Compressed gas 600ml Spray Cleaner
  • Compressed gas 600ml Spray Cleaner

Compressed gas 600ml Spray Cleaner

Q0101

Compressed gas 600ml Spray Cleaner features:
- Cleaning computers, keyboards, electronics, printers
- All types of office material
- Made in the EU - HIGH QUALITY
- When using the cleaner, remember to turn off your electronic devices and wait until the gas has evaporated before turning on the devices
Termopasty
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Compressed gas 600ml Spray Cleaner features:


- Cleaning computers, keyboards, electronics, printers
- All types of office material
- Made in the EU - HIGH QUALITY
- When using the cleaner, remember to turn off your electronic devices and wait until the gas has evaporated before turning on the devices
- Provides a breath of intense and concentrated air to inaccessible areas, perfectly eliminates the dust of several elements, even the most inaccessible, especially where you can not apply wet cleaning or solvent and where the dust must be removed completely, leaving the area absolutely clean Does not leave traces, perfectly suitable for cleaning: computers, office equipment, cash registers, printers, photographic equipment, fine mechanisms, telecommunications. Applications: - Computers
- Office team
- Cash registers
- Printers
- Photographic equipment
- Fine mechanisms
- Telecommunications

Data sheet

Tipo
Limpiador
Forma
Spray
Volumen [ml]
600

Customers who bought this product also bought

20x M2.5x6 Nylon Screw

20x M2.5x6 Nylon Screw features:
-Polyamide 6mm Thread Arduino Robot PCB Screw
-M2.5 Screw
-Thread: 6mm
-Round head
-Star (Philips) DIN7985
-Quantity: 20 units
-Color: white

H0072

Price €0.19

Electrostatic Brush ZD-155E 180 mm

Use the right tool for every need.
It is a special electrostatic brush for cleaning electronic components or places where the electrostatic charge must be taken into account. Electrostatic Brush ZD-155E 180 mm features:
- Model: ZD-155E
- Brush length: 180 mm
- Hair length: 16 mm
- Number of hair groups: 20

H0136

Price €1.55

Bluetooth Transceiver Module HC-06 Wireless

HC-06 Bluetooth transceiver module with base.
The bluetooth module HC-06 is one of the best options for projects, in which you need wireless communications.
The transceiver module allows bluetooth wireless connections as a slave, ready to listen for connection requests.
Bluetooth Transceiver Module HC-06 Wireless features:
- Chipset CSR BC417
- 3.5V - 5V power
- Bluetooth version V2.0 + EDR
- Frequency: 2.4GHz ISM band
- Modulation: GFSK
- Reach approx. 10m
- Security: Authentication and encryption.
- Speed-> Asynchronous: 2.1Mbps (Max) / 160 kbps; Synchronous: 1Mbps / 1Mbps
- Supports AT commands for configuration through a serial port
- Working temperature: -20ºC to + 75ºC
- Working current - pairing: 80 mA

W0009

Price €5.39

HC-SR501 Motion Detector Module Passive Infrared PIR Sensor

Arduino compatible IR motion detector with a detection range of 7 meters and an operating angle of 120º.
An electric pyro sensor , which can detect infrared radiation levels - detect a change in the average IR levels of your detection zone.
Ideal for projects with ARDUINO, PIC, AVR, STM32. HC-SR501 Motion Detector Module Passive Infrared PIR Sensor features:
- Infrared sensor with control circuit
- Adjustable sensitivity and time
- Operating voltage: 4.5V- 20V
- Consumption in Idle state:

S0003

Price €1.79

Sodium Persulfate B327 (PCB) Printed Circuit Board Etching 1kg

Sodium Persulfate B327 (PCB) Printed Circuit Board Etching 1kg features:
A compound for etching of printed circuit boards and pickling of copper. An ideal alternative to ferric chloride. It is readily soluble and does not crystallize from the solution. It etches evenly, ensures the sharpness of contours and minimizes undercutting. Usage: Dissolve the preparation in 0.5 l of water at a temperature of 50°C. Perform etching at 40°C (max. 50°C). Bath movement ensures quicker etching. The etching solution must not be stored in hermetically sealed containers due to the risk of developing overpressure and cracks.

Q0027

Price €12.49

LDR Module Motor Resistance KY-018

This module adapted for the arduino is a light sensor. The resistance of the LDR cell decreases as the light intensity increases.
On the contrary in a dark environment, the resistance of the LDR cell increases accordingly. Characteristic: - 3-pin connector: 1- GND
2- VCC
3- analog output - the voltage depending on the light
- Supply voltage: 3.3 V-5VDC
- PCB size: 19x15x8 mm

S0122

Price €1.39

10x Photoresistor GL5528 LDR

Photoresistor is a resistor whose resistance decreases with increasing intensity of light
that affects her 10x Photoresistor GL5528 LDR features:
- Model: GL5528
- Spectral peak: 540nm
- Maximum DC voltage: 150V
- Maximum power: 100mW
- Resistance with light (10lux): 10-20KΩ
- Resistance with darkness (0lux): 1MΩ
- Response time: 20ms
- Operating temperature: -30ºC - 70ºC
- 10k - 20k Arduino PiC 5mm
- Quantity: 10 units

S0050

Price €0.15
€6.59

5,45 tax excl.

Tax included 1
Last 5 items
Price €6.59

Order until 4pm we will send today
30 days return