HCF4017BE DIP16 Counters/Dividers ST Microelectronics Integrated Circuit
  • HCF4017BE DIP16 Counters/Dividers ST Microelectronics Integrated Circuit
  • HCF4017BE DIP16 Counters/Dividers ST Microelectronics Integrated Circuit

HCF4017BE DIP16 Counters/Dividers ST Microelectronics Integrated Circuit

T0062

HCF4017BE DIP16 Counters/Dividers ST Microelectronics Integrated Circuit features:
- Blister: DIP16
- Number of pins: 16
- Step between pins: 2.54 mm
- Manufacturer: ST Microelectronics - VDD power supply voltage: 3 - 15 VDC
- Input voltage: VDD
- High output voltage level V (OH): 4.95 - 14.95 VDC
- Output voltage low level V (OL): 0.05 VDC
- High input voltage level V (IH): 3.5 - 11 VDC
- Input voltage low level V (IL): 1.5 - 4 VDC - Inactive state current: 0.04 - 600 μA
- Output drive current I (OH): -2.4 - 0.36 mA
- Output leakage current I (OL): 0.36 - 2.4 mA
- Input leakage current I (IH), I (IL): ± 1 μA - Operating temperature: -40 ° C to 85 ° C
- Storage temperature: -65 ° C to 150 ° C
OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

HCF4017BE DIP16 Counters/Dividers ST Microelectronics Integrated Circuit features:


- Blister: DIP16
- Number of pins: 16
- Step between pins: 2.54 mm
- Manufacturer: ST Microelectronics - VDD power supply voltage: 3 - 15 VDC
- Input voltage: VDD
- High output voltage level V (OH): 4.95 - 14.95 VDC
- Output voltage low level V (OL): 0.05 VDC
- High input voltage level V (IH): 3.5 - 11 VDC
- Input voltage low level V (IL): 1.5 - 4 VDC - Inactive state current: 0.04 - 600 μA
- Output drive current I (OH): -2.4 - 0.36 mA
- Output leakage current I (OL): 0.36 - 2.4 mA
- Input leakage current I (IH), I (IL): ± 1 μA - Operating temperature: -40 ° C to 85 ° C
- Storage temperature: -65 ° C to 150 ° C

Customers who bought this product also bought

Mini vibration engine for Arduino and Raspberry Pi 5 VDC

This mini vibration motor runs on 5 VDC and can be used for Arduino and Raspberry projects. It is a direct current motor.
Mini vibration engine for Arduino and Raspberry Pi 5 VDC features:
- Voltage: 5 VDC,
- Current: 75mA,
- Rotation speed: 1100 (rpm),
- Efficiency: 80%,
- Dimensions: 10x27mm.

M0174

Price €0.83

Arduino compatible Attiny85 Digispark board

Digispark is a development board based on the ATTINY85 microcontroller from ATMEL born in a successful campaign on Kickstarter.
Similar to the Arduino line , It is one of the smallest boards on the market.
Programmable directly from USB with the same Arduino tools. It has a built-in Micronucleus bootloader and can be replaced by similar ones such as the Trinket bootloader. Adafruit or others.
You can use many of the same Arduino libraries and you have your own on the digispark wiki. Arduino compatible Attiny85 Digispark board features:
- USB power supply
- External power supply (7v-35v DC 12v maximum recommended)
- 5V DC 500mA regulator on board
- Programmable with the Arduino IDE
- Loaded with Micronucleus bootloader

B0002

Price €4.05

Passive Buzzer 5V

The piezoelectric buzzer has a simple structure in which a ceramic piezoelectric disk is affixed to a vibrating plate. An alternative voltage applied to this element will cause a contraction or diametrical expansion of the element. This feature is used to fold a vibrating plate, which generates sounds. 2x Passive Buzzer 5V features:

- Input voltage: 3V to 12V
- Diameter: 12mm
- Height: 7.5mm
- Pin spacing: 6.5mm
- Impedance: 16 Ohm
- Working frequency: 2 to 5 KHz
- Quantity: 1 unit

M0011

Price €0.32

VGA camera 640x480 OV7670 B 0.3MPx 30fps Cmos

Camera module for Arduino, Raspberry Pi 2 and Pi 3, B and B +. VGA camera 640x480 OV7670 B 0.3MPx 30fps Cmos features:
> - Input voltage 2.5V-3V
- Operating power 60mW / 15fps VGA YUV
- Resolution VGA 640x480 pixels (30fps)
- Maximum frame rate 30fps VGA
- Flicker 50Hz / 60Hz automatic detection
- Lens size 1/6 "
- Angle of view 25 °
- Sensitivity 1.3V / (lux- seg)
- SCCB (Serial Camera Control Bus) interface
- Output format · 8 Bits
- YUV / YCbCr 4: 2: 2
- RGB 565/555/444
- GRB 4: 2: 2
- RAW RGB data
- High sensitivity Light operation
- Automatic adjustment
- Color level saturation - Edge enhancement
- Noise level

M0103

Regular price €4.79 -€1.00 Price €3.79

Momentary Switch Push Button Red N/O 7mm

Momentary Switch Push Button Red N/O 7mm features:
- Momentary pushbutton N/O (normally open)
- Red button
- Dimensions approx. 7 mm x 27 mm
- Recessed with nut and washer
- Load current (supported): 1A to 230V / 2A to 125V
- Drill to embed: 7 mm +/- 0.2
- Operating temperature: -55º to +85ºC

K0156

Price €0.37
€0.91

0,91 tax excl.

1
30+ items
Price €0.91

Order until 4pm we will send today
30 days return