LED Display Screen Board Matrix 8x8 Common Cathode/Columns Common Anode Red Dots
  • LED Display Screen Board Matrix 8x8 Common Cathode/Columns Common Anode Red Dots

LED Display Screen Board Matrix 8x8 Common Cathode/Columns Common Anode Red Dots

P0125

LED Display Screen Board Matrix 8x8 Common Cathode/Columns Common Anode Red Dots features:
- Supply voltage of the LED points: 1.8-2.4 VDC
- LED color of the dots: red
- Pin numbers: 16
- Diameter of pins: 0.51mm
- Step between pins: 2.54mm
- Consumption current per segment: 30mA
- Maximum admissible current per segment: 120mA
- Power consumed per segment: 80mW
- Segment numbers (points): 64
- Diameter of a point: 3mm
- Operating temperature: -35 ° C - + 85 ° C
- Storage temperature: -35 ° C - + 85 ° C
- Screen with common cathode connection for the rows and common anode for the columns
- Screen size: 32x32x8 mm

OEM
5905323235830
Add to wish list

LED Display Screen Board Matrix 8x8 Common Cathode/Columns Common Anode Red Dots features:


- Supply voltage of the LED points: 1.8-2.4 VDC
- LED color of the dots: red
- Pin numbers: 16
- Diameter of pins: 0.51mm
- Step between pins: 2.54mm
- Consumption current per segment: 30mA
- Maximum admissible current per segment: 120mA
- Power consumed per segment: 80mW
- Segment numbers (points): 64
- Diameter of a point: 3mm
- Operating temperature: -35 ° C - + 85 ° C
- Storage temperature: -35 ° C - + 85 ° C
- Screen with common cathode connection for the rows and common anode for the columns
- Screen size: 32x32x8 mm
- This product is a matrix of 8x8 points of red LED of 3mm in diameter with excellent brightness and characteristics.
- Works with very low current consumption.
- The LEDs of the points in rows are connected with common cathode and the LEDs of the columns with common anode.
- This screen allows you to display a wider variety of characters such as special symbols, the entire alphabet, among others.

Data sheet

Número de digitos
Otro
Número de segmentos
8x8

Customers who bought this product also bought

Mini Submersible Water Pump DC 12V 200L/h 3W for ARDUINO

Mini Submersible Water Pump DC 5.5-12V 200L / H 3W
Mini Submersible Water Pump DC 12V 200L/h 3W ARDUINO features:

* Operating voltage: 5.5-12V * Max flow: max. 200 l / h * Maximum pumping height: 40cm- max. 150cm * Cable length: 140cm * Jack DC 5.5x2.1mm connector (ext / int) * Outlet diameter: 8 mm * Dimensions: 36mm x 25mm

M0111

Price €8.22

Switch On/On 6-pin 6A SPDT

This switch can be used for development projects and for the industry. All metal parts are not oxidized, the insulation material is of high quality.
Its pins protected by an anti oxidant makes welding much easier. Switch On/On 6-pin 6A SPDT features:
- Type: Latch SPDT
- Material: Plastic, metal
- Maximum operating current and voltage: 3A / 250V, 6A / 125V
- Number of pins: 6
- Pin size: 4.5x2 mm
- Type of current: AC
- Pins to be welded
- Switch action: 2 positions On/On
- Size: 13.2x12.7x33.3mm

K0152

Price €0.37

Battery LIPO 2800mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 2800mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 wires. -Voltage of the battery-3.7 V -Capacity of the battery- 2800 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Length / depth of the battery- 78 mm -Width / diameter of the battery- 100 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

PP042

Price €9.58

HC-SR04 Ultrasonic Sensor Distance Measuring Module

It is very easy to make it work with an Arduino, PIC or any other microcontroller.
In its output pin we will be able to measure the PWM pulse width depending on the distance of the obstacle.
HC-SR04 Ultrasonic Sensor Distance Measuring Module features:
- Supply voltage: 5V (4.5V- 6V)
- Consumption: 30 mA typical, (35 mA max)
- Interface: VCC , GND, Signal
- Range: 2 cm to 3 meters
- Angle 15º
- LED indicator of measurement in progress
- Frequency: 40 kHz for 200 µs - Size: 30mm x 20mm
- Quantity: 1 unit
Useful links for Arduino / Raspberry programming and projects with boards Arduino / Raspberry:
Automatic robot operation with obstacle detection />

S0007

Price €1.48

Motor Nema 17 4.28kg 17HS4401

It is one of the most popular stepper motors with 200 steps per turn and a maximum load of 4.28 kg/cm. It comes with a 1m cable. We have the best stepper motors at the best prices! 

I0020

Regular price €9.50 -€1.55 Price €7.95

RFID Module with Card and Pendant

It is compatible with almost any microcontroller, Arduino, PIC, AVR.
It can be used in Access Control projects and Alarm projects. RFID Module with Card and Pendant features:
- Supports Quick CRYPTO1 and MIFARE
- Operating current: 13-26mA at 3.3V
- Standby current: 10-13mA to 3.3V
- Sleep-mode current: <80μA
- Maximum current: 30mA
- Frequency of operation: 13.56Mhz
- Reading distance: 0 to 60mm
- Communication protocol: SPI
- Maximum SPI speed: 10Mbit / s
- Maximum data rate: 10Mbit / s
- Operating temperature: -20 to 80ºC
- Humidity of operation: 5% -95%

M0015

Price €2.31
€2.39
Save €1.00 €1.39

1,39 tax excl.

1
30+ items
Regular price €2.39 Price €1.39

Order until 4pm we will send today
30 days return