16x2 1602 LCD display Blue IIC/I2C

It consists of a display of 16 characters and 4 rows.
Ideal for projects with Arduino.
You can use it with PIC, AVR, STM32. LCD Display Screen Blue Backlight 16x4 1604 features:
- LCD screen, 16 characters and 4 lines
- 5V power
- Backlit blue background, white letters
- Include an adjustable contrast pin

The display is compatible with the PCD8544 controller.
Ideal for projects with ARDUINO.
You can use it with PIC, AVR, STM32 . Characteristic: - LCD screen, 48x84 pixels
- Vcc supply 2.7-3.3V
- Voltage LED backlight 2.7-3.2V
- Compatible PCD8544 controller
- SPI interface
- PCB dimensions (mm): 45x45
- Includes solder pins
- The screen may have small stripes

This little PCB piece is a great independent display addition to any project. Why independent? Well, it features an ATmega328P AVR on its back, making it a pretty much an UNO with a screen rather than a screen itself.

We have the same screen with a reverse color version, i.e. RGB on black with a reference of SP028

It consists of a display of 16 characters and 4 rows.
Ideal for projects with Arduino.
You can use it with PIC, AVR, STM32. LCD 1604 Display Screen Blue Backlight 16x4 characters features:
- LCD screen, 16 characters and 4 lines
- 5V power
- Backlit green background, white letters
- Include an adjustable contrast pin

This little PCB piece is a great independent display addition to any project. Why independent? Well, it features an ATmega328P AVR on its back, making it a pretty much an UNO with a screen rather than a screen itself.

We have the same screen with a reverse color version, i.e. black on RGB with a reference of SP028

It is made up of a 16-character, 2-row, 6-button display.
The display is compatible with the HD44780 controller and is connected in 4-bit mode so it can be used directly through the Arduino LiquidCrystal library.
Ideal to navigate through the different parts of the configuration or map. Keyboard Shield 16x2 LCD screen for Arduino features:
>
- 2x16 LCD with blue backlight and white characters
- Potentiometer to modify the LCD contrast
- 5-push-button keyboard + RESET
- Use of the minimum possible channels
- Full compatibility with Arduino UNO and Mega
- The display is compatible with the HD44780 controller
- Response time: 30 ms
- Size: 80 x 60 x 22 mm

It consists of a 16-character, 2-row display.
The display is compatible with the HD44780 controller.
Ideal for projects with ARDUINO.
You can use it with PIC, AVR, STM32. Characteristic: - LCD screen, 16 characters and 2 lines - 5V power supply
- HD44780 compatible controller
- Backlit blue background, black letters
- Include an adjustable contrast pin
- Dimensions (mm): 80 x 36 x 12

It is the freshest serial LCD from SparkFun. Similarly to other SparkFun LCD screens it is put on single board with a microcontroller, however in contrast to the other screens in our offer (SP027 and SP028) it is based on PIC16F88 rather than ATmega328.

Housing for 16x2 character LCD screens.
The screen is fixed to the housing with 4 screws.
1602 LCD display case features:

- Transparent acrylic shell,
- Includes screws,
- Dimensions: 90x40x55mm.

- It consists of a 20-character, 4-row display
- The display is compatible with the controller HD44780 and integrates the module so you can use it through the I2C protocol without any problem
- Only two pins are needed for communication, SDA and SCL
- Ideal for projects with ARDUINO and Raspberry Pi platforms - You can use it with PIC, AVR, STM32
PCF8574 - & gt; the default address 0x20
PCF8574A - & gt; the default address 0x3F
- It can be changed to any between 0x20 and 0x27 depending on whether or not you have soldered pins A0 A1 A2
20x4 2004 LCD display PCF8574T I2C Backlit Blue features:

- LCD screen, 20 characters and 4 lines
- 5V power supply
- HD44780 compatible controller