M12 High Resolution Lens, 12MP, 69.5° FOV, 8mm Focal length, Compatible with Raspberry Pi High Quality Camera M12 M12 High Resolution Lens, 12MP, 69.5° FOV, 8mm Focal length, Compatible with Raspberry Pi High Quality Camera M12. Long Focal Length. Code WV013 Available Price €35.95
SparkFun Pi Servo HAT - Obsolete 16 servo motors with one board seems impossible? With this board not only it isn´t impossible, but it even seems easy. Additionally, you won´t need to sacrifice any of your valuable GPIOs as the HAT connects directly via I2C. Additionally, you have a serial terminal connection at your disposal. You can supply the power to the board through your Pi or directly if you are going for larger servos and would need a separate source of power. Simply scrap a small blob of solder on the isolation jumper. Code SP0016 ✗ Out-of-Stock Price €16.99
M12 High Resolution Lens, 5MP, 20.2° FOV, 25mm Focal length, Compatible with Raspberry Pi High Quality Camera M12 M12 Long Focal Length Lens, 5MP, Long Focal Length 25mm, F1.7 Large Aperture, Compatible with Raspberry Pi High Quality Camera M12 Code WV014 Available Price €22.95
SparkFun Pi AVR Programmer HAT - OBSOLETE You are looking for an easy way to program a microcontroller in your Arduino. It has never been easier - with this board you can do it in the record speed with support or Raspberry (or without for that matter, as the HAT works on the standalone basis as well). It was first developed as an in-house solution for Sparkfun production, and for its quality and usefulness ended up in mass production with a solid fan following. The board includes several handy features ranging from the capacitive touch button for a standalone mode to launch programming, LEDs indicating the status of the program upload as well as some whiteboard labels to keep track of your projects. Code SP0017
SparkFun Qwiic pHAT v2.0 for Raspberry Pi QWIIC is a connection standard developed by Sparkfun enabling a quick an easy connection of peripherals without a need to solder pins, without any mismatches due to polarized connector. And on top of that you can "daisy chain" them! This hat pretty much opens the whole QWIIC universe in front of your Pi. It features 4 QWIIC ports all on the same I2C bus (GND, 3.3V, SDA, and SCL). A universal 2x20 GPIO makes it compatible with all Raspberry Pi boards, as well as Google Coral and Jetson Nano. Note: For a secure connection in some applications, you'll need to add a pair of 1x20 stackable headers to extend the pins to your cart. Code SP0020 Backorder Price €7.99
SparkFun MEMS Microphone Breakout - INMP401 (ADMP401) - obsolete Ever needed a microphone for your project. This tiny little board will fulfill all your needs - it is not only mobile, but as well easy to connect. A low power, efficient, omnidirectional AMP401 microphone has an analog output. It works great for near and long range uses and is particularly suitable for a mobile projects given its extremely low energy consumption. You can use it in a range of applications - we can see it used in smartphones, cameras or electronic nannies. Code SP021
2 Channel Relay Module 5V 10A for Arduino 2 Channel Relay Module 5V 10A for Arduino features:- 5V relay module with 2 optocoupled channels- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)- Channels: 2 (independent protected with Optocouplers)- Supply voltage: 5V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- LED indicator: For each channel- Dimensions: 40x 50mm Code RL006 Available Regular price €1.99 -€0.35 Price €1.64
SparkFun Qwiic HAT for Raspberry Pi The Qwiic HAT is an absolute basic of Qwiic system for Raspberry. It enables a quick and efficient connection of an sensor to your Raspberry over I2C bus (GND, 3.3 V, SDA and SCL). As Qwiic enables daisy chaining of components, you can pretty much install as many sensors on the Qwiic HAT as you want. On top of that it fits perfectly Pi Tin enclosure from SparkFun enabling connection while in case. Code SP031 Available Price €7.99
Capacitive Fingerprint Scanner - UART (AD-013) - OBSOLETE This fingeprint scanner from ADH-Tech combines a highly precise fingerprint sensor module with an onboard MCU and UART interface enabling trivially very connection to any project. The scanner independently reads and analyses the fingerprint thanks to an MCU algorithm that can send a converted digital signal to a peripheral serial interface for a data read. The onboard MCU algorithm enables operations such as for example a fingerprint enroll. Code SP036
SparkFun XBee Explorer Dongle SparkFun XBee Explorer Dongle enables the communication between your computer and any XBee device, as in case of any XBee device, without any cables! The module is compatible with Series 1, Series 2.5 and standard Pro version with voltage regulator functioning with the current up to 500 mA. Code SP038 Last items in stock Price €34.99
