Laminated Copper Clad Prototype PCB Circuit Board 30x19cm

Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 1.5mm features:
- 100gr. 1.5mm diameter welding wire. 60% tin and 40% lead
- Fusing temperature 183 „ƒ / 190 „ƒ
- Alloy Sn60 Pb40
- Flux 2.5%
- Quantity: 1 unit

Encapsulated with water resistant stainless steel with sensor dimensions 5,5 * 50mm, cable length 5m. DS18B20 Digital Temperature Sensor Probe 5m features:
- Based on the DS18B20 chip
- Supply voltage: 3 ~ 5.5V
- Consumption <5mA
- Measuring Range: -55 °C to 125 °C
- Accuracy: +/- 0,5ºC
- Outputs: - GND black
      - Vcc red
      - Yellow digital output
- Inocidable steel
- Cable length: 5m

Nozzle Head 0.4 1.75mm MK8 3D Printer Extruder features:
- MK8 Precision Nozzle: 0.4mm
- Material: Copper
- Size: 13mm x 6mm
- Suitable for Filament: 1.75mm
- Quantity: 1 unit

TDA2030A 1X18W Audio Amplifier features:
- Chip: TDA2030A
- Power supply: DC 6V ~ 12V
- Channel type: Single channel - Output power: 1 x 18 W
- Output output: 4 ~ 8 Ohm
- Mono mode
- Size (LxWxH): 31.6 x 23.5 mm

Digispark is a development board based on the ATTINY85 microcontroller from ATMEL born in a successful campaign on Kickstarter.
Similar to the Arduino line , It is one of the smallest boards on the market.
Programmable directly from USB with the same Arduino tools. It has a built-in Micronucleus bootloader and can be replaced by similar ones such as the Trinket bootloader. Adafruit or others.
You can use many of the same Arduino libraries and you have your own on the digispark wiki. Arduino compatible Attiny85 Digispark board features:
- USB power supply
- External power supply (7v-35v DC 12v maximum recommended)
- 5V DC 500mA regulator on board
- Programmable with the Arduino IDE
- Loaded with Micronucleus bootloader

It is not possible to reverse the polarity by mistake.
JST PHR-3 Male 3 PIN 2mm connector features:
Manufacturer JST Connector series: PH Connector: female connector Connector class: male Connector type: conduit-board Contactor raster: 2mm Number of pins: 3 Electrical mounting: THT Voltage Working: 100V Working current: 2A Working temperature: -25 ... 85 ° C Spatial orientation: vertical technical data sheet PH series

12V electric drill, with ON/OFF switch with 2 grinding tips, 2 burrs, 4 nozzles

6 DIP pins and 2 positions DPDT. This switch is widely used to control the operation of many small electronic power projects, including volume and other controls for audio video, dimmer controls for lights.
It is also a great component for DIY. Vertical Slide Switch 3P2T 50V 0.5A features:
- Type: 3P2T
- Contact resistance: 30 MΩ max.
- Insulation resistance: 100 MΩ
- Maximum operating voltage: 50V
- Maximum operating current: 0.5A
- Can support 500 VAC for 1 minute
- Step between pins: 2.54mm / 0.1 "
- Pin size: 4.5x0.5x15 / 0.77 "x0.19"
- Type of current: DC
- Pins to be welded
- Switch action: 2 ON / OFF positions
- Shape of interrupter: rectangular
- Size: 16x6.5x15 / 0.2 "x0.02"