Raspberry Pi 3

The Raspberry Pi 3 Model B+ is the penultimate product in the Raspberry Pi 3 range. It is the significant evolution in board performance compared to Raspberry Pi 3 B with the increase in processor frequency from 1.2 GHz to 1.4 GHz. Compared to serial 2 the board offers standard 802.11 b-g-n and bluetooth BLE 4.1 connectivity.

The Raspberry Pi 3 Model A + extends the Raspberry Pi 3 range to the A + board format.

• - Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit 1.4 GHz SoC
• - 512MB LPDDR2 SDRAM
• - 2.4GHz and 5GHz IEEE 802.11.b / g / n / ac Wireless LAN, Bluetooth 4.2 / BLE
• - Extended 40-pin GPIO header
• - HDMI full size
• - Individual USB 2.0 ports
• - CSI camera port to connect a Raspberry Pi camera module
• - DSI display port to connect a Raspberry Pi Touch display
• - 4-pole stereo output and composite video port.
• - Micro SD port for charging your operating system and storing data.
• - 5V / 2.5A direct current input. Hardware Specifications:

The Raspberry Pi 3 Model B is the third generation product in the Raspberry Pi range. The module was revolutionary for introducing the integrated WiFi and bluetooth connection which is still impressive for its quality. In addition, it introduced a processor upgrade to 1.2 GHz.

Raspberry Pi 3 B + module and 16GB micro SD card preloaded with NOOBS operating system.

• Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
• 1GB LPDDR2 SDRAM
• 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN
• Bluetooth 4.2, BLE Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)
• Extended 40-pin GPIO header
• Full-size HDMI 4 USB 2.0 ports
• CSI camera port for connecting a Raspberry Pi camera
• DSI display port for connecting a Raspberry Pi touchscreen display
• 4-pole stereo output and composite video port Micro SD port for loading your operating system and storing data
• 5V/2.5A DC power input Power-over-Ethernet (PoE) support (requires separate PoE HAT) 

The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range. Característica: Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @>

The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range. Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @>

16 servo motors with one board seems impossible? With this board not only it isn´t impossible, but it even seems easy. Additionally, you won´t need to sacrifice any of your valuable GPIOs as the HAT connects directly via I2C. Additionally, you have a serial terminal connection at your disposal.

You can supply the power to the board through your Pi or directly if you are going for larger servos and would need a separate source of power. Simply scrap a small blob of solder on the isolation jumper.

You are looking for an easy way to program a microcontroller in your Arduino. It has never been easier - with this board you can do it in the record speed with support or Raspberry (or without for that matter, as the HAT works on the standalone basis as well). It was first developed as an in-house solution for Sparkfun production, and for its quality and usefulness ended up in mass production with a solid fan following.

The board includes several handy features ranging from the capacitive touch button for a standalone mode to launch programming, LEDs indicating the status of the program upload as well as some whiteboard labels to keep track of your projects.

Ever needed a microphone for your project. This tiny little board will fulfill all your needs - it is not only mobile, but as well easy to connect. A low power, efficient, omnidirectional AMP401 microphone has an analog output. It works great for near and long range uses and is particularly suitable for a mobile projects given its extremely low energy consumption. You can use it in a range of applications - we can see it used in smartphones, cameras or electronic nannies.

This fingeprint scanner from ADH-Tech combines a highly precise fingerprint sensor module with an onboard MCU and UART interface enabling trivially very connection to any project.

The scanner independently reads and analyses the fingerprint thanks to an MCU algorithm that can send a converted digital signal to a peripheral serial interface for a data read. The onboard MCU algorithm enables operations such as for example a fingerprint enroll.

Kingston Class 10 MicroSD 8GB Memory Card features:
- SDHC Class 10 UHS-I (SDC10G2 / 8GBSP) for Raspberry
- Capacity: 8Gb
- Class: 10 - MicroSD dimensions 11mm x 15mm x 1mm
- FAT32 format
- Service temperature -25 ° C to 85 ° C
- Storage temperature -40 ° C to 85 ° C
- Voltage 3.3V

The 28 sensor kit is a great extension kit for your micro: bit. Using Sensor shield for micro: bit you can connect all the modules included in the pack only by the connectors without the need to solder or wire any part. Now you can just concentrate on programming with your big mirco: bit.

This HAT is an open source portable sensor that provides the level of suspended particulate matter quantity with its mass. It has a powerful and high-tech PMSA003 sensor that provides the information of suspended particulate matter (PM1.0, PM2.5, PM10) in the air per unit volume.

SNES Controller / Joypad / USB Gamepad / Super SNES Controller
Classic Super SNES USB Controller supports the operating system: Windows 98 / ME / Vista / 2000/2003 / XP / 7/7/8 / 8.1 / 10; Mac OS X and beyond,
Arcade, Nintendo, Raspberry pi and Model 2B pi emulator, Retro Pi OS
The SNES controller works with any emulator you want to download and use.
The Google SNES emulator, then the same for ROMs (for example: Joystick Mapper / OpenEMU for Mac OS; Virtuans for Windows OS, etc.)
Super SNES USB 1.5m controller features:

- USB SNES controller with standard USB 2.0 port,
- Actual cable length: 1.5 meters (59 inches),
- Works very well with the Raspberry emulation,
- Weight: 200g.

Read speed: up to 100 MB / s
5 years warranty
Shock resistant
Waterproof
Use with cameras, mobile phones Toshiba Class 10 MicroSD 16GB Memory Card with adapter features:
- Capacity 16GB
- Class 10 UHS-1 U1
- Dimensions of the microSD 11 mm x 15 mm x 1 mm
- FAT32 format
- Operating temperature -25 ° C to 85 ° C
- Storage temperature -40 ° C to 85 ° C
- Voltage 3.3

Attention: You need to download newest image "RetroPie 4.4" if you use this NESPi Case + with Raspberry Pi 3B +: https://retropie.org.uk/download/ Safe Shutdown and Safe Reset NESPi Case can have SAFE SHUTDOWN and SAFE RESET functions. (Scripts is necessary). Safe shutdown scripts: https://github.com/RetroFlag/>

This set will make your project look like take out of 80s! Box and two controllers imitate a game console only for 25 EUR. Do you miss old times of Nintendo? You won´t anymore with this great set. It is perfect for a gift as well. Check out product characteristics for further information

Official Raspberry Pi keyboard suitable for all Raspberry Pi products. Comfortable ergonomic design.

SparkFun Hamburger speaker is a high quality speaker in a small form and with even smaller price. You wouldn't believe you can get a quality product for less than 7€, right? Well, we couldn't believe that as well, but SparkFun makes that possible.