Shields Arduino

It is a basic cable for connection of Qwiic elements featuresd with two JST 1mm connectors. The Qwiic cables are color coded and the connector is polarized making it easy and quick to connect the components. The cable is 100mm long

TFT LCD 40pins Expansion Board Adapter 3.2" 4.3" 5.0 Shield Mega 2560 features:
- Facilitates connections between the LCD TFT Touch 3V 2.4 ", 2.8", 3.2 "etc. with SD card reader and the Arduino Mega 2560 board
- Put the screen on the Shield and you can connect it directly to the Arduino Mega2560.
- TFT LCD MFT TFT LCD PCB adapter for Arduino Mega2560 STM32
- The TFT01 LCD operates at 3.3V and can not be used directly on the standard Arduino motherboard at the top.
- The TFT LCD PCB adapter for Mega is compatible with the Arduino pins, the user can directly connect the TFT LCD PCB - Adapter on the shield and stand on the Arduino board. It can be used with a Mega2560 and LCD screen.

The Portenta Breakout module extends the capabilities of the Arduino Portenta module with additional connectors and cables. The module includes a power switch, a DIP switch for selecting the start mode of the Arduino Portenta, as well as a series of connectors: USB A, RJ5, microSD, OpenMW, MIPI 20T JTAG. The board also includes the RTC chip, as well as a slot for the CR2032 battery, a screw connector for the power supply and all the cables for the Arduino Portenta module.

It is the ideal industrial upgrade for the powerful Arduino Portenta H7 that adds a low power Himax camera, two microphones, Ethernet connectivity and microSD slot, everything you need for the fast creation of cutting-edge ML applications. 

The Arduino Portenta H7 represents a new family of chips designed for IoT applications.  The board uses the STM32H747 microcontroller equipped with Cortex-M7 and Cortex-M4 cores, which allows it to run programs written in Arduino®, MicroPython or JavaScript. In addition, the Arduino Portent H7 is characterised by high performance and at the same time energy efficiency.

Getting started with Arduino? This multi-function shield for Arduino UNO is ideal for your first Arduino DIY projects. It includes 4 7-segment displays, buzzer, 3 push buttons, 4 LEDs, potentiometer and sockets.

A waterproof pentaband antenna X000016  for all your wireless projects with Arduino and development boards

This Shield provides a 3.5mm connector where you can connect a three-electrode sensor cable, allowing you to test and use the MyoWare muscle sensor without actually connecting it to your person.

Simple breadboard for your MyoWare Muscle Sensor. You can use the provided area of the shield to solder in any custom circuit you can think of. This shield provides 8 x 15 solderable through holes on a standard 0.1" grid.

This is the MyoWare Muscle Sensor Development Kit, an Arduino-powered electromyography (EMG) sensor kit that gives you the MyoWare, each MyoWare Shield and everything you need to connect them all together.

MyoWare Power Shield is designed to use two standard CR2032 coin cell batteries to power the MyoWare muscle sensor. These will be connected in parallel for extended capacity at a nominal 3.0V.

This is your simple three conductor sensor cable with electrode pad wires. These cables measure 24" long and feature a 3.5mm audio jack on one end with snap type receptacles for biomedical sensor pads.

A remote monitoring and control solution, optimised for outdoor environments. Collect real-time data from smart sensors and leverage everything to the edge, in your smart farm management.

This Cable Shield provides a 3.5mm connector where you can connect a three-electrode sensor cable, allowing you to test and use the MyoWare 2.0 muscle sensor without actually connecting it to your person.

The SparkFun Qwiic Cable Kit includes 10 cables of different lengths and styles that will connect your Qwiic boards to each other, to a development platform or to a breadboard. Each Qwiic cable is colour coded red, black, blue and yellow with 1mm JST termination.

SparkFun DataLogger IoT - 9DoF is a pre-programmed data logger to automatically log IMU, GPS and various pressure, humidity and distance sensors - all without having to write a single line of code! DataLogger automatically detects, configures and logs Qwiic sensors. It is specifically designed for users who only need to capture a large amount of data in a CSV or JSON file and return it to their larger project.

Nicla Vision combines a powerful STM32H747AII6 Dual ARM® Cortex® M7/M4 IC processor with a TinyML-enabled 2 MP colour camera, as well as a smart 6-axis motion sensor, integrated microphone and distance sensor. Supports MicroPython, and offers WiFi and Bluetooth® Low Energy connectivity.

Nicla Voice combines a powerful Syntiant® NDP120 Neural Decision Processor™ (NDP), a high-performance IM69D130 microphone, a BMI270 6-axis intelligent motion sensor, a BMM150 3-axis magnetometer and Bluetooth® Low Energy connectivity.

Nicla Sense ME is the smallest Arduino-developed board equipped with a range of the latest Bosch environmental and motion sensors. The module is based on the nRF52832 ARM Cortex M4 chip clocked at 64 MHz with 512 kB of Flash, 64 kB of RAM and 2 MB of SPI Flash and 2 MB of QSPI embedded memory. The Nicla Sense ME features the Bosch BHI260AP, BMP390, BMM150 and BME688 embedded sensors. 

Prototype PCB shield board with screw terminal block for Arduino. A very convenient solution for first experiments with Arduino Mega board. To assemble your projects in a comfortable and tidy way, access to all Arduino Mega2560 pins, universal board area, 5V and Gnd buses, reset button. Shield is supplied assembled.