Servos Tester

Servo Extension Lead Wire Cable 300mm JR Futaba features:
- Cable length: 300mm

Micro Servo Compatible with MG90S features:
- Operating voltage: 4.8Vdc (5V) or 6Vdc
- Torque: 1.80 kg / cm at 4.8V and 2.20kg / cm at 6V
- Speed: 0.1seconds / 60º at 4.8V and 0.8 seconds / 60º at 6V
- Gear type: metallic
- Turning width: 180º
- Temperature working: from -30 to 60 ºC
- 3 plastic propellers / arms
- Fixing screws
- Size: 22.6 x 11.8 x 31 mm
- Weight: 13.4 gr

This right symmetry micro digital servo is of excellent quality and very light weight.
Its high speed and rotational capacity is great advantage to develop sensitive projects with quick response. Characteristic: - Symmetry of the servo: for incorporation to the right
- Plug: 1- red wire: positive polarity (+)
2- black wire: negative polarity (-)
3- white wire: control signal
- Model: GS-1502 - Type: Analog Servo
- Rotation angle: 180 °
- Torque:
- 0.20kg / cm if Vin = 4.8V
- 0.24kg / cm if Vin = 6V
- Speed:
- 0.11sec if Vin = 4.8V
- 0.09sec if Vin = 6V
- Operating voltage: 3.7V-5V - Material type: Nylon
- PCB size: 21x15x12 mm

Servo Arm 25T Aluminium for Futaba MG996 MG995 Hitec JR features:
- 25T Servo Arm for Futaba, Tower Pro and High Power Servos
- Material: Aluminum
- Color: red
- Size: 35.5 x 15 x 6mm
- Weight: 4 grams
- M3 thread for joints of cars or helicopters.
- Hole distance 20 and 24 mm from the servo outlet.
- Quantity: 1 unit

This module can handle 16 PWM signals, through an I2C connection with devices like microcontrollers or development boards like Arduinos.
It can also be concatenated with other equal modules (up to 62 cards), increasing versatility and allowing you to obtain up to 992 PWM outputs that can be used to connect servo motors or LEDs to change the brightness intensity.
PCA9685 digital servo motor controller 16 channel PWM features:

- Supply voltage: 3-5 VDC,
- Maximum motor voltage: 6 VDC,
- Number of channels: 16,
- Resolution per channel: 12 bits,
- Interface: I2C,
- Working frequencies: 40-1000 Hz,
- PCB size: 62.3x25.3mm .

Servo Motor Type S3003 Aeromodelling features:
- Operating voltage: 4.8 V to 6 V
- Max torque: 4.1kg / cm (6V) - Operating speed: 0.23sec / 60 degree (4.8V), 0.19sec / 60 degree (6V)
- Max radius: 180 ° (90º in each direction)
- Temperature range: - 20 + 60 C degrees
- Weight: 38 g
- Cable length: 26cm
- Dimensions: 40.5 x39x 20 mm
- Servo connector: JR - Chinese Manufacture

LSC-16 Digital Servo Motor Controller 16 channels features:
- With current limiting protection. The servo output is isolated from the CPU to prevent increased servo current causing damage to the CPU.
- CPU using high performance STM32 single chip microcomputer with ARM Cortex-M3 corer, control High precision 16-channel servo movement, adjustable speed.
- 16M high capacity memory, enough for your use! It can contain 230 action groups! Each action group can hold up to 510 actions!
- Supports online debugging, no need to install any driver by yourself (Install Drivers Automatically).
- 0 ~ 3rd and 12th - 15th servo interface have over current protection! Greatly reducing the risk of burned servo due to locked rotor.

The micro:bit servo driver module, 16 channel, 12 bit, I2C interface. Have you ever had the problem of not having enough micro:bit PWM outputs when trying to create a robotic arm or other robot that requires multiple servos? At times like this a great solution comes to your aid. This servo controller will be the perfect choice.

Servo Extension Lead Wire Cable 50cm JR Futaba features:
- Cable length: 50cm

A sliding ring capable of holding up to 12 wires of 12mm diameter.