Universal LCD Digital Multimeter 4 ½ digits UNI-T UT52 Black Modern digital multimeter with large 4 digits LCD display that provides a better user experience. Voltage / current / resistance / capacitance / frecunecy analysis, as well as diode, transistor and continuity tests. Max. display 19999 4 ½ digits This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0207 ✗ Out-of-Stock Price €59.00
Continous Rotation 360 Degree Servo S3003 Continous Rotation 360 Degree Servo S3003 features: - Operating voltage: 4.8 V to 6 V- Torque max.: 4.1kg / cm (6V)- Operating speed: 0.23sec / 60degree (4.8V), 0.19sec / 60degree (6V)- Radio max.: 360º- Temperature range: -20º + 60ºC degrees- Weight: 38 g- Cable length: 26cm- Dimensions: 40.5 x39x 20 mm- Servo connector: JR- Chinese manufacture Code R0019 Available Regular price €7.95 -€0.96 Price €6.99
Embellisher Button Red White Yellow Orange Potentiometer Knob for Arduino Embellisher features:- Color black and red, white, yellow, orange- Upper diameter: 0.9 cm- Lower diameter: 1.5 cm- Height: 1.6 cm- Inside hole diameter: 0.6 cm Code K0061 Available Price €0.69
Heartbeat sensor for Arduino This detection module combines a phototransistor and an LED that, when placed on a finger or ear lobe, provides a reading.By reading this signal you can interpret a change in the signal as a heartbeat.Keep in mind that this is a sensitive module and you will experience the noise from home lights and other sources, since minimizing the lighting of the unit will help get the readings. Heartbeat sensor Arduino features: - Connection pins:- S: Analog output- (+): Power supply 3-5 VDC,- (-): GND.- Length: 18mm,- Width: 18mm,- Height: 4mm,- Operating temperature: -40ºC to + 85ºC. Code S0136 Available Regular price €9.49 -€1.50 Price €7.99
DHT11 Temperature and Humidity Sensor The humidity sensor DHT11 comes in a plastic body ideal for mounting on a panel or similar. It uses a capacitive sensor that returns a digital signal with the measurement. DHT11 Temperature and Humidity Sensor features: - Operating voltage: 3 to 5 VDC- Humidity measurement range: 20-95% ± 5% accuracy- Temperature measurement range: 0ºC to 50ºC ± 2º accuracy- Maximum sampling rate: 2 seconds- Working current 2.5mA- Iterfaz 1-wire- Dimensions: 2.3 x1.2x 0.5cm- Quantity: 1 unit Code S0010 Available Price €2.49
Resistor 4,7K Ohm 5% 0,25W 1/4W Resistor 4,7K Ohm 5% 0,25W 1/4W features:- 4.7K Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0017 Available Price €0.08
Soldering PCB Holder 200x140mm Adjustable 360 Degrees Soldering PCB Holder 200x140mm Adjustable 360 Degrees features: - Support for welding, repair- Adjustable support 360 degrees- Tool for mobile repair- Circuit Board Repair Moviles- High quality- Weight: 0.7kg- Dimensions: Approx. 300x165x125mm Code H0050 Last items in stock Price €12.95
Blue cleaning sponge for soldering iron tip with pre-cut circle at the center Blue sponge to clean the tip of your soldering iron to the tin. Blue cleaning sponge for soldering iron tip with pre-cut circle at the center features: - Circle diameter 17mm precut to the center of the sponge,- Size: 55x55mm,- Material: sponge,- Color: blue,- Quantity: 1. Code H0151 Available Price €0.80
