Printed Circuit Board Terminal 2 poles 5.08mm pitch Blue 2 pole PCB mount screw terminal 5.08mm pitch Printed Circuit Board Terminal 2 poles 5.08mm pitch features: Number of Contacts: 2 Pitch: 5.08mm Number of Rows: 1 Mounting Type: PCB Gender: Male Allowable Section: 1.5mm2 (22- 14 AWG) Termination method: screw Type: screw terminal block Nominal current: 16A Nominal voltage: 250V Color: blue Material: Nylon 66 Depth: 10mm Width: 7.5mm Length: 10mm Code K0217 Available Price €0.25
Printed Circuit Board Terminal 3 poles 5.08mm pitch Blue 2 pole PCB mount screw terminal 5.08mm pitch Printed Circuit Board Terminal 3 poles 5.08mm pitch features: Number of Contacts: 3 Pitch: 5.08mm Number of Rows: 1 Mounting Type: PCB Gender: Male Allowable Section: 1.5mm2 (22- 14 AWG) Termination method: screw Type: screw terminal block Nominal current: 16A Nominal voltage: 250V Color: blue Material: Nylon 66 Depth: 10mm Width: 7.5mm Length: 10mm Code K0218 Available Price €0.34
UTP Ethernet Network Cable CAT 5E 1m Quantity: 1 meter Characteristic: - Temperature range: -20 to 80 degrees centigrade - Max. operating voltage: 60 V (RMS) - Nom. 1 kHz capacity: 15 pf / ft - Max. pulling force: 15.70 kg - Nominal weight (305 m): 8.2 kg - Min. Radius of curvature: 12.7mm Construction and dimensions of the cable: the Conductor: - Material: CCA - Dimensions of the conductor (diameter of a single cable): 0 , 48 mm (24 AWG) - Conductor outer insulation: polyethylene. - Insulated conductor dimensions: 0.89 +/- 0.05 mm External insulation: - Material: PVC - External dimensions cable: 5.0 +/- 0.20 mm Code K0222 Available Price €0.33
RJ45 8p8c Cat5e Ethernet network connector for crimping Quantity: 1 unit Type 8p8c Code K0221 Available Price €0.13
SparkFun Qwiic Adapter This little board is simply a I2C board to Qwiic converter. It pretty much enables any device with I2C connectors to work with Qwiic system. It has two Qwiic ports - both of them served with the same I2C bus. You simply stick the board on your I2C board and get additional two Qwiic ports. It is as easy as it sounds Code SP033 Available Price €1.89
MR30PW-M Socket DC supply MR30 male PIN: 3 MR30PW-M Socket DC supply 3 pins, current rating: 15A, rated voltage: 500V Code K0268 Available Price €0.95
MR30PW-FB Socket DC supply MR30 female PIN: 3 MR30PW-FB Socket DC supply female 3 pins, current rating: 15A, rated voltage: 500V Code K0267 Available Price €0.95
Flat female power supply socket, uninsulated 6.3 / 0.8 mm Uninsulated female flat faston power supply terminal 6.3 / 0.8 mm Code K0321 Available Price €0.10
MyoWare Cable Shield This Shield provides a 3.5mm connector where you can connect a three-electrode sensor cable, allowing you to test and use the MyoWare muscle sensor without actually connecting it to your person. Code SP072 Backorder Price €6.49
MyoWare Shield - Mini protoboard for MyoWare sensor Simple breadboard for your MyoWare Muscle Sensor. You can use the provided area of the shield to solder in any custom circuit you can think of. This shield provides 8 x 15 solderable through holes on a standard 0.1" grid. Code SP070 Last items in stock Price €3.29
MyoWare Power Shield MyoWare Power Shield is designed to use two standard CR2032 coin cell batteries to power the MyoWare muscle sensor. These will be connected in parallel for extended capacity at a nominal 3.0V. Code SP071 Backorder Price €6.49
Sensor Cable - Electrode Pads (3 connector) This is your simple three conductor sensor cable with electrode pad wires. These cables measure 24" long and feature a 3.5mm audio jack on one end with snap type receptacles for biomedical sensor pads. Code SP075 Available Price €8.99
Strip Macho 40 Pins Doble 2x20 Right Angle Connector with 40 pins in double rows, ready to break and with 90 ° angle for vertical use. Code K0299 Available Price €0.69
Connector Jack DC Male 2.1x5.5mm Quick Wire Connector Male jack connectors (2.1mm internal and 5.5mm external) for powering devices such as 12V/ 24V LED strips, CCTV (Cameras), Arduino. Easy to install, quick connector without screw - Quick Wire Connector. Code K0443 Available Price €0.89
Connector Jack DC Female 2.1x5.5mm Quick Wire Connector Female jack connectors (2.1mm internal and 5.5mm external) for powering devices such as 12V/ 24V LED strips, CCTV (Cameras), Arduino. Easy to install, quick connector without screw - Quick Wire Connector. Code K0442 Available Price €0.89
MyoWare 2.0 Cable Shield This Cable Shield provides a 3.5mm connector where you can connect a three-electrode sensor cable, allowing you to test and use the MyoWare 2.0 muscle sensor without actually connecting it to your person. Code SP045 Available Price €7.49