Micro Motor 3V 5V 6V DC DIY for Arduino UNO Mega Robotics For Arduino, Smart Car, Robotics.Small electric motor magnet for direct current (DC). Micro Motor 3V 5V 6V DC DIY Arduino UNO Mega Robotics features: - Operating voltage: 1.5V to 6V- DC current: 350mA- Torque max.: 15g / cm- Max speed: 12000rpm- Weight: 16.5 g Code R0037 Available Price €0.98
SSR-25 DD 25A DC-DC Solid State Relay 5V-60VDC output The DC-DC 25A solid state relay has a 3-32VDC input and a 6-60VDC output. It has a maximum load capacity of 25A. It has a long operating life and high reliability, a compact size. This relay switches very quickly. Fotek SSR-25 DD 25A DC-DC Solid State Relay 5V-60VDC output Code RL017 Available Price €7.99
Power Supply 12V 30A 360W Characteristic: - Supply voltage: 110 / 230V AC - Output voltage: 12V DC - Output amperage: 30A - Power at 12V: 360W - Dimensions: 215mm x 115mm x 50mm Code A0129 Available Regular price €28.95 -€4.00 Price €24.95
TP4056 Lithium Battery Charger Module 5V Mini USB TP4056 Lithium Battery Charger Module 5V mini USB features: - Based on TP4056ES regulator - Lipo mini USB Li-Ion charger - Input Voltage: 4.5V - 5.5 VDC - Full charge voltage: 4.2V +/- 1.5% - Max Output Current: 1A - Indicator LED: charging red, charging green - Operating temperature: -10ºC to + 85ºC - IN + and IN- connection for electronic circuits - Battery protection against over-discharge voltage: 2.5V - Protection against over current battery: 3A - Measurements: 25x19x5 mm - Ideal for 18650 batteries Code A0008 Available Price €0.99
Resistor 220 Ohm 5% 0,25W 1/4W Resistor 220 Ohm 5% 0,25W 1/4W features:-220 Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0008 Available Price €0.08
Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features: - This extruder is ready to mount and print - PC4-M6 bowden pneumatic connector - 12V 2-wire 40x40mm fan - Metal fan cover - MK8 heat sink - MK8 aluminum extruder - PAP Nema17 3.25V 1.3A motor with cable - Capable of loading with 4.48 kg / cm Code I0088 Available Price €24.90
DC Step-Down Converter 5A 4-38v to 1.25-36v XL4015 LED LiPo Descent module.Use a multimeter to check the output voltage and adjust the potentiometer.Control of voltage and current.DC Step-Down Converter 5A 4-38v to 1.25-36v XL4015 LED LiPo features:- Input voltage: 4-38V- Output voltage: 1.25-36V- Current output: adjustable, 4.5A (max 5A)- Output power: 75W maximum- Operating temperature: -40 to + 85 ºC- Operating frequency: 180KHz- Efficiency conversion: up to 96%- Short circuit protection: Yes (limited current 8A)- Protection over temperature: the output switches off automatically- Size: 62mm x 26mm x 14mmPrincipal functions:- Step-down converter with overcurrent protection- Li-Po battery charger, Li-Ion Code A0014 Available Price €3.49
Double-Sided Adhesive Tape 5mm 50m Double-Sided Adhesive Tape 5mm 50m features: - Transparent double-sided adhesive tape, 5mm wide and 50m long- After its removal it leaves no residue- Given its versatility it will allow multiple use options Code I0147 Last items in stock Price €2.90
Fan Black 12V 2x PC CPU Cables Characteristic: - Voltage: 12V - Consumption: 0.3A - Screw diameter: 4mm - Product duration in operation: 30000 hours - Operating temperature: -10 ° C to 65 ° C - Cable length: 14.5cm - Dimensions: 92mm x 92mm x 25mm Code I0054 Available Price €2.89
