Strip WS2812B 5m 30 LED /m white RGB
  • Strip WS2812B 5m 30 LED /m white RGB
  • Strip WS2812B 5m 30 LED /m white RGB
  • Strip WS2812B 5m 30 LED /m white RGB
  • Strip WS2812B 5m 30 LED /m white RGB

Strip WS2812B 5m 30 LED /m white RGB

P0106

RGB LEDs WS2812B
WS2812B are LEDs that have integrated logic, so it is possible to vary the color of each LED individually.
WS2812B includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are called individually indexable.
They are based on the 5050 LED. 30 individually indexable LEDs.
24-bit color control (8-PWM) -bit per channel)
16.8 million colors per LED
One-wire communication
Power: 5 V
Width: 11 mm
Thickness: 2.6 mm Length: 5 meters
Consumption: 1.8A (all white)
Waterproof
With 3M adhesive
Input and output terminals (data and power) Links
https://learn.adafruit.com/adafruit-neopixel-uberguide/>

OEM
Add to wish list

RGB LEDs WS2812B
WS2812B are LEDs that have integrated logic, so it is possible to vary the color of each LED individually.
WS2812B includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are called individually indexable.
They are based on the 5050 LED.

30 individually indexable LEDs.
24-bit color control (8-PWM) -bit per channel)
16.8 million colors per LED
One-wire communication
Power: 5 V
Width: 11 mm
Thickness: 2.6 mm
Length: 5 meters
Consumption: 1.8A (all white)
Waterproof
With 3M adhesive
Input and output terminals (data and power)

< p> Links
https://learn.adafruit.com/adafruit-neopixel-uberguide/powering-neopixels

https://learn.sparkfun.com/tutorials/ws2812 -breakout-hookup-guide


Arduino Library

https://github.com/pololu/pololu-led-strip-arduino

Customers who bought this product also bought

40x Male to male cables 20cm

Characteristic: -Length: 20cm
-Quantity: 40 cables
-Mono Dupont connectors on both ends
-Compatible with 2.54mm female connectors
-High quality and good working condition
-Easy to install and use

K0006

Price €2.49

Power Supply Transformer 220V AC/DC 2A 5V

Power Supply Transformer 220V AC/DC 2A 5V features:
- Input voltage: 100~240V 50Hz
- Output voltage: DC 5V
- Output current: 2A
- DC connector: 5.5 mm x 2.1 mm
- Cable length: Approx. 90 cm
- Indicator of operation: LED diode

A0102

Price €3.99

Vertical Liquid Level Sensor Switch

Level sensor for liquids with float.
The liquid level sensor acts as a switch. The state is changed by means of a magnet located on the float. It can be used to detect liquid levels that are too high or too low.
Ideal for all those applications where it is necessary to control the level of non-corrosive liquids such as water tanks, aquariums.
Characteristic:
- Maximum Load: 50W
- Maximum Switching Voltage: 250V
- Maximum Switching Current: 0.5A
- Maximum charging current: 1A
- Operating temperature: -10ºC to + 60ºC
- Size: 58mm x 18mm

S0043

Price €2.95

DHT11 Module Temperature and Humidity Sensor

The DHT11 humidity sensor is presented in a plastic body ideal for mounting on a panel or similar. It uses a capacitive sensor that returns a digital signal with the measurement.
Characteristic:
- Operating voltage: 3 to 5 VDC - Humidity measurement range: 20-95% ± 5% accuracy
- Temperature measurement range: 0ºC to 50ºC ± 2º accuracy
- Maximum sampling rate: 2 seconds - Working current 2.5mA
- 1-wire interface
- Dimensions: 32 x14 mm
- Quantity: 1 unit with 3x female / female cables

S0001

Price €2.99

GPS Mini Station NEO-6M-0-001 with EEPROM SMA IPEX Ports

It is a mini GPS module including a NEO-6M chip and an EEPROM memory chip.
The SMA antenna port is On-board IPEX and cell phone button battery ensure robust positioning efficiency and fast satellite discovery speed.
Serial port provides simple initial knowledge to stay in touch with the most compatible Arduino-compatible MCU STM32. Characteristic: - Supply voltage: 3.3 - 5 VDC
- Operating current: 45 mA
- Communication speed: 9600 Bauds configurable from 4800 to 115200 Bauds
- Navigation update: 5 Hz max. (1 Hz default)
- Capture time: at the start 27s, in operation 1s
- Operating temperature: -40 ° C - + 85 ° C
- separate GPS antenna (not included ): 18x18 mm
- Size: 22x30x13 mm

M0070

Price €14.90

M12 Inductive Proximity Sensor PNP DC 6-36V LJ12A3-4-Z/BY 3D Printer

M12 Inductive Proximity Sensor PNP DC 6-36V LJ12A3-4-Z/BY 3D Printer features:
- This sensor can be configured as auto Z axis level
- Sensor detection switch inductive proximity LJ12A3-4-Z / BY
- PNP DC6-36V
- Often used for 3D printer bed leveling
- Typical application: printer bed level sensor 3D
- Cylindrical cable type DC 3 cable type (black, brown, blue)
- Inductive sensor type
- PNP NO (Normal Open)
- Detecting Distance 4mm - DC supply voltage 6-36V
- Current output 300mA
- Response frequency 0.5KHz
- Detects iron / aluminum
- Operating temperature -25 ° C at + 55 ° C (Non-freezing condition)
- Head diameter 12 mm
- Size 6.2 x 2cm
- Cable length 100cm

S0036

Regular price €3.99 -€0.50 Price €3.49
€39.91
Save €10.00 €29.91

24,72 tax excl.

Tax included 1
Last 5 items
Regular price €39.91 Price €29.91

Order until 4pm we will send today
30 days return