Printed circuits

Integrated Circuit Supports DIP24 Width 17.78 mm features:
- Type: DIP DIL
- Total number of pins: 24
- Step between pins: 2.54 mm
- Material: Polybutylene terephthalate
- Length: 27.94 mm
- Width: 17.78 mm
- Temperature min .: -25 °C
- Max temperature: +85 °C
- RoHS compliant

Industrial Abrasive Scourer Pad 150x50mm Laminated Copper Plate PCB features:
Industrial abrasive scourer for laminated copper plate Cleaner for cleaning the laminated copper plate. Perfectly removes impurities such as oxides, sulfides and other similar establishments, as well as polished surfaces so that the copper substrate is better prepared.
It is also ideal for removing the remains of enamels, lacquers and other materials used during the creation of PCB tracks.

SOP8 to DIP8 Converter 150mil Connector features:
  - SOIC universal, converter SOP8 to DIP 8 adapter 150mil IC
- High quality and durable
- Easy to use
- Suitable for all Series-11, ALL-100GANG, LT-48 series, SuperPRO series, top series, etc.
- Compatible with support chips: 24CXX, 93CXX and all SOP8 narrow chips
- Compatible with the programmers (SOP8 step 1.27) and all the SOP8 chips
- Size: 2x1.8x1.7 cm / 0.79x0.71x0.67 "

Chemical substance for recording printed circuits and copper. Unlike ferric chloride, sodium persulfate is colorless, odorless, does not stain clothes and does not turn blue when it runs out. Easy to dissolve. It acts very regular with guarantee of contour sharpness. 

Integrated Circuit Supports DIP32 Width 17.78mm features:
- Type: DIP DIL
- Total number of pins: 32
- Step between pins: 2.54 mm
- Material: Polybutylene terephthalate
- Length: 38.10 mm
- Width: 17.78 mm
- Temperature min .: -25 °C
- Max temperature: +85 °C
- RoHS compliant

Sodium Persulfate B327 (PCB) Printed Circuit Board Etching 1kg features:
A compound for etching of printed circuit boards and pickling of copper. An ideal alternative to ferric chloride. It is readily soluble and does not crystallize from the solution. It etches evenly, ensures the sharpness of contours and minimizes undercutting. Usage: Dissolve the preparation in 0.5 l of water at a temperature of 50°C. Perform etching at 40°C (max. 50°C). Bath movement ensures quicker etching. The etching solution must not be stored in hermetically sealed containers due to the risk of developing overpressure and cracks.

Integrated Circuit Supports DIP40 Width 17.78mm features:
- Type: DIP DIL
- Total number of pins: 40
- Step between pins: 2.54 mm
- Material: Polybutylene terephthalate
- Length: 48.26 mm
- Width: 17.78 mm
- Temperature min .: -25 °C
- Max temperature: +85 °C
- RoHS compliant

The product provides a good development quality, protecting the sharpness of the color. The formulation is free of NaOH, which significantly increases safety at work.
Universal developer for photo varnish and positive printed circuit boards PCB.

Integrated Circuit Supports DIP8 Width 10.16 mm features:
- Type: DIP DIL
- Total number of pins: 8
- Step between pins: 2.54 mm
- Material: Polybutylene terephthalate
- Length: 7.62 mm
- Width: 10.16 mm
- Temperature min .: -25 °C
- Max temperature: +85 °C
- RoHS compliant

Integrated Circuit Supports DIP16 Width 10.16 mm features:
- Type: DIP DIL
- Total number of pins: 16
- Step between pins: 2.54 mm
- Material: Polybutylene terephthalate
- Length: 17.78 mm
- Width: 10.16 mm
- Temperature min .: -25 °C
- Max temperature: +85 °C
- RoHS compliant

Integrated Circuit Supports DIP18 Width 10.16mm features:
- Type: DIP DIL
- Total number of pins: 18
- Step between pins: 2.54 mm
- Material: Polybutylene terephthalate
- Length: 20.32 mm
- Width: 10.16 mm
- Temperature min .: -25 °C
- Max temperature: +85 °C
- RoHS compliant

Integrated Circuit Supports DIP20 Width 10.16 mm features:
- Type: DIP DIL
- Total number of pins: 20
- Step between pins: 2.54 mm
- Material: Polybutylene terephthalate
- Length: 22.86 mm
- Width: 10.16 mm
- Temperature min .: -25 °C
- Max temperature: +85 °C
- RoHS compliant

Developer tray for Fotoboard Pre-Sensitized PCB 14x22cm features:
- 

Integrated Circuit Supports DIP28 Width 10.16 mm features:
- Type: DIP DIL
- Total number of pins: 28
- Step between pins: 2.54 mm
- Material: Polybutylene terephthalate
- Length: 33.02 mm
- Width: 10.16 mm
- Min temperature: -25 °C
- Max temperature: +85 °C
- Compliant with the RoHS standard

Developer tray for Fotoboard Pre-Sensitized PCB 22x31cm features:
- 

PCB Circuit Board Marker Pen 1.0mm for printed circuits features:
-Permanent resistance ink to acid attack
-Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.
-Does not leave stains of ink, resistant to sunlight
-Quantity: 1.00mm - 1 unit

PCB Circuit Board Marker Pen 0.4mm for printed circuits features:
- Permanent resistance ink to acid attack
- Resistant to sunlight
- Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.
- Quantity: 0.4mm- 1 unit

Integrated Circuit Supports DIP14 Width 10.16 mm features:
- Type: DIP DIL
- Total number of pins: 14
- Step between pins: 2.54 mm
- Material: Polybutylene terephthalate
- Length: 17.78 mm
- Width: 10.16 mm
- Temperature min .: -25 °C
- Max temperature: +85 °C
- RoHS compliant

PCB Circuit Board Marker Pen 0.6 for printed circuits features:
- Permanent resistance ink to acid attack
- Resistant to sunlight
- Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.
- Quantity: 0.6mm -1 unit

3x PCB Circuit Broad Marker Pen for printed circuits features:
-Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.
-Resistant to sunlight
-Permanent resistance ink to acid attack
-Quantity: 3 units
S 0.4mm - 1 unit
M 0.6mm- 1 unit
L 1.0mm - 1 unit