Displays

LCD TFT Display Screen 2.4 240x320 UNO Mega2560 SD features:
- LCD screen TFT 240x320 pixels
- Power 2.8-3.3V
- 262,000 possible colors (18 bit)
- 8/16 bit parallel bus digital interface
- LCD Controller: ILI9325
- Touch screen controller: XPT2046
- Touchscreen, resistive touch screen
- Manual use or with any type of pointer
- SD card reader
- Connector: 2 x 20 pins 2.54mm
- Dimensions PCB 75x55 mm
- Dimensions LCD 59x42 mm
- Ideal for projects with ARDUINO Uno Mega, AVR, STM

LED Writing Board 300x400mm with Control Light Patterns and 8 Neons features:
- Input power supply: 100-240 VAC - 50/60 Hz
- Output power supply: 12 VDC
- Max. Output current: 1A
- Can match any national power source
- Long-lasting LED light source, support being lit more than 100 000 hours without interruption
- Control of colors integrated in the USB adapter: it allows to emit several functions and models of light blinking
- LED capable of emitting 36 different colors
- Includes plug, USB adapter and control
- Screen size: 300x400 mm
- This product conforms to CE, FC and RoHS certificates
- The surface is made of rigid abrasion resistant acrylic board, with superb translucency for efficient lighting.

LCD TFT Display Module 240x320 2.4 SPI features:
- LCD screen TFT 240x320 pixels
- 262,000 possible colors (18 bit)
- Pixel: RGB vertical band
- Driver ILI9341
- SPI interface
- 8-bit digital interface, 4-bit control lines
- Resistive touch screen 4 - cables
- Ideal for projects with ARDUINO, Uno R3, MEGA2560
Helpful Links:
Wiring of the TFT LCD screen 2.4 SPI
- Connect the TFT 2.4 SPI LCD screen with the UNO module
Display graphics and texts on the LCD TFT screen 2.4 SPI
Program a touch calculator on the LCD screen TFT 2.4 SPI

LED Writing Board 400x600mm with Control Light Patterns and 8 Neons features:
- Input power supply: 100-240 VAC - 50/60 Hz
- Output power supply: 12 VDC
- Max. Output current: 1A
- Can match any national power source
- Long-lasting LED light source, support being lit more than 100 000 hours without interruption
- Control of colors integrated in the USB adapter: it allows to emit several functions and models of light blinking
- LED capable of emitting 36 different colors
- Includes plug, USB adapter and control
- Screen size: 400x600 mm
- This product conforms to CE, FC and RoHS certificates
- The surface is made of rigid abrasion resistant acrylic board, with superb translucency for efficient lighting.

TFT LCD 34pins Expansion Board Adapter 3.2" 4.3" 5.0 Shield Mega 2560 features:
- Facilitates connections between the LCD TFT Touch 3V 2.4 ", 2.8", 3.2 "etc. with SD card reader and the Arduino Mega 2560 board
- Put the screen on the Shield and you can connect it directly to the Arduino Mega2560.
- TFT LCD MFT TFT LCD PCB adapter for Arduino Mega2560 STM32
- The TFT01 LCD operates at 3.3V and can not be used directly on the standard Arduino motherboard at the top.
- The TFT LCD PCB adapter for Mega is compatible with the Arduino pins, the user can directly connect the TFT LCD PCB - Adapter on the shield and stand on the Arduino board. It can be used with a Mega2560 and LCD screen.

LED Writing Board 500x700mm with Control Light Patterns and 8 Neons features:
- Input power supply: 100-240 VAC - 50/60 Hz
- Output power supply: 12 VDC
- Max. Output current: 1A
- Can match any national power source
- Long-lasting LED light source, support being lit more than 100 000 hours without interruption
- Control of colors integrated in the USB adapter: it allows to emit several functions and models of light blinking
- LED capable of emitting 36 different colors
- Includes plug-in, USB adapter integrated with controller
- Screen size: 500x700 mm
- This product conforms to CE, FC and RoHS certificates
- The surface is made of rigid abrasion resistant acrylic board, with superb translucency for efficient lighting.

