Thermistor NTC 1.0K 5% MF52A epoxy resin coating resistor

Ideal to power your Arduino board through the power input.
9v Battery Adapter Connector 6F22 with Cable features:

It has an automatic voltage regulator, which for practical purposes results in quieter operation and less vibrations.
Characteristic:
- Minimum operating voltage: 8 V
- Maximum operating voltage: 45 V
- Maximum current: ± 2.5 A (24V, adequately ventilated or refrigerated)
- Logic voltage: 3 V / 5.5V
- Microstep resolution: full, 1/2, 1/4, 1/8 , 1/16, 1/32
- Factory soldered temples
- 4-layer PCB, 2 oz. Copper for improved heat dissipation
- Short-circuit and overtemperature protection - Use potentiometer to adjust the current
- Measurements: 20x16x12 mm

Arduino UNO is the best board to start your experience with electronics and programming. If this is your first experience with the platform, UNO is the most robust board you can start with. UNO is the most widely used and documented board in the entire Arduino family. Its power ensures ATmega 328p microcontroller, the board is equipped with 14 digital pins, and 6 analog

DT321B Digital Multimeter, Portable Multimeter, AC / DC Voltage Meter, Blue Backlight, Battery tester, Transistors tester, Acoustic Continuity Tester.

2x CNY70 Reflective Optical Sensor with Transistor Output features:
- Reflective optical sensor with transistor output
- Reflective optical coupler used to distinguish edge or line detection
- Dimensions of the housing are 7 x 7 x 6 mm
- Supply voltage: 5V
- Maximum diode current: 50 mA
- Maximum collector-emitter voltage: 32V
- Maximum collector current of 50 mA
- Quantity: 2 units

LM35 Temperature Sensor LM35DZ TO92 features:
- The output is linear and each degree Celsius equals 10 mV
- Power supply from 4 to 30 Vdc
- Connection through analog input
- Temperature range from 0ºC to 100ºC
- Linearity +10 mV / ºC
- Quantity: 1 unit

Fixed lead inductor with high current, high reliability and low resistance 1 µH.
10x Fixed Lead Inductor 1μH - 10% features:
- Fixed Inductor 1 µH - Tolerance: 10%
- Axial lead power inductor,
- UL Polyolefin Retraction Tube Lead Inductor,
- Leaded inductor with ferrite core,
- AC line filters,
- Air core coil,
- Common mode shock coils,
- Radial impact inductors,
- Armored radial obstruction,
- Toroidal coil,
- Ferrite beads,
- Broadband chokes.

Voltmeter Amperemeter DC Red and Blue 100V 10A features:
- Supply voltage: 4.5V to 30V
- Voltage measurement range: 0V to 100V (± 1%)
- Min voltage resolution: 0.1V
- Current measurement range: 0A to 10A (± 1%)
- Min current resolution: 0.01A
- Operating current: 5mA to 15mA
- Display: Red LED color (Voltage) and Blue LED color (Intensity)
- Includes reverse polarity protection
- Measurement refresh time: 500ms
- Screen dimensions: 48 x 29 mm
- Recessed hole: 45.5 x 26.5 mm
- Depth: 21 mm
- Cable length: 150 mm
- Operating temperature: - 10ºC to 65ºC
- No battery needed
- Dual panel with voltmeter and digital ammeter