LED Display 4-Digit 7-Segment Red Common Anode
  • LED Display 4-Digit 7-Segment Red Common Anode

LED Display 4-Digit 7-Segment Red Common Anode

P0123

LED Display 4-Digit 7-Segment Red Common Anode features:
- Supply voltage of the segments: 3 VDC
- LED color of the segments: red
- Digit length: 14.2mm
- Digit width: 8.1mm
- Pin numbers: 12
- Diameter of pins: 0.51mm
- Step between pins: 2.54mm
- Consumption current per segment: 30mA
- Maximum admissible current per segment: 70mA
- Direct current by segment (pulse operation): 30mA
- Number of digits: 4
- Segment numbers by digit: 7
- Operating temperature: -25°C - + 85°C
- Storage temperature: -30°C - + 85°C
- Screen with common anode connection
- Screen size: 50.3x19x8 mm

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

LED Display 4-Digit 7-Segment Red Common Anode features:


- Supply voltage of the segments: 3 VDC
- LED color of the segments: red
- Digit length: 14.2mm
- Digit width: 8.1mm
- Pin numbers: 12
- Diameter of pins: 0.51mm
- Step between pins: 2.54mm
- Consumption current per segment: 30mA
- Maximum admissible current per segment: 70mA
- Direct current by segment (pulse operation): 30mA
- Number of digits: 4
- Segment numbers by digit: 7
- Operating temperature: -25°C - + 85°C
- Storage temperature: -30°C - + 85°C
- Screen with common anode connection
- Screen size: 50.3x19x8 mm

Data sheet

Número de digitos
4
Número de segmentos
7

Customers who bought this product also bought

LED Diode Assortment Kit 30 pcs 5mm red, green, yellow

LED Diode Assortment Kit 30 pcs 5mm red, green, yellow features:
- Lens color: red, green, yellow - diffuse
- Size: 5mm
- Operating current: 20mA
- Voltage (red) 1,8V-2,3V
- Voltage (green) 3,2V-3,4V
- Voltage (yellow) 1,8V-2,3V
- Anode (A): Positive (long leg): 28mm
- Catode (K): Negative (short leg): 25mm
- Operating temperature: -25ºC/80ºC
- Welding temperature: +260ºC
- Quantity: 30 units
*10x red
*10x green
*10x yellow

P0011

Price €0.05

Adjustable DC Module LM2596 1,25-32V 3A Step Down

3A DC Converter 1,25-32V Adjustable LM2596 Step Down Module features:

- Based on the LM2596S-ADJ regulator
- Rectification: Asynchronous
- Output Voltage: 1.25v - 32v DC (adjustable)
- Voltage of Input: 3.2v - 35v DC
- Max Output Current: 3A (with heat sink)
- Ripple at output voltage: 30mV
- Frequency: 150KHz
- Max Conversion Efficiency: 92%
- Load Regulation: ± 0.5%
- Voltage Regulation: ± 2.5%
- Operating Temperature: -40ºC to + 85ºC
- Measurements 43x 21x 14 mm

A0004

Price €1.64

5x Push Switch Button B3F Omron Red Key 12mm

5x Push Switch Button B3F Omron Red Key 12mm features:

- 5x Push Buttons B3F Omron Key
- Maximum current: 50 mA
- Tension DC: 24V
- Operating force: 1.27N
- Switch terminals: weldable
- Contact: SPST-NO
- Contact resistance: 100M Ohm
- Type of action: Superficial
- Measures: 12x12x7.3mm

K0073

Price €0.16

Flat Cable 1m AWG28 1.27 Gray 10 Pins

Flat Cable 1m AWG28 1.27 Gray 10 Pins features:
- Length: 100cm
- Model AWG28
- Product name: Flat cable
- Number of conductors: 10
- Conductive material: Copper
- Insulation voltage: 300V
- Inner diameter 0.32mm
- Pin Pitch: 1.27mm
- Temperature: 105 ° C

K0002

Price €2.03

Small Probe Test for Multimeter Red Color

Small Probe Test for Multimeter Red Color features:
- 100% new and high quality
- Material: brass and plastic
- Powerful spring pulling the min hooks to grasp the small components firmly and avoid any short circuit
- Hands free to repair, you can connect the clips to multi-meter or DC POWER by a track
- It will help you to test IC or repair the cell phone and other mini electronic products more conveniently
- Length: 4.3 cm / 1.69 "
- Size of the brass hook: approximately 0.9mm x 0.4mm
- Red color

H0123

Price €0.66

HC-SR505 Mini Module Motion Detector Infrared PIR Sensor

Arduino compatible IR motion detector with a detection range of 3 meters.
One sensor electric pyro, which can detect infrared radiation levels - detect a change in the average IR levels of your detection zone.
Ideal for projects with ARDUINO, PIC, AVR, STM32.
Characteristic:
- Operating voltage: 4.5V- 20V
- Consumption in idle state:

S0037

Price €2.23
€2.06

2,06 tax excl.

1
30+ items
Price €2.06

Order until 4pm we will send today
30 days return