (PWM) 6V-28VDC 3A PWM 6V 12V 24V features: - Ideal to control the speed of DC motors - Input voltage: 6-28VDC - Max continuous output current: 3A - Max power: 100W - Dimensions: 50x17x28mm - PWM frequency: 21kHz - Adjustable duty cycle: 5% -100% - Keep in mind that the voltage applied to the motor will be the supply voltage applied to the circuit Code A0021 ✗ Out-of-Stock Price €5.89
Small Thrust Actuator, Solenoid - 24VDC 10mm stroke This electromagnetic push actuator allows a force of 0.8N to be exerted and has a pitch length of 10mm. It is powered by 24VDC and has a consumption of 420mA. This supply is used in industrial automation systems. Characteristic: - Input voltage: 24VDC - Thrust length: 10mm - Holding force: 0.8N - Operating temperature: -5 ° C to 40 ° C without condensation - Humidity of operating environment: 45% to 85% non-condensing - Push bar diameter: 0.8 cm / 0.3 " - Material type: Metal - Model: ZYE1-0837Z - Actuator size: 2.6x2x6.35 cm / 1.02x0.79x2.5 " Code F0004 ✗ Out-of-Stock Price €7.95
Speed controller for DC motor (PWM) 10V-30VDC 3A 120W Ideal to control the speed of DC motors. Speed controller for DC motor (PWM) 10V-30VDC 3A 120W features: - Input voltage: 10-30VAC - Max output DC current: 3A (max 4A) - Max power: 120W (in case input voltage> 24V) - Dimensions: 74x47x28mm - PWM frequency: 500kHz - Duty Cycle adjustable: 5% -95% Please note that the voltage applied to the motor will be the supply voltage applied to the circuit Code A0087 Available Price €7.49
DC Circular Electromagnet 12V 20kgf 8W High quality clamping electromagnet. Its supply voltage is 12V. The lifting capacity of up to 20 kg. The temperature limit reaches 130 degrees centigrade. Retention electromagnets are most often used for electric / magnetic locking of doors, flaps, and others. Use metal plates with a thickness starting from 3mm, this will ensure maximum retention force on the locking element. It is important to remove heat from the housing. The maximum force decreases as the coil temperature increases. This electromagnet will meet the expectations of even the most demanding user. Code F0005 Available Price €16.89
Speed controller for DC motor (PWM) 10V-30VDC 120W 5A 10A Ideal to control the speed of DC motors. Characteristic: - Input voltage: 10-30VDC, - Max continuous output current: 5A (peak current 10A), - Max power: 120W, - Dimensions: 61x27.9x45.7mm, - PWM frequency: 16kHz, - Adjustable duty cycle: 5% -100%, - Integrates a regulator L7805CV TO- 220, - Incorporates a 10A fuse to protect the power circuit. Please note that the voltage applied to the motor will be the supply voltage applied to the circuit. Code A0088 ✗ Out-of-Stock Price €8.49
DC Circular Electromagnet 12V 2kgf 3W High quality clamping electromagnet. Its supply voltage is 12V. The lifting capacity of up to 2 kg. The temperature limit reaches 130 degrees centigrade. Retention electromagnets are most often used for electric / magnetic locking of doors, flaps, and others. Use metal plates with a thickness starting from 3mm, this will ensure maximum retention force on the locking element. It is important to remove heat from the housing. The maximum force decreases as the coil temperature increases. This electromagnet will meet the expectations of even the most demanding user. Code F0006 Available Price €8.49
Speed controller for DC motor (PWM) 12V-40VDC 0.01-400W 8A 10A Ideal to control the speed of DC motors. Characteristic: - Input voltage: 12-40VDC, - Max continuous output current: 8A (peak current 10A), - Control power: 0.01- 400W, - Dimensions: 60x75x28mm, - PWM frequency: 13kHz, - Static current: 0.02 A (Standby), - Adjustable duty cycle: 10% -100% , - It integrates a L7812CV TO-220 regulator, - It incorporates a 10A fuse to protect the power circuit. Note that the voltage applied to the motor will be the supply voltage applied to the circuit. Code A0089 Available Price €7.95
Electric Door Lock 12V DC Electromagnetic Solenoid Easy to install for the electric door lock or other automatic door lock systems with the mounting board. Code M0218 Last items in stock Regular price €9.95 -€1.00 Price €8.95
Speed controller for DC motor (PWM) 6V-30VDC 300W 10A 20A Ideal to control the speed of DC motors. Characteristic: - Input voltage: 12-40VDC, - Max continuous output current: 10A (peak current 20A), - Max power: 300W, - Dimensions: 60x28x50mm, - PWM frequency: 21kHz, - Static current: 0.02 A (Standby), - Adjustable duty cycle: 5% -100%, - Adjustable speed range: 0% -100%, - It incorporates a 20A fuse to protect the power circuit. Please note that the voltage applied to the motor will be the supply voltage applied to the circuit. Code A0090 Available Price €9.95