Expansion Board GPIO Shield 40 Raspberry Pi B+ Pin Expansion Board GPIO Shield 40 Raspberry Pi B+ Pin features: - Shield module for Raspberry Pi 2 and Pi 3, B and B + Code RA013 Available Price €6.85
SparkFun Pi Servo HAT - Obsolete 16 servo motors with one board seems impossible? With this board not only it isn´t impossible, but it even seems easy. Additionally, you won´t need to sacrifice any of your valuable GPIOs as the HAT connects directly via I2C. Additionally, you have a serial terminal connection at your disposal. You can supply the power to the board through your Pi or directly if you are going for larger servos and would need a separate source of power. Simply scrap a small blob of solder on the isolation jumper. Code SP0016 ✗ Out-of-Stock Price €16.99
SparkFun Pi AVR Programmer HAT - OBSOLETE You are looking for an easy way to program a microcontroller in your Arduino. It has never been easier - with this board you can do it in the record speed with support or Raspberry (or without for that matter, as the HAT works on the standalone basis as well). It was first developed as an in-house solution for Sparkfun production, and for its quality and usefulness ended up in mass production with a solid fan following. The board includes several handy features ranging from the capacitive touch button for a standalone mode to launch programming, LEDs indicating the status of the program upload as well as some whiteboard labels to keep track of your projects. Code SP0017
SparkFun Qwiic pHAT v2.0 for Raspberry Pi QWIIC is a connection standard developed by Sparkfun enabling a quick an easy connection of peripherals without a need to solder pins, without any mismatches due to polarized connector. And on top of that you can "daisy chain" them! This hat pretty much opens the whole QWIIC universe in front of your Pi. It features 4 QWIIC ports all on the same I2C bus (GND, 3.3V, SDA, and SCL). A universal 2x20 GPIO makes it compatible with all Raspberry Pi boards, as well as Google Coral and Jetson Nano. Note: For a secure connection in some applications, you'll need to add a pair of 1x20 stackable headers to extend the pins to your cart. Code SP0020 Backorder Price €7.99
T-Cobbler Protoboard Extension Plate GPIO 40 Raspberry PI B+ Pin T-Cobbler Protoboard Extension Plate GPIO 40 Raspberry PI B+ Pin features: - Shield expansion module for Raspberry Pi 2 and Pi 3, B and B + - Dimension: 6 x 7.3x 1.9mm Code RA004 Available Price €2.99
2 Channel Relay Module 5V 10A for Arduino 2 Channel Relay Module 5V 10A for Arduino features:- 5V relay module with 2 optocoupled channels- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)- Channels: 2 (independent protected with Optocouplers)- Supply voltage: 5V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- LED indicator: For each channel- Dimensions: 40x 50mm Code RL006 Available Regular price €1.99 -€0.35 Price €1.64
Edup Mini Dongle WiFi USB For pcDuino 3 Nano Raspberry Pi Edup Mini Dongle WiFi USB For pcDuino 3 Nano Raspberry Pi features: - Interface type: USB - Supports IEEE 802.11e draft 802.11n - Supports USB 2.0, compatible with USB 1.1 and 1.2 - Support systems: - Win2k / XP / Vista / Win7 / Win8.1 / Win10 / Mac / Linux - Operating distance: 91 meters indoors, 275 meters in open space - Transfer rate: 150Mbps (downlink) and 150Mbps (uplink) - Works with old Wireless-G and Wireless-B networks - WEP and WPA encryption - 64-bit / 128-bit WEP (Wired Equivalent Privacy), TKIP, AES 2,400GHz ISM - Frequency range: 2.4 to 2.4835 GHz - Operating channels: 13 - Support network protocol: CSMA / CA with acknowledgment - Transmission mode: DSSS Code RA015 Available Regular price €8.49 -€2.00 Price €6.49
Raspberry Pi 2-3 Model B Multifunction Expansion GPIO Module This module is used to extend the Raspberry's 40 GPIO pins to another set of 2x20 male pins and 8 parallel pins accessible on the terminal blocks in the that test leads are pushed. The electronic board offers great reliability with the Raspberry and is very easy to connect thanks to its existing suitable accessories but not included. The module offers a set of mini jumpers to configure the GPIO. Code RA016 Available Price €7.95
Raspberry Pi Sense HAT Sense HAT is your absolute classic used for a well-known and popular Astro Pi projects. It features set of sensors (Pressure, humidity, IMU and temperature) and a great 8x8 LED screen. It is a full set for your Raspberry - you can both measure your projects environment, display it on the screen as well as manouver and input data with joystick and buttons included on the HAT. Code RA999 Available Price €46.99
SparkFun MEMS Microphone Breakout - INMP401 (ADMP401) - obsolete Ever needed a microphone for your project. This tiny little board will fulfill all your needs - it is not only mobile, but as well easy to connect. A low power, efficient, omnidirectional AMP401 microphone has an analog output. It works great for near and long range uses and is particularly suitable for a mobile projects given its extremely low energy consumption. You can use it in a range of applications - we can see it used in smartphones, cameras or electronic nannies. Code SP021
SparkFun Pulse Oximeter and Heart Rate Sensor - MAX30101 & MAX32664 (Qwiic) This tiny little board features two chips from Maxim Integrated: MAX32664 and MAX30101. The 30101 Oximetry module is the sensor on board responding for both oximetry and heart rate sesnsing. The MAX32664 is equipped with a Cortex M4 handling algorithimc calculations, digital filtering and automatic gain control. The board comes with I2C and SparkFun has provided to it Qwiic connectors for ease of use. Code SP030 Last items in stock Price €52.99
SparkFun Qwiic HAT for Raspberry Pi The Qwiic HAT is an absolute basic of Qwiic system for Raspberry. It enables a quick and efficient connection of an sensor to your Raspberry over I2C bus (GND, 3.3 V, SDA and SCL). As Qwiic enables daisy chaining of components, you can pretty much install as many sensors on the Qwiic HAT as you want. On top of that it fits perfectly Pi Tin enclosure from SparkFun enabling connection while in case. Code SP031 Available Price €7.99
SparkFun Qwiic Adapter This little board is simply a I2C board to Qwiic converter. It pretty much enables any device with I2C connectors to work with Qwiic system. It has two Qwiic ports - both of them served with the same I2C bus. You simply stick the board on your I2C board and get additional two Qwiic ports. It is as easy as it sounds Code SP033 Available Price €1.89