Edup Mini Dongle WiFi USB For pcDuino 3 Nano Raspberry Pi Edup Mini Dongle WiFi USB For pcDuino 3 Nano Raspberry Pi features: - Interface type: USB - Supports IEEE 802.11e draft 802.11n - Supports USB 2.0, compatible with USB 1.1 and 1.2 - Support systems: - Win2k / XP / Vista / Win7 / Win8.1 / Win10 / Mac / Linux - Operating distance: 91 meters indoors, 275 meters in open space - Transfer rate: 150Mbps (downlink) and 150Mbps (uplink) - Works with old Wireless-G and Wireless-B networks - WEP and WPA encryption - 64-bit / 128-bit WEP (Wired Equivalent Privacy), TKIP, AES 2,400GHz ISM - Frequency range: 2.4 to 2.4835 GHz - Operating channels: 13 - Support network protocol: CSMA / CA with acknowledgment - Transmission mode: DSSS Code RA015 Available Regular price €8.49 -€2.00 Price €6.49
Push button 6x6x5mm 2pins Push button 6x6x4mm features: -Touch Push Tact Switch mini electronic Arduino push button -Measures: 6x6x45mm -Quantity: 1 unit Code K0269 Available Price €0.24
Arduino compatible UNO R3 board - It has an Atmega328P chip running at 16Mhz with a factory loaded bootloader - The Uno R3 module has all the connectors than the Arduino Uno R3 and is compatible with all Arduino shields Arduino compatible UNO R3 board features: - Includes USB Cable - ATmega328P 16MHz chip with external quartz crystal - Microprocessor: ATmega328 - Operating voltage: 5V - Input voltage (recommended): 7-12V - Input voltage (limits): 6-20V - Clock speed: 16 MHz - Digital I / O Pins: 14 - Analog input pins: 6 - DC current per I / O Pin: 40 mA - DC Current per Pin 3.3V: 50 mA - Flash32 KB of which 0.5 KB are used by the bootloader - Atmega328 - SRAM 2 KB - Atmega328 Code B0009 Available Price €9.95
Arduino Nano 33 Iot Nano 33 IoT as the name would suggest is an WiFi enabled version of the famous Nano. It has an upgraded microcontroller to ARM Cortex SAMD21 y el módulo NINA-W10 (based on ESP32) from u-blox and a module IMU LSM6DS3. Code BAR32 Available Price €26.99
BMP280 Temperature Barometric Pressure Sensor Module/SPI This module includes the BMP280 component that converts atmospheric pressure, temperature and humidity with high precision into a digital signal.The equipment uses the two I2C and SPI interfaces. The very good measurements made by the BMP280 allows the module to be used as an altimeter.Its 5-pin straight connector allows easy connection to other electronic boards. BMP280 Temperature Barometric Pressure Sensor Module/SPI features: - Interfaces: -I2C (up to 3.4 MHz) -SPI (up to 10 MHz)- Supply voltage: 1.8-5VDC- Module operating range: - Temperature: -40ºC to + 85ºC0-100% - Pressure: 300-1100 hPa- Resolution of the measures: - Temperature: 0.01ºC Code M0134 Available Regular price €4.99 -€1.00 Price €3.99
Sonoff 4CH PRO R3 Sonoff 4CH is a 4 channel WiFi switch allowing control of 4 devices at the same time. It is a very similar device as Sonoff Basic, nonetheless extending Basic's functionality to more than 1 device. The devices can be controlled either by switches as provided on the 4CH box or by eWeLink application as with any other Sonoff product Code WS005 ✗ Out-of-Stock Regular price €36.99 -€3.00 Price €33.99
Vertical Slide Switch 3P2T 50V 0.5A 6 DIP pins and 2 positions DPDT. This switch is widely used to control the operation of many small electronic power projects, including volume and other controls for audio video, dimmer controls for lights.It is also a great component for DIY. Vertical Slide Switch 3P2T 50V 0.5A features: - Type: 3P2T- Contact resistance: 30 MΩ max.- Insulation resistance: 100 MΩ- Maximum operating voltage: 50V- Maximum operating current: 0.5A- Can support 500 VAC for 1 minute- Step between pins: 2.54mm / 0.1 "- Pin size: 4.5x0.5x15 / 0.77 "x0.19"- Type of current: DC- Pins to be welded- Switch action: 2 ON / OFF positions- Shape of interrupter: rectangular- Size: 16x6.5x15 / 0.2 "x0.02" Code K0188 Available Price €0.48
