LED Diode Assortment Kit 40x Red Green Yellow Blue LED Diode Assortment Kit 40x Red Green Yellow Blue features: - Lens color: Red, green, yellow, blue -difused- Size: 5 mm- Operating current: 20mA- Voltage (red) 1.8V-2.3V- Voltage (green) 3.2V-3.4V- Voltage (yellow) 1.8V-2.3V- Voltage (blue) 3.2V-3.4V- Anode (A): Positive (long leg): 28mm- Cathode (K): Negative (shorter leg): 25 mm- Operating temperature: -25ºC/80ºC- Welding temperature: + 260ºC- Quantity: 40 units - 10x red - 10x green - 10x yellow - 10x blue Code P0012 Available Price €0.06
Car Robot Tire Wheel Smart Car Car Robot Tire Wheel Smart Car features:- Dimensions of the wheel: - Diameter: 65mm - Width: 26 mm- Quantity: 1 unit Code R0009 Available Regular price €1.90 -€0.41 Price €1.49
Mini voltmeter with LED display 7 blue segments 3 digits 3.5-30 VDC - 1% Mini voltmeter with LED display 7 red 3-digit segments.Simply connect the positive and the negative to turn it on and measure the voltage. Mini voltmeter with LED display 7 blue segments 3 digits 3.5-30 VDC - 1% features: - Operating voltages (measurement): 3.5 - 30 VDC,- Color of the LED segments: blue- Update speed: approx. 500ms,- Accuracy of the measurement: ± 1%,- No need power supply: it is powered with the measured voltage,- Cable length included: 10cm,- Size: 30x12x9mm. Code M0201 Available Regular price €2.50 -€0.50 Price €2.00
LED diode 1W White SMD 130LM Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 3.0-3.2V - Current: 300mA - Luminous flux: 120-130LM - Beam angle: 130 degrees Code P0043 ✗ Out-of-Stock Price €0.98
Double-Sided Adhesive Tape 5mm 50m Double-Sided Adhesive Tape 5mm 50m features: - Transparent double-sided adhesive tape, 5mm wide and 50m long- After its removal it leaves no residue- Given its versatility it will allow multiple use options Code I0147 Last items in stock Price €2.90
LED 1W Red SMD Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 32mil Chip - Voltage: 2.2-2.4V - Current: 300mA - Luminous flux: 40-50LM - Ã beam angle: 120 degrees - Color emission: red Code P0044 Available Price €0.98
Cables for Multimeter 2 Cables for 1M Multimeter Meter features: - Voltage 1000V, 10A CAT III- Total length 110cm- Red and black colors Code K0012 Available Price €3.95
PLA Filament 1.75mm 1kg fluorescent yellow colour Filament of PLA HD material, perfect for basic and fast projects that do not need excessive durability, for 3D printers. The diameter of the filament is 1.75mm. The package contains 1kg of fluorescent yellow coloured filament Code I0704 Backorder Price €17.49
12V On/Off LED Pushbutton Blue 16mm N/A NO Characteristic:- For panel N / A NO 2A 36V Stainless Steel on / off- Type of operation: On / Off- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A / 12VDC- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C- Color: Blue Code K0192 Available Price €5.89
12V Push Button LED Green 16mm 12V Push Button LED Green 16mm features:- Momentaneo panel N/A NO with return 2A Steel- Type of operation: momentary (automatic return)- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A / 12VDC- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C Code K0097 Available Price €5.89
DIP Switch - DS-06 Horizontal High Profile 6 Positions The DIP switch type THT (6 rows 12 Pins) with a pitch of 2.54mm / 0.1 ". It works with the current of 50mA DC 12V. Code K0266 Available Price €0.99
DIP Switch - DS-03 Horizontal High Profile 3 Positions The DIP switch type THT (3 rows 6 Pins) with a pitch of 2.54mm / 0.1 ". It works with the current of 50mA DC 12V. Code K0263 Available Price €0.59
Black DIP Switch 2 Positions 2.54mm Step 4 Pins Black DIP Switch 2 Positions 2.54mm Step 4 Pins features: - Switch: DIP- Type: SMD 2 positions (2 rows 4 Pins)- Step: 2,54mm / 0,1 "- No switching Rating: 100mA DC 50 V- Switching: 100mA DC 24V- Contact resistance: -50mΩ 24VDC / 100mA -100mΩ typical, 24VDC / 100mA- Size 10x6x4,5mm / 0,4x0,24x0,18 "- Main material: Plastic, Metal- Color: Black Code K0116 Available Price €0.99
Electromagnetic switch - emergency start/stop KJD6 6A / 250V WITH FRAME The electromagnetic switch has a built-in coil which, after a power failure, automatically disconnects the switch and protects the device against automatic restart after reconnecting the power. It is used on woodworking and tiling machines, saws, grinders and table drills, etc. The button has a panel that allows it to be screwed to the device. Code K0320 Available Price €13.99