SparkFun XBee Explorer Dongle SparkFun XBee Explorer Dongle enables the communication between your computer and any XBee device, as in case of any XBee device, without any cables! The module is compatible with Series 1, Series 2.5 and standard Pro version with voltage regulator functioning with the current up to 500 mA. Code SP039 Last items in stock Price €33.99
Kingston Class 10 MicroSD 8GB Memory Card Kingston Class 10 MicroSD 8GB Memory Card features: - SDHC Class 10 UHS-I (SDC10G2 / 8GBSP) for Raspberry - Capacity: 8Gb - Class: 10 - MicroSD dimensions 11mm x 15mm x 1mm - FAT32 format - Service temperature -25 ° C to 85 ° C - Storage temperature -40 ° C to 85 ° C - Voltage 3.3V Code V0010 ✗ Out-of-Stock Price €6.95
Kit Seeed Grove 20 sensors for Arduino The kit includes 20 basic sensors, which will help you to easily kick-start any project. The sensors are featured with a proprietary Seeed Grove connectors enabling easy connection without soldering and a comprehensive guide book with exemplary classes. Code SS001 Last items in stock Price €67.95
Toshiba Class 10 16GB MicroSD Memory Card Toshiba Class 10 16GB MicroSD Memory Card features: - Capacity 16GB - Class 10 - Dimensions of the microSD 11 mm x 15 mm x 1 mm - FAT32 format - Operating temperature -25 ° C to 85 ° C - Storage temperature -40 ° C to 85 ° C - Voltage 3.3 Code V0011 Backorder Price €7.90
Kit Seeed Grove 30 sensors for Arduino The kit includes 30 basic sensors, which will help you to easily kick-start any project. The sensors are featured with a proprietary Seeed Grove connectors enabling easy connection without soldering and a comprehensive guide book with exemplary classes. Code SS002 Last items in stock Price €95.59
Kit Seeed Grove 40 sensors for Arduino The kit includes 40 basic sensors, which will help you to easily kick-start any project. The sensors are featured with a proprietary Seeed Grove connectors enabling easy connection without soldering and a comprehensive guide book with exemplary classes. Code SS003 Last items in stock Price €109.90
Kit Seeed Grove Arduino Starter Seeed Grove Arduino Starter kit is a game-changer for schools and robotic classes. You get a set of 10 sensors with a Arduino compatible board and 12 classes for only 28.99 EUR! Code SS004 Available Price €35.90
Seeed Grove Inventor Kit for micro:bit The Grove inventor kit is a great extension set for your micro:bit. By using Grove shield for micro:bit you are able to connect all the modules included in the pack purely by the Grove connectors with no need to solder or wire any parts. Now you can focus only on programing with your great mirco:bit. Code SS005 Available Regular price €69.90 -€20.00 Price €49.90
3.5 inch LCD TFT Acrylic Case for Raspberry Pi Plastic box compatible with Raspberry Pi B +, Raspberry Pi 2 and 3. Perfect to protect your Pi. It is perfectly mechanized to give access to all the ports of the Raspberry. Intended for use with a 3.5-inch screen, reference in our store: RA020 3.5 inch LCD TFT Acrylic Case Code RA018 Available Regular price €4.40 -25% Price €3.30
Seeed Grove Base kit for Raspberry Pi The Grove Base Kit for Raspberry is all you need to start playing and making with your Raspberry Pi board. It is compatible with boards Pi 3 and Pi 4 and includes 8 basic sensors, a display and a motor. All of that on the grove connectors making it a seamless experience. Code SS006 Last items in stock Regular price €65.99 -€6.00 Price €59.99
Seeed Respeaker 6/Mic Circular Array Kit for Raspberry Pi With this small module, you can integrate your Raspberry with Amazon Alexa voice module or Google Assistant. It has never before been so easy. Get a chance to experience challenges of the newest technological developments in AI and smart home technologies. Code SS007 Backorder Price €59.99
Kit 2x Adhesive Dissipaters of Covers and Blue Aluminium For Raspberry Pi 2 and Pi 3, B and B +. Each heatsink includes thermal sticker. Characteristic: 1 cover sink: - Dimensions: 13x12x5mm 1 blue aluminum sink: - Dimensions: 9x9x12mm Code RA021 Available Price €2.49
Kit of 28 Sensors with shield for BBC micro: bit The 28 sensor kit is a great extension kit for your micro: bit. Using Sensor shield for micro: bit you can connect all the modules included in the pack only by the connectors without the need to solder or wire any part. Now you can just concentrate on programming with your big mirco: bit. Code B0076 ✗ Out-of-Stock Price €55.49
Kit 2x Blue Aluminium and Gold flat metal heatsinks For Raspberry Pi 2 and Pi 3, B and B +. Each heatsink includes thermal sticker. Kit 2x Blue Aluminium and Gold flat metal heatsinks features: 1 blue aluminum heatsink: - Dimensions: 9x9x12mm 1 flat metal sink gold color: - Dimensions: 12x12x1mm Code RA022 Available Price €1.49
2-DOF Pan-Tilt HAT for Raspberry Pi - tilt camera holder HAT kit with 2 DOF turn & tilt stand designed for Raspberry Pi. Includes the integrated PWM chip PCA9685 that allows RPi to control camera movement, and the TSL25911FN ambient light sensor that detects light intensity through the I2C interface. Code RA098 Available Regular price €25.99 -€3.00 Price €22.99