Solder Wire Tin Sn60Pb40 Lead 2.5% Flux 0.25mm 100g Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 0.25mm features: - 100gr. 0.25mm diameter welding wire. 60% tin and 40% lead- Fusing temperature 183 „ƒ / 190 „ƒ- Alloy Sn60 Pb40- Flux 2.5%- Quantity: 1 unit Code Q0107 Last items in stock Price €16.49
60/40 Tin Lead Solder Wire Soldering Flux Sn60/Pb40 2.5% 1mm 50g 60/40 Tin Lead Solder Wire Soldering Flux Sn60/Pb40 2.5% 1mm 50g features:- 50gr. 1mm diameter welding wire. 60% tin and 40% lead.- Fusing temperature 183°C/190°C.- Alloy: Sn60 Pb40- Flux 2.5%- Quantity: 1 unit Code Q0001 ✗ Out-of-Stock Price €3.95
Tin Roll 99.3/0.7 Sn/Cu 3% Flux 10g 1mm Tin ideal for application in consumer electronics circuitsTin Roll 99.3/0.7 Sn/Cu 3% Flux 10g 1mm features:- 10 gr. welding wire of 1 mm diameter. 99,3% tin, 0,5-0,9% copper and 0,07% lead- Melting temperature 227 C- Alloy Sn99Cu1- Flux 3% Roma IPC-J-STD-004B, SW32 DIN8511 - RohS2 compliant - Quantity: 1 unit- High quality - manufactured in EU Code Q0102 Backorder Price €1.30
Solder Wire Tin Sn60Pb40 Lead 2.5% Flux 0.38mm 100g Tin ideal for application in consumer electronics circuits. Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 0.38mm. Code Q0141 Available Price €14.49
Welding Wire 1kg Tin 60/40 Sn/Pb Lead 2.5% Flux 0.5mm Tin ideal for application in consumer electronics circuits. Welding Wire 1kg Tin 60/40 Sn/Pb Lead 2.5% Flux 0.5mm. 60% tin and 40% lead. Melting temperature 183 o C / 190 o C. Flux 2.5%Manufactured in EU. Code Q0142 Backorder Price €65.90
Solder Wire Tin Sn60Pb40 Lead 2.5% Flux 0.9mm 250g Tin ideal for application in consumer electronics circuits. Welding Wire 250g Tin 60/40 Sn/Pb Lead 2.5% Flux 0.9mm. Code Q0140 ✗ Out-of-Stock Price €19.95
Tin Roll 60/40 Sn/Pb 2.5% Flux 10g 1mm Tin ideal for application in consumer electronics circuitsTin Roll 60/40 Sn/Pb 2.5% Flux 10g 1mm features:- 10 gr. welding wire of 1 mm diameter. 60% tin, 40% lead- Melting temperature 187/190 C- Alloy Sn60Pb40- Flux 2.5% SW26 1.1.2B ISO9454 - It is leaded alloy for manual and automatic processes where meeting the requirements of the RoHS2 Directive is not required. - Quantity: 1 unit- High quality - manufactured in EU Code Q0004 Available Price €1.49
Welding Wire 1kg Tin 60/40 Sn/Pb Lead 2.5% Flux 1.0mm Tin ideal for application in consumer electronics circuits. Welding Wire 1kg Tin 60/40 Sn/Pb Lead 2.5% Flux 1.0mm. 60% tin and 40% lead. Melting temperature 183 o C / 190 o C. Flux 2.5%Manufactured in EU Code Q0144 Last items in stock Price €65.90
Tin Coil Sn60Pb40 Flux Wire 0.3mm 3g The ideal tin for application in consumer electronics circuits, especially mobile phones and tablets. 3g of 0.3mm diameter tin wire. Consists of 60% tin, 40% lead. Code Q0121 Available Price €1.49
Desoldering Wire 1mm 1.0 High grade in the absorption of tin for professionals.Copper mesh roll for desoldering electronic components.Desoldering Wire 1mm 1.0 features:- Material: Copper- Length: 1.5m- Width: 1.0mm- Desoldering Braid Solder Remover Wick 1mm / 1.5m- Pure copper braid construction- Quick removal welding- Excellent thermal for a faster and safer desoldering Code H0003 Available Price €1.79