Vertical Slide Switch 3P2T 50V 0.5A 6 DIP pins and 2 positions DPDT. This switch is widely used to control the operation of many small electronic power projects, including volume and other controls for audio video, dimmer controls for lights.It is also a great component for DIY. Vertical Slide Switch 3P2T 50V 0.5A features: - Type: 3P2T- Contact resistance: 30 MΩ max.- Insulation resistance: 100 MΩ- Maximum operating voltage: 50V- Maximum operating current: 0.5A- Can support 500 VAC for 1 minute- Step between pins: 2.54mm / 0.1 "- Pin size: 4.5x0.5x15 / 0.77 "x0.19"- Type of current: DC- Pins to be welded- Switch action: 2 ON / OFF positions- Shape of interrupter: rectangular- Size: 16x6.5x15 / 0.2 "x0.02" Code K0188 Available Price €0.48
Kao-10KH Manual Motor Control Ip65 Water Arduino Plc Button Panel A KAO-10KH start/stop button panel. Code K0405 Available Price €11.95
12V Momentary LED Pushbutton Blue 16mm N/A NO 12V Momentary LED Pushbutton Blue 16mm N/A NO features:- Type of operation: momentary (automatic return)- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A / 12VDC- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C- Color: Blue Code K0099 Available Price €5.89
5x Pushbutton B3F Green Key Omron Electronica for Arduino Prototype Switch 12 5x Pushbutton B3F Green Key Omron Electronica Arduino Prototype Switch 12 features:- 5x Pushbuttons B3F Omron- 5x Keys- Maximum current: 50mA- Tension DC: 24V- Operating force: 1.27N- Switch terminals - Weldable- Contact: SPST-NO- Contact resistance: 100M Ohm- Type of action: Superficial- Measures: 12x12x7.3mm Code K0075 Available Price €0.20
12V On/Off LED Pushbutton Blue 16mm N/A NO Characteristic:- For panel N / A NO 2A 36V Stainless Steel on / off- Type of operation: On / Off- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A / 12VDC- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C- Color: Blue Code K0192 Available Price €5.89
Switch Button 8x8mm on-off Switch Button 8x8mm on-off features:- Switch terminals: Weldable- Measures: 8x8x13mm Code K0078 Available Price €0.22
Switch On/On 3-pin 6A SPDT This switch can be used for development projects and for the industry. All metal parts are not oxidized, the insulation material is of high quality.Its pins protected by an anti oxidant makes welding much easier. Switch On/On 3-pin 6A SPDT features: - Type: Latch SPDT- Material: Plastic, metal- Maximum operating current and voltage: 3A / 250V, 6A / 125V- Number of pins: 3- Pin size: 4.5x2 mm- Type of current: AC/DC- Pins to be welded- Switch action: 2 positions On/On- Size: 13.2x12.7x33.3mm Code K0420 Available Price €0.49
12V Momentary LED Push button Red 16mm N/A NO 12V Momentary LED Pushbutton Red 16mm N/A NO features:- Type of operation: momentary (automatic return)- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A / 12VDC- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C- Color: Red Code K0191 Available Price €5.89
Momentary Switch Push Button Red N/O 7mm Momentary Switch Push Button Red N/O 7mm features: - Momentary pushbutton N/O (normally open)- Red button- Dimensions approx. 7 mm x 27 mm- Recessed with nut and washer- Load current (supported): 1A to 230V / 2A to 125V- Drill to embed: 7 mm +/- 0.2- Operating temperature: -55º to +85ºC Code K0156 Available Price €0.45
Rocker switch KCD4 Momentary 15A 250V Double (ON)-OFF-(ON) The AC 250V 15A 6-pin rocker switch type DPDT (On/Off/On) Code K0403 Available Price €1.95
Rocker switch KCD4 momentary 15A 250V Double (ON)-OFF Red The AC 250V 15A 6-pin DPST (on)/off type rocker switch. Code K0402 Available Price €1.90
12V Momentary LED Pushbutton Blue 16mm N/A NO 12V Momentary LED Pushbutton Blue 16mm N/A NO features:- Type of operation: momentary (automatic return)- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A / 12VDC- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C- Color: Blue Code K0099 Available Price €5.89
Kao-10KH Manual Motor Control Ip65 Water Arduino Plc Button Panel A KAO-10KH start/stop button panel. Code K0405 Available Price €11.95
Push button 6x6x5mm 2pins Push button 6x6x4mm features: -Touch Push Tact Switch mini electronic Arduino push button -Measures: 6x6x45mm -Quantity: 1 unit Code K0269 Available Price €0.24