Third hand support for cable soldering Third hand stand for easy soldering of wires with a diameter from 1 to 5mm. Number of holes 5. Code MX0001 Last items in stock Price €3.79
Thermal tape 20mm type Kapton Characteristic: - Supports up to 280ºC - Electrical and antistatic insulation - Resistant to acidic products and alkaline - Solvent resistant - Adhesive - Length Approx: 26m Code I0053 Available Price €4.85
USB Digital Power Voltmeter Tester Amps Device to measure the power consumption of any device powered by USB: phones, chargers, USB disks, consoles, tablets ...USB Digital Power Voltmeter Tester Amps features:- Operating range: voltage 3.5 - 9V- Current 0 -3A- Resolution: 10mV 1mA- Error: <± 1.5%- Dimensions: 60 x 23 x 19mm Code K0083 Available Price €5.95
Isopropyl Alcohol 99.9% 500mL Isopropyl alcohol is used for cleaning: - of electronic devices, such as contact tips (such as those of ROM cartridges)- magnetic tapes and disk heads (such as those of audio and video recorders and flexible disk drives)- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal grease from heat sinks and integrated circuit packages (for example: CPU)-the keyboard and the LCD screen Code Q0036 Available Price €10.90
Compressed Air 300ml Spray Cleaner Compressed Air 300ml Spray Cleaner features: - Cleaning computers, keyboards, electronics, printers- All types of office material- Made in the EU - HIGH QUALITY- When using the cleaner, remember to turn off your electronic devices and wait until the gas has evaporated before turning on the devices Code Q0026 Available Price €8.90
Current Sensor ACS712 AC/DC 20A Hall Current Ammeter Sensor used to measure the current in the circuit to which it is connected. It is based on the ACS712 chip, capable of measuring intensity in both DC and AC. Current Sensor ACS712 AC/DC 20A Hall Current Ammeter features: - Output: Analog - Power: 5V - Accuracy: 1.5% - Measuring capacity: +/- 20A - Dimensions: 31 x 13 mm Code M0105 Available Price €3.38
SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base features: Flux liquid alcohol-based for electronic welding.Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductiveForm: liquidCapacity: 50mlContent of solid bodies: 0 ... 5%Viscosity (at 25 ° C): 794Mg / cm3 The flux cleans and prepares the surfaces and components to be welded, it facilitates the adherence and fluidity of the tin thanks to the rest of the components.It cleans easily with alcohol.It can be used with any tin. Security: - Do not inhale the vapors of the bottle or those that come off when welding.- Keep the boat tightly closed and far away from the children.- Use in ventilated spaces. Code Q0013 Available Price €3.79
2x Insulation Tapes PVC Black 10m x 15mm x 0.13mm 2x Insulation Tapes PVC Black 10m x 15mm x 0.13mm features:- PVC insulating tape with adhesive- Thickness of 0.13 mm- Measures 10m x 15mm- Quantity: 2 units- Heat resistance: 80°C Code H0031 Available Price €0.99
Technical Vaseline for Contacts and Bearings 35g - The electrical products and lubricants of the bearings- Its working temperature is up to 30 °C Technical Vaseline for Contacts and Bearings 35g features: - Solid product- White color- Specific smell- Melting point: 56 °C- Ignition temperature: 220 °C- Density at 20 °C: 822 kg / m3- Maximum temperature of use: 30 °C- Solubility in water: partial Code Q0081 Available Price €1.00
Flux Varnish LT-4 Plate Protector - The product protects PCB plates, allows for easier welding- The product protects the printed circuit boards against oxidation and corrosion during storage.- This allows a faster welding and avoids the "cold welding".- The application method allows easy distribution of the product on the plates.- Can be used during production, repair, maintenance and service.Flux Varnish LT-4 Plate Protector features:- Shape: Spray- Capacity: 100ml- Rosin RMA- Meets the requirements of DIN 8511, F-SW-31, PN EN 29454 1.1.1.A.Application:- PCB protection against oxidation,- Applied in the production of printed circuit boards immediately after engraving, Code Q0070 Available Price €5.95
Graphite Varnish 2x1.5ml Graphite Varnish 2x1.5ml features: - Can be used for the elimination of discontinuities in the graphite layer in printed circuits- Creation or reconstruction of routes in printed circuits of low intensityProtection of silver contacts from harmful direct contact of silver with rubber (in remote controls)- The packaging comprises two bottles, one with graphite varnish and the other with diluent (ethyl acetate)- High quality - manufactured in EU- Capacity: 2x1,5ml Code Q0073 Available Price €4.50
Transparent Insulating PCB Varnish 60 1 Liter Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Transparent Insulating PCB Varnish 60 1 Liter features: - A protective film, transparent- Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination- It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the protective film- PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors- Application temperature: od -40 ° C + 60 ° C Code Q0046 Backorder Price €21.09
Vaseline Technical Grease 20g Vaseline Technical Grease 20g features:- Lubricates moving surfaces, bearings,- Protects metal parts against corrosion and electrical contacts- Protects and preserves rubber and plastic- It can be used as mounting grease- Eliminates squeaks- Reduces and decreases friction Code Q0064 Available Price €1.80
Insulating Varnish Spray 100ml Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Insulating Varnish Spray 400ml features:-A protective film, transparent.-Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination-It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate theprotective film-PVB 16 is used, for example, in the storage of printed circuit boards and material that is going to besoldier, such as welding terminals or conductors.-Temperature of application: od -40 ° C + 60 ° C. Code Q0117 Available Price €3.89
PVB Varnish 60 Transparent Insulation 50ml Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. PVB Varnish 60 Transparent Insulation 50ml features: A protective film, transparent.Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination.Maintains welding, to perform a subsequent welding is not necessary to remove the protective film.PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors.-Temperature of application: -40°C + 60°C.-Operating temperature: -50°C + 150°C. Code Q0033 Available Price €3.15