Solder Wire Tin Sn60Pb40 Lead 2.5% Flux 0.25mm 100g Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 0.25mm features: - 100gr. 0.25mm diameter welding wire. 60% tin and 40% lead- Fusing temperature 183 „ƒ / 190 „ƒ- Alloy Sn60 Pb40- Flux 2.5%- Quantity: 1 unit Code Q0107 Last items in stock Price €16.49
60/40 Tin Lead Solder Wire Soldering Flux Sn60/Pb40 2.5% 1mm 50g 60/40 Tin Lead Solder Wire Soldering Flux Sn60/Pb40 2.5% 1mm 50g features:- 50gr. 1mm diameter welding wire. 60% tin and 40% lead.- Fusing temperature 183°C/190°C.- Alloy: Sn60 Pb40- Flux 2.5%- Quantity: 1 unit Code Q0001 ✗ Out-of-Stock Price €3.95
Tin Roll 99.3/0.7 Sn/Cu 3% Flux 10g 1mm Tin ideal for application in consumer electronics circuitsTin Roll 99.3/0.7 Sn/Cu 3% Flux 10g 1mm features:- 10 gr. welding wire of 1 mm diameter. 99,3% tin, 0,5-0,9% copper and 0,07% lead- Melting temperature 227 C- Alloy Sn99Cu1- Flux 3% Roma IPC-J-STD-004B, SW32 DIN8511 - RohS2 compliant - Quantity: 1 unit- High quality - manufactured in EU Code Q0102 Backorder Price €1.30
Solder Wire Tin Sn60Pb40 Lead 2.5% Flux 0.38mm 100g Tin ideal for application in consumer electronics circuits. Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 0.38mm. Code Q0141 Available Price €14.49
Welding Wire 1kg Tin 60/40 Sn/Pb Lead 2.5% Flux 0.5mm Tin ideal for application in consumer electronics circuits. Welding Wire 1kg Tin 60/40 Sn/Pb Lead 2.5% Flux 0.5mm. 60% tin and 40% lead. Melting temperature 183 o C / 190 o C. Flux 2.5%Manufactured in EU. Code Q0142 Backorder Price €65.90
Solder Wire Tin Sn60Pb40 Lead 2.5% Flux 0.9mm 250g Tin ideal for application in consumer electronics circuits. Welding Wire 250g Tin 60/40 Sn/Pb Lead 2.5% Flux 0.9mm. Code Q0140 ✗ Out-of-Stock Price €19.95
Tin Roll 60/40 Sn/Pb 2.5% Flux 10g 1mm Tin ideal for application in consumer electronics circuitsTin Roll 60/40 Sn/Pb 2.5% Flux 10g 1mm features:- 10 gr. welding wire of 1 mm diameter. 60% tin, 40% lead- Melting temperature 187/190 C- Alloy Sn60Pb40- Flux 2.5% SW26 1.1.2B ISO9454 - It is leaded alloy for manual and automatic processes where meeting the requirements of the RoHS2 Directive is not required. - Quantity: 1 unit- High quality - manufactured in EU Code Q0004 Available Price €1.49
Welding Wire 1kg Tin 60/40 Sn/Pb Lead 2.5% Flux 1.0mm Tin ideal for application in consumer electronics circuits. Welding Wire 1kg Tin 60/40 Sn/Pb Lead 2.5% Flux 1.0mm. 60% tin and 40% lead. Melting temperature 183 o C / 190 o C. Flux 2.5%Manufactured in EU Code Q0144 Last items in stock Price €65.90
Tin Coil Sn60Pb40 Flux Wire 0.3mm 3g The ideal tin for application in consumer electronics circuits, especially mobile phones and tablets. 3g of 0.3mm diameter tin wire. Consists of 60% tin, 40% lead. Code Q0121 Available Price €1.49
Desoldering Wire 1mm 1.0 High grade in the absorption of tin for professionals.Copper mesh roll for desoldering electronic components.Desoldering Wire 1mm 1.0 features:- Material: Copper- Length: 1.5m- Width: 1.0mm- Desoldering Braid Solder Remover Wick 1mm / 1.5m- Pure copper braid construction- Quick removal welding- Excellent thermal for a faster and safer desoldering Code H0003 Available Price €1.79