List of products by supplier Arduino

Arduino Due is the perfect board for powerful large-scale Arduino projects. This is the only Arduino microcontroller based on the Microchip SAM3X8E with an Arm Cortex-M3® processor. If other basic boards are not enough for your ideas and demands, this one will surely satisfy them. Add to this 54 pins (54 digital input/output pins, 12 analog inputs, 2 DAC, 2 CAN and 4 UARTS) and you have a board that will not stop before any obstacle.

Arduino Micro is based on the same architecture as Arduino Leonardo, but with a smaller form factor, which allows for easy placement on the test plates. That is, it has almost the same functionality but with a much smaller size. And that of size. As we all know, in electronics has meant a lot during the last decades (see example of computers). Developed together with Adafruit, the Leonardo has 20 digital input / output pins of which 7 can be used as PWM outputs and 6 analogue inputs, a 16 MHz crystal oscillator, a micro USB connection, an ICSP header and a reset button. The important thing is also that it comes already equipped with the USB despite its small size because we don't need to install an additional converter.

Arduino Nano A000005 is the smaller, friendlier version of Uno's badge. Perfect for IoT applications and for mobile device prototypes. This board is based on the ATmega328 and has a wide range of applications, thanks to its small size and flexibility.

Arduino UNO is the best board to start your experience with electronics and programming. If this is your first experience with the platform, UNO is the most robust board you can start with. UNO is the most widely used and documented board in the entire Arduino family. Its power ensures ATmega 328p microcontroller, the board is equipped with 14 digital pins, and 6 analog

The Arduino Leonardo is one of the most popular versions of the series, behind only the legendary Uno plate to which it has very similar features (see our comparison below). The board contains a microcontroller ATmega32u4 with the participation of 20 digital inputs/outputs, of which 7 can be used as PWM outputs and 6 analog inputs. The system works with the clock signal with the frequency of 16 MHz, has 32K Flash and 2.5 KB of SRAM RAM.

Arduino Mega 2560 R3  A000067 has been designed with larger and more ambitious projects in mind. It has 54 digital input / output pins (15 of which can be used as PWM outputs), 16 analog inputs, 4 UART (i.e. hardware serial ports). The large number of analog and digital pins, along with larger MEMORY, make the Mega 2560 ideal for devices such as 3D printers and other demanding applications. The Mega 2560 board is compatible with most shields designed for Arduino Uno.

The Arduino MKR FOX 1200 board offers a practical and cost-effective solution for adding Sigfox connectivity to projects requiring low power. 

Arduino MKR WAN 1300 tiene el mismo factor de forma que las otras placas Arduino MKR y ofrece mucha funcionalidad en un paquete muy pequeno. Utiliza el microcontrolador Atmel SAMD21 y el módulo Murata MCWX1ZZABZ LoRa para la conectividad. El MKR WAN 1300 ha sido disenado para conectar proyectos y aplicaciones con conectividad LoRa.

Arduino MKR WiFi 1010  ( ABX00023 )  es la evolución del MKR1000 y está equipado con un módulo ESP32 de u-blox. Su objetivo es acelerar y simplificar la creación de prototipos de aplicaciones IoT basadas en WiFi gracias a la flexibilidad del módulo ESP32 y su bajo consumo de energía. CONECTIVIDAD USB MICRO TIPO B WIFI & BLE

Nano was already a great invention and a super facilitator of many projects, but with Nano BLE opens yet another set of opportunities. First of all, the BLE module - the newest and lowest energy consumption connectivity solution, which effectively allows you to leverage the same technology as used in the newest mass-produced electronic devices

On top of all the upgrades presented in Nano BLE (64 MHz clock, 1Mb flash memory, 256Kb SRAM) Nano BLE Sense Rev2 brings basic sensors to the table. It is truly impressive how Arduino team managed to fit those on such a small factor, nonetheless they did and did so for 5 basic modules.

In the package, you get 9 axis IMU, humidity and temperature sensor, barometric sensor, microphone and vision sensor (gesture, proximity, color and light intensity). Such a set together with TensorFlow compatibility enables basic machine learning functionalities straight after taking the board out of the box.

Nano 33 IoT as the name would suggest is an WiFi enabled version of the famous Nano. It has an upgraded microcontroller to ARM Cortex SAMD21 y el módulo NINA-W10 (based on ESP32) from u-blox and a module IMU LSM6DS3.

Arduino has decided to further develop its catchy Nano project in the direction of more power. Nano Every is the simplest of the new series as it doesn´t include any sensors nor connectivity solution, however still significantly more powerful than standard Nano (50% more program memory and 2 times more RAM). Above characteristics make it perfect for projects of small devices with more advanced functionalities, such as audio processing or robotics.

The ideal package for teachers looking for classroom solutions that introduce programming and electronics through fun and engaging interactive projects.

It is a ready-made package with the curriculum available for ready-made classes - it comes with a booklet of 15 introduction classes written by Arduino team.

The Arduino Starter Kit class package is a solution package, containing six of the popular Arduino Starter Kits. This classroom package is for a classroom of at least twelve students - the recommended ratio is two students per kit - and is intended for use by middle school teachers looking for a comprehensive educational solution based on the Arduino platform.

Arduino Uno R4 WiFi is the original Arduino Uno module with the powerful 32-bit Renesas RA4M1 ARM Cortex M4 ARM Cortex M4 microcontroller. The board is equipped with 256 kB of Flash memory and 32 kB of SRAM, 14 digital I/O, including 6 PWM, 6 ADC and 1 DAC. Popular communication interfaces such as SPI, I2C, UART and CAN are available. It operates with a voltage of 5 V. The ESP32-S3-Mini chip handles WiFi and Bluetooth communication. The Uno R4 WiFi features a 12x8 matrix of addressable red LEDs as well as a Qwiic connector.

Arduino Uno R3 SMD is a variation of the Uno with SMD. It has 14 digital input / output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power connector, an ICSP header and a reset button. In addition, Uno SMD offers the following additional features: - ATmega16U2 instead of 8U2 as a USB to serial converter - 1.0

Imagine the simplicity of the Arduino One connected to the communication module. Seems too good to be true, right? That's Arduino One WiFi. Arduino Uno WiFi REV2 (ABX00021) with its integrated IMU (Inertial Measurement Unit) and WiFi is the ideal board to start making your first Internet application from scratch, or to use in the educational field. It has 14 digital input / output pins (5 of which are PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, an accelerometer, an RGB LED, a power connector and an ICSP header.