Batteries

Lithium Battery 3V CR2032 Button with PCB Pins features:
- 3V battery for horizontal mounting PCB printed circuit
- Quantity: 1 unit
- Diameter: 20mm
- Voltage: 3V
- Capacity: 220mAh

Battery 9V/E Block Varta Industrial 4022 6F22 6LR61 580mAh features:
- 9V Varta Industrial 6F22 Battery
- High quality, made in Germany
- Quantity: 1 unit

Battery Varta Industrial AA - 4006 LR06 Mignon 1,5V- pack 4unds features:
- 1.5V Varta Industrial LR06 Battery
- High quality, made in Germany
- Quantity: 4 units

Battery charger for 12V gel batteries with battery state of charge monitoring. Alligator clip connectors.

Battery charger for 12V gel batteries with battery state of charge monitoring. Alligator clip connectors.

LITHIUM POLYMER BATTERY Battery LIPO 180mAh 3.7V features:
-Battery type-lithium polymer. -Type of battery terminals- 3 wires. -Voltage of the battery-3.7 V -Capacity of the battery- 180 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit Dimensions: -Length / depth of the battery- 20 mm -Battery width / diameter -31 mm It has three cables with a 3-pin connector with a separation of 2 mm. Wires: Red: positive. Black: negative. Yellow: thermistor output. The technical file: Battery LIPO.pdf

The Konnwei KW510 is an advanced multi-function device that uses state-of-the-art technology to allow you to easily, quickly and accurately measure the actual cold start capability, battery condition and common faults in the vehicle's starting and charging systems. The KW510 is particularly useful for workshops as it can accurately detect the problem, allowing the vehicle to be repaired quickly.

Konnwei's KW870 car battery tester is capable of effectively analysing and reading important car data such as voltage, internal resistance, cold start current and AH capacity. In addition, the device calculates cold-start capacity and the degree of ageing, allowing for faster and more accurate repairs. Whether you're a beginner or an expert, this car battery diagnostic device can be used with a wide range of 6-18 V batteries with a capacity of 100-2000 CCA, including traditional, flat AGM, spiral AGM and gel batteries.

Lithium polymer battery 3.7 V with the capacity of 590 mAh. Includes PCM safety chip (protection against overcharge, over-discharge, short circuit).

Battery terminal type-3 wires.

Battery voltage-3.7 V

Battery capacity- 590 mAh.

Nickel strip in the shape of a square plate to join 4 poles of 4 welded batteries with connection projection. Tape sheets, lithium battery welding.

Nickel tape to join the battery poles welded with connection projection. A roll of 1kg / 260m.

Nickel tape to join the battery poles welded with connection projection. A roll of 1kg / 105m.

20 meter wide shrink film for one 18650 stack to wrap

20 meter wide shrink film for two 18650 stack to wrap

Single sheet of two 18650 stack width shrink film for wrapping.

Pre-cut insulating base for electrode, base without holes for 2x 18650 batteries. Self-adhesive pad isolates and protects battery contacts from short circuits. Stick to the battery after sealing it in a package.

Pre-cut insulating base for electrode, base without holes for 3x 18650 batteries. Self-adhesive pad isolates and protects battery contacts from short circuits. Stick to the battery after sealing it in a package.

Pre-cut insulating base for electrode, base without holes for 5x 18650 batteries. Self-adhesive pad isolates and protects battery contacts from short circuits. Stick to the battery after sealing it in a package.

Pre-cut insulating base for electrode, base without holes for 4x 18650 batteries. Self-adhesive pad isolates and protects battery contacts from short circuits. Stick to the battery after sealing it in a package.

Pre-cut insulating base for electrode, base without holes for 8x 18650 batteries. Self-adhesive pad isolates and protects battery contacts from short circuits. Stick to the battery after sealing it in a package.

Pre-cut insulating base for electrode, base with holes for 2x 18650 batteries. Self-adhesive pad isolates and protects battery contacts from short circuits. Stick to the battery after sealing it in a package. If the connecting tape becomes hot, insulation protects the battery against damage to the casing and against short circuits.

Pre-cut insulating base for electrode, base with holes for 4x 18650 batteries. Self-adhesive pad isolates and protects battery contacts from short circuits. Stick to the battery after sealing it in a package. If the connecting tape becomes hot, insulation protects the battery against damage to the casing and against short circuits.

Pre-cut insulating base for electrode, base with holes for 4x 18650 batteries. Self-adhesive pad isolates and protects battery contacts from short circuits. Stick to the battery after sealing it in a package. If the connecting tape becomes hot, insulation protects the battery against damage to the casing and against short circuits.

Pre-cut insulating base for electrode, base with holes for 5x 18650 batteries. Self-adhesive pad isolates and protects battery contacts from short circuits. Stick to the battery after sealing it in a package. If the connecting tape becomes hot, insulation protects the battery against damage to the casing and against short circuits.

The 12V gel battery with the capacity of 4,5Ahs. It maintains the capacity after 3 months of storage at 91%. Long life, both in cyclic and buffer operation. No delamination effect of the gelled electrolyte. Tolerates high operating temperatures well. Completely recovers to its original capacity after a deep discharge.

LITHIUM POLYMER BATTERY Battery LIPO 2750mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 2600mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 3900mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 3400mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 2450mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 3350mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 4800mAh 3.7V

The 12V gel battery with the capacity of 3,4Ahs. It maintains the capacity after 3 months of storage at 91%. Long life, both in cyclic and buffer operation. No delamination effect of the gelled electrolyte. Tolerates high operating temperatures well. Completely recovers to its original capacity after a deep discharge.

The 12V gel battery with the capacity of 10Ahs. It maintains the capacity after 3 months of storage at 91%. Long life, both in cyclic and buffer operation. No delamination effect of the gelled electrolyte. Tolerates high operating temperatures well. Completely recovers to its original capacity after a deep discharge.

The 12V gel battery with the capacity of 5Ahs. Manufactured using AGM (Absorbent Glass Mat) technology. It maintains the capacity after 3 months of storage at 91%. Long life, both in cyclic and buffer operation. No delamination effect of the gelled electrolyte. Tolerates high operating temperatures well. Completely recovers to its original capacity after a deep discharge.