200Pcs TO-92 NPN PNP Bipolar Silicon Transistor 10 Value Assortment Kit Transistor kit, 200pcs of PNP+NPN TO-92 Bipolar Transistor in a box. BC337, BC327, 2N2222, 2N907, 2N3904, 2N3906, S8050, S8550, A1015, C1815. Well packed and assorted in a plastic storage case. It's a great choice for your electronic projects. Code T0079 Backorder Price €5.50
Servo with Rotation 180 Servo Motor Type S3003 Servo with Rotation 180 Servo Motor Type S3003 features: - Model Aircraft Futaba Arduino Robotics - Operating Voltage: 4.8V to 6V - Max Torque: 4.1kg / cm (6V) - Operating speed: 0.23sec / 60 degrees (4.8V), 0.19sec / 60 degrees (6V) - Max radius: 180º - Temperature range: -20 + 60 C degrees - Weight: 38 g - Cable length: 26cm - Dimensions: 40.5 x39x 20 mm - Servo connector: JR - Chinese manufacturing Code R0018 Available Regular price €6.29 -€0.30 Price €5.99
Servos Tester Servos Tester features: - 3-Channel Tester - For Electronica Arduino Code R0029 Available Regular price €2.79 -€1.00 Price €1.79
Tilt Camera Platform Anti-Vibration Camera Mount for Aircraft FPV Tilt Camera Platform Anti-Vibration Camera Mount for Aircraft FPV features:- Platform for Arduino Robotics Modeling, works with servo 9g SG90- Servos not included Code R0022 Available Regular price €2.15 -€0.20 Price €1.95
Micro Servo Compatible with MG90S Micro Servo Compatible with MG90S features: - Operating voltage: 4.8Vdc (5V) or 6Vdc - Torque: 1.80 kg / cm at 4.8V and 2.20kg / cm at 6V - Speed: 0.1seconds / 60º at 4.8V and 0.8 seconds / 60º at 6V - Gear type: metallic - Turning width: 180º - Temperature working: from -30 to 60 ºC - 3 plastic propellers / arms - Fixing screws - Size: 22.6 x 11.8 x 31 mm - Weight: 13.4 gr Code R0015 Available Price €3.99
PCA9685 digital servo motor controller 16 channel PWM This module can handle 16 PWM signals, through an I2C connection with devices like microcontrollers or development boards like Arduinos. It can also be concatenated with other equal modules (up to 62 cards), increasing versatility and allowing you to obtain up to 992 PWM outputs that can be used to connect servo motors or LEDs to change the brightness intensity. PCA9685 digital servo motor controller 16 channel PWM features: - Supply voltage: 3-5 VDC, - Maximum motor voltage: 6 VDC, - Number of channels: 16, - Resolution per channel: 12 bits, - Interface: I2C, - Working frequencies: 40-1000 Hz, - PCB size: 62.3x25.3mm . Code R0074 Available Price €5.10
Servo Extension Lead Wire Cable 300mm JR Futaba Servo Extension Lead Wire Cable 300mm JR Futaba features:- Cable length: 300mm Code R0023 ✗ Out-of-Stock Price €1.75
Servo 9g SG92r 2.5kg 9g digital servo new version of SG90. POM with Carbon fiber gears set and control arms are more durable use than SG90 nylon gear and more torque. It is a good choice for park size 3D models , high speed jets and R/C airplane 250 450 RC helicopter Servo 9g SG92r 2.5kg features: Weight: 9g Operating voltage: 4.8v Stall torque: 2.5kg /cm(4.8v) Gear type: POM with carbon fiber Operating speed: 0.1sec /60degree (4.8v) Temperature range: 0„ƒ_ 55„ƒ Dead band width:1us servo wire length: 25 cm Servo Plug: JR (Fits JR and Futaba) servo arms &screws included and fit with Futaba servo arm Code R0079 Available Price €4.30
Servo Extension Lead Wire Cable 200mm JR Futaba Servo Extension Lead Wire Cable 200mm JR Futaba features:- Cable length: 200mm Code R0073 Available Price €1.49
25T metal disc for MG996R servomotors + 4 screws Metal disc diameter 25mm with 4 mounting holes for 25T RC MG996R servos 25T metal disc for MG996R servomotors + 4 screws features: - Material: Aluminum - Gear teeth: 25T - 4x M3 mounting holes rotated - Diameter disc: 25mm - Includes: 4 fixing screws. Code R0076 Available Price €0.90
Tower Pro Micro Servo 9g SG90 360 degree Tower Pro Micro Servo 9g SG90 360 degree features: - Operating voltage: 3.0-7.2V- Speed (4.8V without load): 0.12sec / 60 degrees- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)- Working temperature: -30 to +60 degrees C- Cable length: approx. 23cm- Includes photo accessories and screws- Dimensions: 22x11.5x27mm Code R0075 Available Price €2.95