Fan 12V 2x Cables PC CPU case Fan 12V 2x Cables PC CPU case features: - Voltage: 12V - Consumption: 0.28A - Screw diameter: 3.5mm - Life time useful: 30,000 hours - Operating temperature: -10 ° C to 65 ° C - Cable length: 24.5cm - Dimensions: 80mm x 80mm x 15mm Code I0055 Available Regular price €3.49 -€0.90 Price €2.59
Fan 5V 2x Cable 50x50x15mm Fan 5V 2x Cable 50x50x15mm features: - Voltage: 5V - Speed: 7000rpm ± 10% - Screw diameter: 4.5mm - Time lifespan: 50,000 hours - Operating temperature: -10 ° C to 70 ° C - Cable length: 28cm - Dimensions: 50mm x 50mm x 15mm Code I0169 Available Price €2.09
Fan 12V 2x Cable 50x50x15 3D Printer Reprap Fan 12V 2x Cable 50x50x15 3D Printer Reprap features: - Voltage: 12V - Speed: 7000rpm ± 10% - Screw diameter: 4.5mm - Time lifespan: 50,000 hours - Operating temperature: -10 ° C to 70 ° C - Cable length: 28cm - Dimensions: 50mm x 50mm x 10mm Code I0120 Available Price €2.09
Mini Fan 12V 2x 3D Printer Cables Mini Fan 12V 2x 3D Printer Cables features: - Voltage: 12V - Consumption: 80mA - Speed: 2600rpm +/- 10% - Temperature operating: -10 ° C to 65 ° C - Cable length: 12cm - Dimensions: 25mmx 25mm x 10mm Code I0027 Available Price €1.59
Kit Peltier Cell 12V TEC1 12706 Fan Thermal Paste DIY Kit Peltier Cell 12V TEC1 12706 Fan Thermal Paste DIY features: - Mounting kit - Ceramic Peltier Cell 12V TEC1-12706 - Heatsink 12x10x25mm (hot side) - Heatsink 60x40x25mm - Color black or silver - Thermal insulation 70x65mm for cell - Fan 12V 90x90x25mm with grille - Thermal paste 0.5g - Screws - Peltier effect cell model TEC1-12706, 12v, max. 60w and 6A, with a temperature difference between their faces of up to 67ºC - Max Power: 60w - Voltage: 12v - Max Voltage: 15.2v - Max Current: 6A - Temperature Variation: Code M0059 Available Price €18.79
Fan 12V 2x Cables 3D Reprap Printer Fan 12V 2x Cables 3D Reprap Printer features: - For Prusa RepRap 3D Printer - Voltage: 12V - Consumption: 90mA - Speed: 7000rpm ± 10% - Noise level: 25dB ± 10% - Screw diameter: 3.5mm - Service Life Time: 35000 hours - Operating temperature: -10 ° C to 65 ° C - Cable length: 28cm - Dimensions: 30mm x 30mm x 10mm Code I0045 Available Price €1.59
Fan 12V 2 wire Reprap 3D printer Characteristic: - Voltage: 12V - Consumption: 120mA - Speed: 4800rpm -5600rpm - Noise level: 25dB ± 10% - Screw diameter: 4.5mm - Life time: 40000 hours - Operating temperature: -10 ° C to 65 ° C - Length Cable: 28cm - Dimensions: 40mm x 40mm x 20mm - For cooling MK8 hotels Code I0025 Available Regular price €2.54 -€0.55 Price €1.99
DIY Paste Dissipative Fan Kit for Ceramic Peltier Cell TEC1-12706 Characteristic: - Heatsink 12x10x25mm (hot side) - Heatsink 60x40x25mm (black or silver color) - 70x65mm thermal insulation for cell - Fan with grid 12V 90x90x25mm - Thermal paste 0.5g - Screws - Kit does not include: Peltier cell Ceramic TEC1-12706 12V Code M0060 Available Price €15.99
Peltier Thermoelectric Kit with Cooling Fan 12V 72W Kit includes heatsinks, thermal insulation for peltier cell, fan with grille, thermal paste, screws and TEC1-12706 12V ceramic peltier cell. Code M0227 Last items in stock Price €31.95
