JST Male Connector 15cm AWG18
  • JST Male Connector 15cm AWG18

JST Male Connector 15cm AWG18

K0153

This connector can be used in most modeling projects.
It is ideal for small Lipo and NiMH connection. JST Male Connector 15cm AWG18 features:
- Type: JST male connector for RC BEC Lipo
- Color:
- Black: low power polarity
- Red: high power polarity
- Length: 20cm

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

JST Male Connector 15cm AWG18 description

This connector can be used in most modeling projects.
It is ideal for small Lipo and NiMH connection. p >

JST Male Connector 15cm AWG18 features:

- Type: JST male connector for RC BEC Lipo
- Color:
- Black: low power polarity
- Red: high power polarity
- Length: 20cm

Data sheet

Longitud de cable
15cm
Conector
JST macho

Customers who bought this product also bought

LED Matrix 16x8 red MAX7219 Waveshare for Raspberry Pi

Voltage sensor module 0.02445V ~ 25V directly connectable with any version of Raspberry Pi.
LED Matrix 16x8 red MAX7219 Waveshare for Raspberry Pi features:

- Manufacturer: Waveshare
- LED Array: 16x8
- LED Driver: MAX7219
- Voltage operating: 5V
- SPI communication
- Output connector: supports any revision of Raspberry Pi (directly connectable)
- Dimensions: 6.43 × 3.50 × 2.65cm.

RA034

Regular price €7.43 -€1.00 Price €6.43

Module L298P DC 2A Motor Management Shield Bluetooth Interface PWM

This module, which uses the exclusive L298P chip for driving high-power motors, can directly control two DC motors, with a drive current up to 2A. The motor output uses eight-speed Schottky diodes as protection.
The design of the letter allows you to connect directly to the Arduino UNO R3 for easier use. Module L298P DC 2A Motor Management Shield Bluetooth Interface PWM features:
- 1 logical step of the input voltage VD: 5 VDC
- Control of the input voltage VS and control by pulse width modulation:
      - VIN input: 6 - 12 VDC
      - PWRIN input: 4.8 - 35 VDC
- Logic current flow: Iss <36m A
- Operation current management: Io <2 A
- Maximum power dissipation 25W (T = 75 ° C)
- Input of the control signal:

M0136

Regular price €9.50 -€1.51 Price €7.99

Led Matrix 8x8 MAX7219 Soldier

Led Matrix 8x8 MAX7219 Soldier features:
- MAX7219 controller module with 8x8 led matrix + cables
- 8X8 LED matrix controlled by MAX7219 chip
- Led 3mm red color
- SPI communication
- Voltage: 4.7 - 5.3V DC
- Interfaces to manage multiple modules in cascade
- Matrix dimensions: 32mm x 32mm x 8mm
- PCB dimensions: 32mm x 50mm

M0043

Price €2.44

LCD Display Screen 12864 128x64 Dots Graphic Blue Backlight

Ideal for projects with ARDUINO.
You can use it with PIC, AVR, STM32. LCD Display Screen 12864 128x64 Dots Graphic Blue Backlight features:
- Graphic LCD Screen 128x64 points
- 5V power
- Blue retro background illuminated, white letters
- Controller ST7920
- Parallel / serial communication
- Dimensions PCB 93x70mm

P0015

Price €8.22

Rechargeable Battery Samsung ICR18650 2600mAh Li-ion

Characteristic: - Lithium Battery WITHOUT Protection
- Nominal capacity: 2600mAh (discharge of 0.2C, 2.75V)
- Minimum capacity: 2550mAh (0.2C, 2.75V discharge)
- Charging voltage: 4.2 ± 0.05 V
- Nominal voltage: 3.63V
- Charging method: DC-CV (constant voltage with current limited)
- Charging current: standard charge: 1300mA, fast charge: 2600mA
- Charging time: standard charge: 3 hours, fast charge: 2.5 hours
- Max. Charging current: 2600mA (ambient temperature 25 °)
- Max. Discharge current: 5200mA (ambient temperature 25 °)
- Discharge cut-off voltage: 2.75V
- Cell weight: 47.0g maximum
- Cell dimension: Height: 65.00 mm max., Diameter: 18.40 mm max.

PP018

Price €4.95

Shield Sensor Expansion Board Arduino compatible V2.0

Arduino Shield Sensor Expansion Board V2.0 features:
The Mega Sensor Shield V2.0 allows: - To be directly punched to an Arduino Uno, Mega, Leonardo board
- Facilitate the connection of different modules, such as sensors, relays, servos, buttons, potentiometers and more
- Size: 100x54x12 mm

M0129

Regular price €3.21 -€0.90 Price €2.31

LCD Display Screen 12864ZW 128x64 Dots Graphic Blue Backlight

Ideal for projects with ARDUINO
You can use it with PIC, AVR, STM32
LCD Display Screen 12864ZW 128x64 Dots Graphic Blue Backlight features:
- Graphic LCD Screen 128x64 points
- 5V power
- Blue retro background illuminated, white letters
- Controller ST7920
- Parallel / serial communication
- Dimensions PCB 93x70mm

P0140

Price €6.88
€0.90

0,90 tax excl.

1
30+ items
Price €0.90

Order until 4pm we will send today
30 days return