Servo with Rotation 180 Servo Motor Type S3003 Servo with Rotation 180 Servo Motor Type S3003 features: - Model Aircraft Futaba Arduino Robotics - Operating Voltage: 4.8V to 6V - Max Torque: 4.1kg / cm (6V) - Operating speed: 0.23sec / 60 degrees (4.8V), 0.19sec / 60 degrees (6V) - Max radius: 180º - Temperature range: -20 + 60 C degrees - Weight: 38 g - Cable length: 26cm - Dimensions: 40.5 x39x 20 mm - Servo connector: JR - Chinese manufacturing Code R0018 Available Regular price €6.29 -€0.30 Price €5.99
Servos Tester Servos Tester features: - 3-Channel Tester - For Electronica Arduino Code R0029 Available Regular price €2.79 -€1.00 Price €1.79
Tilt Camera Platform Anti-Vibration Camera Mount for Aircraft FPV Tilt Camera Platform Anti-Vibration Camera Mount for Aircraft FPV features:- Platform for Arduino Robotics Modeling, works with servo 9g SG90- Servos not included Code R0022 Available Regular price €2.15 -€0.20 Price €1.95
Micro Servo Compatible with MG90S Micro Servo Compatible with MG90S features: - Operating voltage: 4.8Vdc (5V) or 6Vdc - Torque: 1.80 kg / cm at 4.8V and 2.20kg / cm at 6V - Speed: 0.1seconds / 60º at 4.8V and 0.8 seconds / 60º at 6V - Gear type: metallic - Turning width: 180º - Temperature working: from -30 to 60 ºC - 3 plastic propellers / arms - Fixing screws - Size: 22.6 x 11.8 x 31 mm - Weight: 13.4 gr Code R0015 Available Price €3.99
PCA9685 digital servo motor controller 16 channel PWM This module can handle 16 PWM signals, through an I2C connection with devices like microcontrollers or development boards like Arduinos. It can also be concatenated with other equal modules (up to 62 cards), increasing versatility and allowing you to obtain up to 992 PWM outputs that can be used to connect servo motors or LEDs to change the brightness intensity. PCA9685 digital servo motor controller 16 channel PWM features: - Supply voltage: 3-5 VDC, - Maximum motor voltage: 6 VDC, - Number of channels: 16, - Resolution per channel: 12 bits, - Interface: I2C, - Working frequencies: 40-1000 Hz, - PCB size: 62.3x25.3mm . Code R0074 Available Price €5.10
Servo Extension Lead Wire Cable 300mm JR Futaba Servo Extension Lead Wire Cable 300mm JR Futaba features:- Cable length: 300mm Code R0023 ✗ Out-of-Stock Price €1.75
Servo 9g SG92r 2.5kg 9g digital servo new version of SG90. POM with Carbon fiber gears set and control arms are more durable use than SG90 nylon gear and more torque. It is a good choice for park size 3D models , high speed jets and R/C airplane 250 450 RC helicopter Servo 9g SG92r 2.5kg features: Weight: 9g Operating voltage: 4.8v Stall torque: 2.5kg /cm(4.8v) Gear type: POM with carbon fiber Operating speed: 0.1sec /60degree (4.8v) Temperature range: 0„ƒ_ 55„ƒ Dead band width:1us servo wire length: 25 cm Servo Plug: JR (Fits JR and Futaba) servo arms &screws included and fit with Futaba servo arm Code R0079 Available Price €4.30
Servo Extension Lead Wire Cable 200mm JR Futaba Servo Extension Lead Wire Cable 200mm JR Futaba features:- Cable length: 200mm Code R0073 Available Price €1.49
25T metal disc for MG996R servomotors + 4 screws Metal disc diameter 25mm with 4 mounting holes for 25T RC MG996R servos 25T metal disc for MG996R servomotors + 4 screws features: - Material: Aluminum - Gear teeth: 25T - 4x M3 mounting holes rotated - Diameter disc: 25mm - Includes: 4 fixing screws. Code R0076 Available Price €0.90
Tower Pro Micro Servo 9g SG90 360 degree Tower Pro Micro Servo 9g SG90 360 degree features: - Operating voltage: 3.0-7.2V- Speed (4.8V without load): 0.12sec / 60 degrees- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)- Working temperature: -30 to +60 degrees C- Cable length: approx. 23cm- Includes photo accessories and screws- Dimensions: 22x11.5x27mm Code R0075 Available Price €2.95