Raspberry Pi 3

Camera module for Arduino, Raspberry Pi 2 and Pi 3, B and B +. VGA camera 640x480 OV7670 B 0.3MPx 30fps Cmos features:
> - Input voltage 2.5V-3V
- Operating power 60mW / 15fps VGA YUV
- Resolution VGA 640x480 pixels (30fps)
- Maximum frame rate 30fps VGA
- Flicker 50Hz / 60Hz automatic detection
- Lens size 1/6 "
- Angle of view 25 °
- Sensitivity 1.3V / (lux- seg)
- SCCB (Serial Camera Control Bus) interface
- Output format · 8 Bits
- YUV / YCbCr 4: 2: 2
- RGB 565/555/444
- GRB 4: 2: 2
- RAW RGB data
- High sensitivity Light operation
- Automatic adjustment
- Color level saturation - Edge enhancement
- Noise level

The Raspberry Pi 3 Model B+ is the penultimate product in the Raspberry Pi 3 range. It is the significant evolution in board performance compared to Raspberry Pi 3 B with the increase in processor frequency from 1.2 GHz to 1.4 GHz. Compared to serial 2 the board offers standard 802.11 b-g-n and bluetooth BLE 4.1 connectivity.

Camera module for Arduino, Raspberry Pi 2 and Pi 3, B and B +.
AL422B Video buffer consists of 3M-bits of DRAM, and it is configured as 393.216 x 8 bit FIFO (First In First Out). The interface is very easy to use because all operations are controlled by the internal DRAM memory controller. VGA Camera 640x480 FIFO AL422 Buffer OV7670 30fps features:
- Input voltage: 2.5V-3V
- Controller: AL422B FIFO buffer
- Operating power: 60mW / 15fps VGA YUV
- VGA resolution: 640x480 pixels (30fps),
- Maximum frame rate: 30fps VGA
- Flicker: 50Hz / 60Hz auto detection
- Lens size: 1/6 "
- Angle of view: 25 ° - Sensitivity: 1.3V / (lux- sec)
- SCCB (Serial Camera Control Bus) interface
- Output format: 8 Bits
- YUV />

The Raspberry Pi 3 Model A + extends the Raspberry Pi 3 range to the A + board format.

• - Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit 1.4 GHz SoC
• - 512MB LPDDR2 SDRAM
• - 2.4GHz and 5GHz IEEE 802.11.b / g / n / ac Wireless LAN, Bluetooth 4.2 / BLE
• - Extended 40-pin GPIO header
• - HDMI full size
• - Individual USB 2.0 ports
• - CSI camera port to connect a Raspberry Pi camera module
• - DSI display port to connect a Raspberry Pi Touch display
• - 4-pole stereo output and composite video port.
• - Micro SD port for charging your operating system and storing data.
• - 5V / 2.5A direct current input. Hardware Specifications:

The Raspberry Pi 3 Model B is the third generation product in the Raspberry Pi range. The module was revolutionary for introducing the integrated WiFi and bluetooth connection which is still impressive for its quality. In addition, it introduced a processor upgrade to 1.2 GHz.

HD V2 Raspberry Pi camera board The Raspberry Pi High Definition (HD) camera board connects to any Raspberry Pi or Compute Module to create HD photos and video.
Uses Sony's IMX219PQ image sensor that offers high-speed, high-speed video images Sensitivity.
Raspberry Pi Camera Module offers reduced image contamination such as fixed pattern noise and smudges. It also has automatic control functions such as exposure control, white balance and luminance detection.
Raspberry Pi Camera Board, Sony IMX219 8 Megapixel Sensor features:
High-quality images
High data capacity
Fixed 8 megapixel focus (includes focus adjustment tool)
Compatible with 1080p, 720p60 and VGA90
Sony IMX219PQ CMOS image sensor
15-pin ribbon cable

Raspberry Pi 3 B + module and 16GB micro SD card preloaded with NOOBS operating system.

• Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
• 1GB LPDDR2 SDRAM
• 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN
• Bluetooth 4.2, BLE Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)
• Extended 40-pin GPIO header
• Full-size HDMI 4 USB 2.0 ports
• CSI camera port for connecting a Raspberry Pi camera
• DSI display port for connecting a Raspberry Pi touchscreen display
• 4-pole stereo output and composite video port Micro SD port for loading your operating system and storing data
• 5V/2.5A DC power input Power-over-Ethernet (PoE) support (requires separate PoE HAT) 

Raspberry Pi HD Pi NoIR V2 camera board Raspberry Pi HD Pi NoIR camera board connects to any Raspberry Pi or Compute Module to create HD photos and video. The Pi NoIR (without infrared) is the same as the standard camera module but without an infrared filter. Therefore, it is excellent for photography and video in the dark.
The module uses Sony's IMX219PQ image sensor that offers high-speed, high-sensitivity video images.
The Pi NoIR module offers contamination from Reduced image such as fixed pattern noise and smudges. It also has automatic control functions such as exposure control, white balance and luminance detection. Raspberry Pi NoIR Camera Board, Sony IMX219 8 Megapixel Sensor features:
and benefits: No infrared filter
High quality images

The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range. Característica: Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @>

Impressive, professional, high-definition camera module. Official product of Raspberry Pi.

The official Raspberry Pi HQ Camera includes a 1/3" (8.5mm) Sony IMX477 sensor with 12.3MPx resolution and up to 50% increased sensitivity of pixels per area, offering greater sensitivity to light.

It is specially designed to work with CS or C-mount interchangeable lenses (CS-C adapter included). It allows you to use both fixed and varifocal lenses, and you can also use other lenses such as M12 lenses by using an M12 to CS mount converter.

The Raspberry Pi High Definition (HD) camera board connects to any Raspberry Pi or Compute Module to create HD photos and video.

16mm fixed lens compatible with Raspberry Pi official HQ Camera (Reference RA094) C-mount, long distance telephoto type (up to 40m) 10 Mpx.

The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range. Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @>

M12 high resolution lens, 16MP, 105° FOV, 3.56mm focal length, Raspberry Pi HQ camera M12 compatible.

M12 High Resolution Lens, 14MP, 184.6° Ultra wide angle, 2.72mm Focal length, Compatible with Raspberry Pi High Quality Camera M12.

The Starter kit does not contain Raspberry PI. The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range. Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @>

M12 High Resolution Lens, 12MP, 160° FOV, 3.2mm Focal length, Compatible with Raspberry Pi High Quality Camera M12

M12 M12 High Resolution Lens, 12MP, 113° FOV, 2.7mm Focal length, Compatible with Raspberry Pi High Quality Camera M12. No distortion.

 M12 High Resolution Lens, 12MP, 69.5° FOV, 8mm Focal length, Compatible with Raspberry Pi High Quality Camera M12. Long Focal Length.

M12 Long Focal Length Lens, 5MP, Long Focal Length 25mm, F1.7 Large Aperture, Compatible with Raspberry Pi High Quality Camera M12