WS2812B RGB LED Strip White 1m 30 LED/M IP65
  • WS2812B RGB LED Strip White 1m 30 LED/M IP65
  • WS2812B RGB LED Strip White 1m 30 LED/M IP65
  • WS2812B RGB LED Strip White 1m 30 LED/M IP65

WS2812B RGB LED Strip White 1m 30 LED/M IP65

P0103

WS2812B RGB LED Strip White 1m 30 LED/M IP65 features:
- IP65 RGB Addressable Smart Arduino
- RGB LED WS2812B
S2812B are LEDs that have integrated logic, so it is possible to vary the color of each LED individually
S2812B includes a built-in inside each LED, which allows each pixel to be accessed individually
- For this reason, these types of LEDs are called individually indexable
- They are based on the 5050 LED
- 30 individually indexable LED diodes
- 24-bit color control (8-bit PWM per channel)
- 16.8 million colors by LED
- One-wire communication
- Power: 5 V
idth: 11 mm
- Thickness: 2.6 mm
- Length: 1 meter
- Consumption: 1.8A (all white)
ater resistant

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

WS2812B RGB LED Strip White 1m 30 LED/M IP65 features:


- IP65 RGB Addressable Smart Arduino
- RGB LED WS2812B
- WS2812B are LEDs that have integrated logic, so it is possible to vary the color of each LED individually
- WS2812B includes a built-in inside each LED, which allows each pixel to be accessed individually
- For this reason, these types of LEDs are called individually indexable
- They are based on the 5050 LED
- 30 individually indexable LED diodes
- 24-bit color control (8-bit PWM per channel)
- 16.8 million colors by LED
- One-wire communication
- Power: 5 V
- Width: 11 mm
- Thickness: 2.6 mm
- Length: 1 meter
- Consumption: 1.8A (all white)
- Water resistant
- With 3M adhesive
- Input and output terminals (data and power)

Customers who bought this product also bought

3D Printer Cover for Ender 3/ Ender 3 Pro/Ender 3 V2/ CP-01/ CR-100

3D Printer Cover made of resistant fabric, protected from the inside with fireproof aluminium foil. It is used to cover the open workspace on small 3D printers. It provides a constant temperature around the print being created, it also protects against the phenomenon of tearing off the heating table of the 3D model by accidental gusts of air, which appear in the room. The cover is made of abrasion-resistant material. It can be easily put on the device and removed after work. The product measures 480 x 600 x 720 mm. It is compatible with the following Creality printers: Ender-3, Ender-3 Pro, CP-01, Ender-2, CR-100.

I1006

Price €89.50

Resistors Kit 5% 0,25W 1/4W

Resistors Kit 5% 0,25W 1/4W features:
 
-10 pcs - 100 Ohm
-10 pcs - 220 Ohm
-10 pcs - 1,0k Ohm
-10 pcs - 2,2k Ohm
-10 pcs - 4,7k Ohm
-10 pcs - 10k Ohm
-10 pcs - 100k Ohm
-Type: Carbon film
-Tolerance: ±5%
-Power: 0.25W
-Dimensions: 2x7mm

D0071

Price €2.80

CP2102 USB 2.0 A RS232 Converter UART TTL Serial

Ideal for connecting TTL RS232 devices to your PC through the USB port. CP2102 USB 2.0 A RS232 Converter UART TTL Serial features:
- Controller CP2102
- 5 pins: 3.3v, 5.0v, TxR, RxD, GND
- Standard USB type to male and 5 pin TTL connector
- 3 Status LEDs: Power, RX and TX
- USB 2.0 specification with 12Mbps maximum speed

C0001

Price €3.70

Pro Mini 16MHZ 5V Arduino compatible board

- Bootloader Pin Header Compatible 100% ARDUINO
- Pro Mini Atmega328P 5v 16Mhz
- Miniaturized compatible version of Arduino Pro Mini
- It has an Atmega328P chip running at 16Mhz with a factory-loaded bootloader. It does not include pins so we can only solder the pins that we need
Characteristic:
- ATmega328P 16MHz chip with external quartz crystal
- Auto-reset - micro switch
- Integrated 5V regulator
- FLASH 32kB memory
- SRAM 1kB memory
- EEPROM 1Kb memory
- Analog input A0-A7
- 8 PWM channels
- External interruption
- TWI / I2C, UART, SPI interfaces
- Power and status LEDs
- Dimensions: 18x33mm
- Weight: 30 grams
Useful links for Arduino />

B0019

Regular price €8.95 -€4.00 Price €4.95

Voltage Regulator 2% 5V 1.5A TO-220 L7805ACV

Voltage Regulator 2% 5V 1.5A TO-220 L7805ACV features:
- Output Type: Fixed
- Voltage Output: 5V
- Manufacturer: ST Microelectronics
- Current Output: 1.5A
- Max input voltage: 35V
- Input voltage min .: 5V
- Operating temperature: 0ºC to + 125ºC
- Encapsulated: TO-220
- Polarity: Positive
- 2% output voltage tolerance (A version)
- Quantity: 1 unit

T0016

Price €0.66

Motor Nema 17 4.28kg 17HS4401

It is one of the most popular stepper motors with 200 steps per turn and a maximum load of 4.28 kg/cm. It comes with a 1m cable. We have the best stepper motors at the best prices! 

I0020

Regular price €11.50 -€1.55 Price €9.95
€9.75

8,06 tax excl.

Tax included 1
30+ items
Price €9.75

Order until 4pm we will send today
30 days return