LCD TFT Shield Adapter 2.4" Touch 3V Expansion Board R3 features:
- Shield LCD TFT 2.4 "Touch 3V expansion board for Uno R3
- Facilitates connections between the TFT LCD 2.4 "Touch 3V with SD card reader and the Arduino UNO board
- Put the screen on the shield and you can connect it directly to the Arduino UNO
- UNO R3 2.4 "TFT LCD shield TFT LCD PCB Adapter for Arduino UNO STM32
- The TFT01 LCD screen operates at 3.3V and can not be used directly on the standard Arduino motherboard at the top
- The TFT LCD PCB adapter for UNO is compatible with the Arduino pins, the user can plug directly the TFT LCD PCB adapter into the shield and placed on the Arduino board. - Can be used with a UNO and LCD screen

1.44 inch TFT LCD screen 128x128 SPI features:
- TFT LCD screen 128x128 pixels
- 4-wire SPI interface (A0, SDA, SCK, CS)
- Size: 1.44 inches
- Interface: SPI
- Resolution: 128 * 128
- Visual area: 1: 1 square
- Color screen TFT, the effect is much better than other small CSTN displays
- Disk drive: ST7735
- Fully compatible and alternative 5110 interface
- Onboard LDO, 5V / 3.3 input voltage support V
- Screen dimensions: 30 x 28 mm
- PCB dimensions: 45 x 32 mm

8x Chalk Liquid Markers 6mm Fluorescent Highlighter features:
- Includes 8 markers each of different color purple, green, blue, white, yellow, pink, red and orange
- Liquid chalk of 6mm
- Size of the marker 14 cm
- Includes a rag to erase
- This product conforms to the CE, D-4236 and EN71 certificates
- Suitable for children 3 years and over
- This product is a portable tripod stand to hold LED writing boards of all sizes up to 24 "high and 36" wide
- His armor is made of metal covered with black protective paint
- It has its storage bag for easy storage and transportation wherever

LCD TFT Touch Screen Display 3.2inch 320x240, shield 34 pins.

- Pantalla LCD TFT 240x320 pixels
- 262.000 posibles colores (18 bit)
- Pixel: RGB vertical stripe
- Controlador ILI9341
- Interface SPI
- 8 bit interfaz digital, 4 bit líneas de control
- Pantalla táctil resistiva 4
- wires
- Ideal para proyectos con ARDUINO, Uno R3, MEGA2560 Enlaces útiles : Cableado de la pantalla LCD TFT 2.4 SPI
- Conectar la pantalla LCD TFT 2.4 SPI con el módulo UNO Visualizar gráficos y textos en la pantalla LCD TFT 2.4 SPI Programar una calculadora táctil en la pantalla LCD TFT 2.4 SPI

SONOFF POW Elite 16A is a power meter switch with a newly upgraded ESP32 chip that is 200% faster than the previous ESP8622 chip. Version without lcd display, you can track the real-time power, current and voltage of your appliances and the accumulated power consumption. 

1.8 TFT LCD screen with SPI interface and 5 control signals. Its touch screen is resistive, it has a resolution of 128x160 pixels.
Easily programmable with UNO module, Arduino, Raspberry, Mega2560.
LCD TFT Display Module 128x160 1.8 SPI features:
- TFT LCD screen 1.8 128x160 pixels
- Pixel: RGB vertical stripe
- Driver ILI9163,
- SPI interface: CS / MOSI / MISO / SCK (pins not soldered)
- 5-pin interface CS, RS, SCL, SDA, RST for control
- Resistive touch screen
- Ideal for projects with ARDUINO, Uno R3, MEGA2560

TFT LCD 40pins Expansion Board Adapter 3.2" 4.3" 5.0 Shield Mega 2560 features:
- Facilitates connections between the LCD TFT Touch 3V 2.4 ", 2.8", 3.2 "etc. with SD card reader and the Arduino Mega 2560 board
- Put the screen on the Shield and you can connect it directly to the Arduino Mega2560.
- TFT LCD MFT TFT LCD PCB adapter for Arduino Mega2560 STM32
- The TFT01 LCD operates at 3.3V and can not be used directly on the standard Arduino motherboard at the top.
- The TFT LCD PCB adapter for Mega is compatible with the Arduino pins, the user can directly connect the TFT LCD PCB - Adapter on the shield and stand on the Arduino board. It can be used with a Mega2560 and LCD screen.

LCD TFT Touch Screen Display 3.2 inch 320x240. Shied 40pins.

1.8 TFT LCD screen with SPI interface and 4 control signals.. It has a resolution of 128x160 pixels. Easily programmable with UNO module, Arduino, Raspberry, Mega2560.