Fan 12V 2x Cable 50x50x15 3D Printer Reprap Fan 12V 2x Cable 50x50x15 3D Printer Reprap features: - Voltage: 12V - Speed: 7000rpm ± 10% - Screw diameter: 4.5mm - Time lifespan: 50,000 hours - Operating temperature: -10 ° C to 70 ° C - Cable length: 28cm - Dimensions: 50mm x 50mm x 10mm Code I0120 Available Price €2.09
Fan 12V 80x80x25mm Fan 12V 2x Cables PC CPU case features: - Voltage: 12V - Consumption: 0.28A - Screw diameter: 3.5mm - Life time useful: 30,000 hours - Operating temperature: -10 ° C to 65 ° C - Cable length: 24.5cm - Dimensions: 80mm x 80mm x 25mm Code I0195 Available Price €4.45
Fan Black 12V 2x PC CPU Cables Characteristic: - Voltage: 12V - Consumption: 0.3A - Screw diameter: 4mm - Product duration in operation: 30000 hours - Operating temperature: -10 ° C to 65 ° C - Cable length: 14.5cm - Dimensions: 92mm x 92mm x 25mm Code I0054 Available Price €2.89
Fan 12V 2 wire Reprap 3D printer Characteristic: - Voltage: 12V - Consumption: 120mA - Speed: 4800rpm -5600rpm - Noise level: 25dB ± 10% - Screw diameter: 4.5mm - Life time: 40000 hours - Operating temperature: -10 ° C to 65 ° C - Length Cable: 28cm - Dimensions: 40mm x 40mm x 20mm - For cooling MK8 hotels Code I0025 Available Regular price €2.54 -€0.55 Price €1.99
Kit Peltier Cell 12V TEC1 12706 Fan Thermal Paste DIY Kit Peltier Cell 12V TEC1 12706 Fan Thermal Paste DIY features: - Mounting kit - Ceramic Peltier Cell 12V TEC1-12706 - Heatsink 12x10x25mm (hot side) - Heatsink 60x40x25mm - Color black or silver - Thermal insulation 70x65mm for cell - Fan 12V 90x90x25mm with grille - Thermal paste 0.5g - Screws - Peltier effect cell model TEC1-12706, 12v, max. 60w and 6A, with a temperature difference between their faces of up to 67ºC - Max Power: 60w - Voltage: 12v - Max Voltage: 15.2v - Max Current: 6A - Temperature Variation: Code M0059 Available Price €18.79
Fan 12V 2x Cables PC CPU case Fan 12V 2x Cables PC CPU case features: - Voltage: 12V - Consumption: 0.28A - Screw diameter: 3.5mm - Life time useful: 30,000 hours - Operating temperature: -10 ° C to 65 ° C - Cable length: 24.5cm - Dimensions: 80mm x 80mm x 15mm Code I0055 Available Regular price €3.49 -€0.90 Price €2.59
Peltier Thermoelectric Kit with Cooling Fan 12V 72W Kit includes heatsinks, thermal insulation for peltier cell, fan with grille, thermal paste, screws and TEC1-12706 12V ceramic peltier cell. Code M0227 Last items in stock Price €31.95
Fan 5V 2x Cable 50x50x15mm Fan 5V 2x Cable 50x50x15mm features: - Voltage: 5V - Speed: 7000rpm ± 10% - Screw diameter: 4.5mm - Time lifespan: 50,000 hours - Operating temperature: -10 ° C to 70 ° C - Cable length: 28cm - Dimensions: 50mm x 50mm x 15mm Code I0169 Available Price €2.09
Mini Fan 12V 2x 3D Printer Cables Mini Fan 12V 2x 3D Printer Cables features: - Voltage: 12V - Consumption: 80mA - Speed: 2600rpm +/- 10% - Temperature operating: -10 ° C to 65 ° C - Cable length: 12cm - Dimensions: 25mmx 25mm x 10mm Code I0027 Available Price €1.59
DIY Paste Dissipative Fan Kit for Ceramic Peltier Cell TEC1-12706 Characteristic: - Heatsink 12x10x25mm (hot side) - Heatsink 60x40x25mm (black or silver color) - 70x65mm thermal insulation for cell - Fan with grid 12V 90x90x25mm - Thermal paste 0.5g - Screws - Kit does not include: Peltier cell Ceramic TEC1-12706 12V Code M0060 Available Price €15.99