Insulating Varnish Spray 400ml Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Insulating Varnish Spray 400ml features:-A protective film, transparent.-Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination-It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate theprotective film-PVB 16 is used, for example, in the storage of printed circuit boards and material that is going to besoldier, such as welding terminals or conductors.-Temperature of application: od -40 ° C + 60 ° C. Code Q0014 Backorder Price €11.29
Universal developer for photo varnish and positive printed circuit boards PCB The product provides a good development quality, protecting the sharpness of the color.The formulation is free of NaOH, which significantly increases safety at work. Universal developer for photo varnish and positive printed circuit boards PCB features: - Manufacturer: TermoPasty,- Na‚‚O content: ‰¥29%,- SiO‚‚ content: ‰¥28%,- Substances not dissolved in H‚‚O: 0%,- Whiteness: 97%,- Iron: 45 ppm,- Apparent density: 0.98g / cm³. Mode of use: - Store in airtight containers in dry, well-ventilated areas away from sources of heat and ignition.- Do not store together with flammable substances. Applications: - Developer of photos,- developer for PCB electronic boards. Content: Code Q0094 Backorder Price €2.49
Technical Vaseline for Contacts and Bearings 35g - The electrical products and lubricants of the bearings- Its working temperature is up to 30 °C Technical Vaseline for Contacts and Bearings 35g features: - Solid product- White color- Specific smell- Melting point: 56 °C- Ignition temperature: 220 °C- Density at 20 °C: 822 kg / m3- Maximum temperature of use: 30 °C- Solubility in water: partial Code Q0081 Available Price €1.00
Flux Varnish LT-4 Plate Protector - The product protects PCB plates, allows for easier welding- The product protects the printed circuit boards against oxidation and corrosion during storage.- This allows a faster welding and avoids the "cold welding".- The application method allows easy distribution of the product on the plates.- Can be used during production, repair, maintenance and service.Flux Varnish LT-4 Plate Protector features:- Shape: Spray- Capacity: 100ml- Rosin RMA- Meets the requirements of DIN 8511, F-SW-31, PN EN 29454 1.1.1.A.Application:- PCB protection against oxidation,- Applied in the production of printed circuit boards immediately after engraving, Code Q0070 Available Price €5.95
Graphite Varnish 2x1.5ml Graphite Varnish 2x1.5ml features: - Can be used for the elimination of discontinuities in the graphite layer in printed circuits- Creation or reconstruction of routes in printed circuits of low intensityProtection of silver contacts from harmful direct contact of silver with rubber (in remote controls)- The packaging comprises two bottles, one with graphite varnish and the other with diluent (ethyl acetate)- High quality - manufactured in EU- Capacity: 2x1,5ml Code Q0073 Available Price €4.50
Transparent Insulating PCB Varnish 60 1 Liter Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Transparent Insulating PCB Varnish 60 1 Liter features: - A protective film, transparent- Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination- It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the protective film- PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors- Application temperature: od -40 ° C + 60 ° C Code Q0046 Backorder Price €21.09
Vaseline Technical Grease 20g Vaseline Technical Grease 20g features:- Lubricates moving surfaces, bearings,- Protects metal parts against corrosion and electrical contacts- Protects and preserves rubber and plastic- It can be used as mounting grease- Eliminates squeaks- Reduces and decreases friction Code Q0064 Available Price €1.80
Insulating Varnish Spray 100ml Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Insulating Varnish Spray 400ml features:-A protective film, transparent.-Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination-It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate theprotective film-PVB 16 is used, for example, in the storage of printed circuit boards and material that is going to besoldier, such as welding terminals or conductors.-Temperature of application: od -40 ° C + 60 ° C. Code Q0117 Available Price €3.89
PVB Varnish 60 Transparent Insulation 50ml Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. PVB Varnish 60 Transparent Insulation 50ml features: A protective film, transparent.Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination.Maintains welding, to perform a subsequent welding is not necessary to remove the protective film.PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors.-Temperature of application: -40°C + 60°C.-Operating temperature: -50°C + 150°C. Code Q0033 Available Price €3.15
Insulating Varnish Spray 400ml Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Insulating Varnish Spray 400ml features:-A protective film, transparent.-Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination-It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate theprotective film-PVB 16 is used, for example, in the storage of printed circuit boards and material that is going to besoldier, such as welding terminals or conductors.-Temperature of application: od -40 ° C + 60 ° C. Code Q0014 Backorder Price €11.29
Universal developer for photo varnish and positive printed circuit boards PCB The product provides a good development quality, protecting the sharpness of the color.The formulation is free of NaOH, which significantly increases safety at work. Universal developer for photo varnish and positive printed circuit boards PCB features: - Manufacturer: TermoPasty,- Na‚‚O content: ‰¥29%,- SiO‚‚ content: ‰¥28%,- Substances not dissolved in H‚‚O: 0%,- Whiteness: 97%,- Iron: 45 ppm,- Apparent density: 0.98g / cm³. Mode of use: - Store in airtight containers in dry, well-ventilated areas away from sources of heat and ignition.- Do not store together with flammable substances. Applications: - Developer of photos,- developer for PCB electronic boards. Content: Code Q0094 Backorder Price €2.49