Raspberry Pi Zero WH 512MB RAM WIFI BLE 4.1 with soldered connector

All ports and slots on the case can perfectly match Raspberry Pi 4 Model B. Acrylic box with fan for Raspberry Pi 4 model B features:
- clear acrylic case x 1 You. - 5Vdc fan - mounting screw x 1 set Note: The Raspberry Pi board is not included.

The module has two outputs: analog A0 and digital D0
Digital output D0 - signal 0 appears or 1 depending on the threshold setting
The threshold is set with the potentiometer
The sensor can be used for example:
Automatic watering for potted plants
With this module you will be able to measure the humidity of the soil, so that you will be able to control the humidity level of the soil of your plants
Characteristic:
Operation: 3.3V -5V
- Sensitivity adjustable by potentiometer
- Dual output mode: analog and digital
- Red LED - power indicator
- Green LED - indicator digital switching output
- PCB measurements: 3 x 1.5 cm
- Probe measurements: 6 x 3 cm

10x Strip 6 Pin Female Short features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Through
- Quantity: 10 units of strips of 6 female pins each

CP2102 USB 2.0 to RS232 RS485 TTL 3.3V 5V converter features:
- Ideal for connecting TTL RS232 RS485 devices to your PC through the USB port

WIFI transceiver based on the ESP8266 controller.
It has a microcontroller and 2 GPIO pins to be able to operate autonomously without the need for an external microcontroller. Characteristic: - Voltage of power: 3.3V
- Supported protocols: 802.11 b / g / n
- Network support: 2.4 GHz
- Band: 2400 (MHz)
- Wi-Fi Direct (P2p), Soft Access Point
- Integrated TCP / IP stack
- PLL, regulators and integrated power management units
- Output power: 0.15 (W); + 19.5dBm in 802.11b mode
- Consumption in low power mode:

15x Strip 5 Pin Female Short features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Through
- Quantity: 15 units of strips of 5 female pins each

50cm HDMI V1.3 Male to Raspberry PI 1080P Gold Silver features:
- For Raspberry Pi 2 and Pi 3, B and B +
- HDMI V1.3b cable and full 1080P (category 2) resolution
- Type A male at both ends
- High quality gold shielded connectors
- Manufactured with high quality copper conductors (OFC-Oxygen Free Copper- 99.99%) that guarantees the highest transmission quality
- Refresh rates up to 120Hz
- Length: 50cm
- Quantity: 1 unit

RGB LED Strip WS2812B Black 1m 30 LED/M IP65 features:
- RGB LED WS2812B
- WS2812B are LEDs that have integrated logic, making it possible to vary the color of each LED in a way individual
- WS2812B includes a built-in inside each LED, which allows each pixel to be accessed individually
- For this reason, these types of LEDs are called individually indexable.
- They are based on the 5050 LEDs
- 30 individually indexable LED diodes
- 24-bit color control (8-bit PWM per channel)
- 16.8 million colors per LED
- Communication One-wire
- Power: 5 V
- Width: 11 mm
- Thickness: 2.6 mm
- Length: 1 meter
- Consumption: 1.8A (all white)
- Waterproof
- With 3M adhesive