Printed Circuit Board Terminal 3 poles 5.08mm pitch

Relay Module DC 5V 10A 2 Channel Low/High Trigger features:
- Channels: 2 (independent protected with Optocouplers)
- Supply voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- Trigger signal type jumper (low / high)
- LED indicator: For each channel
- Dimensions: 40x 50mm
- It has a jumper that allows to choose type of trigger signal (low / high)
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)

Gear Reducer Motor 6V DC 200RPM for Smart Car features:
- Voltage: 3 to 6V DC
- Speed without load: 200 RPM to 6V DC
Helpful Links:
Operation of the robot by Infrared / Operation of the robot by Bluetooth / Automatic operation with detection of obstacles
- Wiring of the 6V DC 200 RPM motor with the L298N double bridge H controller module

Soldering Iron 40W features:
- Power: 40W
- Power: 230V
- Equipped with tip B1
- Long length tip: 1mm
- Anti-thermal handle
- CE, RoHS and TUV certifications

Low voltage yellow PVC multiconductor (stranded) flexible cable. Number of conductors 1x1.00mm2. Complies with EN 50575:14. Very suitable for making connections in electronic projects.

Ideal for projects with ARDUINO, PIC, AVR, Raspberry
The infrared receiver receives the signal of 38kHz for remote control

M12 Inductive Proximity Sensor PNP DC 6-36V LJ12A3-4-Z/BY 3D Printer features:
- This sensor can be configured as auto Z axis level
- Sensor detection switch inductive proximity LJ12A3-4-Z / BY
- PNP DC6-36V
- Often used for 3D printer bed leveling
- Typical application: printer bed level sensor 3D
- Cylindrical cable type DC 3 cable type (black, brown, blue)
- Inductive sensor type
- PNP NO (Normal Open)
- Detecting Distance 4mm - DC supply voltage 6-36V
- Current output 300mA
- Response frequency 0.5KHz
- Detects iron / aluminum
- Operating temperature -25 ° C at + 55 ° C (Non-freezing condition)
- Head diameter 12 mm
- Size 6.2 x 2cm
- Cable length 100cm

The MAX9812 is a sound amplifier specially designed to treat the signal coming from microphones.
We can use it together with Arduino to measure sound from a processor like Arduino.
When we saw the modules with microphone we commented that, in general, the signal generated is too low to be registered correctly.
If we want to be able to measure sounds, we will have to amplify the signal. The MAX9812L has single / dual inputs, fixed gain of 20dB, bandwidth of 400 kHz, low noise and low signal distortion 0.015% THD.
There are two models, its supply voltage is 2.7V to 3.6V.
We can use the sensors with MAX9812 for applications that require measuring the intensity or frequency of the sound.

Lot of 100unds Red Nylon Clamps features:
- Plastic flange, polyamide 100x2.5mm plastic flanges - quantity: 100units