PLA Set of 20 colors Filament 1.75mm x 5m

It is a very ideal tool when the third hand is required.
Helping Magnifying Hand Tool features:
- Magnifying glass diameter 60mm
- Weight: 0.5kg
- Dimensions: approx. 15 (26) x 17 x 7cm 

Fireproof Insulation Tape PVC Black 25m x 25mm x 0.15mm features:
- PVC insulating tape with adhesive
- Thickness of 0.15 mm
- Measures 25m x 25mm
- Quantity: 1 unit
- Heat resistance: 80°C

Instruction: - The drawing of the polarities is not correct, it is wrong
- Put the batteries in parallel Characteristic: - Cable 15cm long
- Measures 74x42x 20mm
- Weight: 10 gr. (Approx.)
- Stack length max 67mm

Characteristic: - Lithium Battery WITHOUT Protection
- Nominal capacity: 3450mAh (0.2C, discharge of 2.5V)
- Minimum capacity: 3350mAh (0.2C, 2.5V discharge)
- Charging voltage: 4.2 ± 0.05 V
- Nominal voltage: 3.6V
- Charging method: DC-CV (constant voltage with current limited)
- Charging current: standard charge: 1675mA,
- Max. Discharge current: 10A (ambient temperature 25 °)
- Charging time: standard charge: 4 hours,
- Discharge cut-off voltage: 2.5V
- Cell weight: 47g maximum
- Cell dimension: Height: 65.30 mm maximum, Diameter: 18.50 mm maximum

Ideal to control the speed of DC motors.
Characteristic:
- Input voltage: 12-40VDC,
- Max continuous output current: 8A (peak current 10A),
- Control power: 0.01- 400W,
- Dimensions: 60x75x28mm,
- PWM frequency: 13kHz,
- Static current: 0.02 A (Standby),
- Adjustable duty cycle: 10% -100% ,
- It integrates a L7812CV TO-220 regulator,
- It incorporates a 10A fuse to protect the power circuit.
Note that the voltage applied to the motor will be the supply voltage applied to the circuit.

DC Gear Motor N20 200 RPM 12V DIY Robot features:
- Voltage: 12V
- Speed of rotation: 200RPM
- Motor dimensions:
* Diameter 12 mm
* Height 24 mm
- For Arduino, Smart Car, Robotics, Fans, Appliances

The cables are in 10 different colors Flat Cable 1m AWG28 1.27 10 Pins Colors features:
- Length: 100cm
- Model AWG28
- Product name: Flat cable
- Number of conductors: 10
- Conductive material: Copper
- Insulation voltage: 300V - Inner diameter 0.32mm
- Pin Pitch: 1.27mm
- Temperature: 105 ° C

Power Supply Transformer 220V AC/DC 2A 12V features:
- Input voltage: 100~240V 50Hz
- Output voltage: DC 12V
- Output current: 2A
- DC connector: 5.5 mm x 2.1 mm
- Cable length: Approx. 90 cm
- Indicator of operation: LED diode