Wood Burning Thermograuvre Pyrograph 30W 6 Replacement Tips

Anti-Adhesive No-Fat Dry Spray Based on PTFE. Dry, no-fat, anti-adhesive agent based on pure PTFE. Perfect greasing solution for surfaces that must be slippery, especially when it is required to protect them against contamination present in the environment. Very low friction factor.

Totally new and of high quality.
Dissipate the heat of the computer by refrigerating it effectively.
It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.
Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features:
  - Color white
- Surface drying time [25 ° C, min]: 2- 8
- Hardness: 45 -75
- Tensile strenght (Mpa): 2.0
- Elongation (%): 100
- Thermal Conductivity W / mk:> 1,0
- Volume Resistance (c-in / W): <2.0 x 10 * 15
- Dielectric strength (KV / mm): 20
- Dielectric Constant: 3.0
- Dielectric loss factor (60Hz): 0.003
- Operating temperature (max): 200 ° C

Thermal Conductive Pad TO3 41.5x28.2x0.3mm 1.5W/mK features:
- The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator
- A double-sided adhesive product, reinforced with fiberglass
- Dimensions: 41.5x28.2x0.3mm

88x M3 Nylon Separator Kit Screw Hex Nut features:
- Hexagonal M3 made of nylon for screws and fasteners on PCB boards, model airplanes, DIY projects
- Can be used in prototype projects and robotics
- Box dimension: 128x 66x 24mm
- Quantity: 88 units
- Color: black

2 Double Side Prototype PCB Board 6x8cm features:
-Thickness of PCB: 1.6mm
-Material: high quality FR-4 glass fiber PCB
-Presented and numbered on both sides
-Top and bottom are identical copper layers
-Pads grid (pitch) 2.54mm/0.1", hole diameter 0.9mm

Integrated Circuit Supports DIP24 Width 17.78 mm features:
- Type: DIP DIL
- Total number of pins: 24
- Step between pins: 2.54 mm
- Material: Polybutylene terephthalate
- Length: 27.94 mm
- Width: 17.78 mm
- Temperature min .: -25 °C
- Max temperature: +85 °C
- RoHS compliant

Hot Air Digital Soldering Station ZD-8907 SMD features:
- For welding and desoldering SMD components
- Power: 220V-240V
- Temperature regulation 200°C - 500°C
- Power consumption 320 W (max.)
- Air Flow 22 l/min. (Max.)
- Nozzle diameter 21.5 mm
- Dimensions 58 × 290 mm
- Certifications CE, RoHS, LVD
- Guarantee 12 months

The components of the ratchet crimping pliers are made of special steel.
Designed according to human engineering factors, 50% energy can be saved when crimping.
AWG: 28 - 18
Length: 190 mm (approx.)
Crimp capacity: 0.1 - 1.0 mm².
For 2.54 mm 3.96 mm KF2510 connector weight 0.35kg

Soldering Iron 40W features:
- Power: 40W
- Power: 230V
- Equipped with tip B1
- Long length tip: 1mm
- Anti-thermal handle
- CE, RoHS and TUV certifications

Silicone Thermal Paste Syringe 25g features:
- Density at 20°C: 2.58 G/cm3
- Flashpoints: 350°C
- Freezing point: -50°C
- Coefficient of refraction: 1.405,
- Specific temperature at 50°C: 0.243 Cal/g K
- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K
- Constant dielectric at 100 Hz: 4.7 (± 0.1)
- Cross resistance: 5 x 10 to the power 14 Ohm x cm
- Loss rate at f = 100 Hz: 0.020 (± 0.003)
- Range of operating temperature: -50~200°C