Servo with Rotation 180 Servo Motor Type S3003
  • Servo with Rotation 180 Servo Motor Type S3003

Servo with Rotation 180 Servo Motor Type S3003

R0018

Servo with Rotation 180 Servo Motor Type S3003 features:
- Model Aircraft Futaba Arduino Robotics
- Operating Voltage: 4.8V to 6V
- Max Torque: 4.1kg / cm (6V)
- Operating speed: 0.23sec / 60 degrees (4.8V), 0.19sec / 60 degrees (6V)
- Max radius: 180º
- Temperature range: -20 + 60 C degrees
- Weight: 38 g
- Cable length: 26cm
- Dimensions: 40.5 x39x 20 mm
- Servo connector: JR
- Chinese manufacturing

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Servo with Rotation 180 Servo Motor Type S3003 features:

- Model Aircraft Futaba Arduino Robotics
- Operating Voltage: 4.8V to 6V
- Max Torque: 4.1kg / cm (6V)
- Operating speed: 0.23sec / 60 degrees (4.8V), 0.19sec / 60 degrees (6V)
- Max radius: 180º
- Temperature range: -20 + 60 C degrees
- Weight: 38 g
- Cable length: 26cm
- Dimensions: 40.5 x39x 20 mm
- Servo connector: JR
- Chinese manufacturing

Data sheet

Giro
180 grados

Customers who bought this product also bought

40x Male to male cables 10cm

40x Male to male cables 10cm features:
- Length: 10cm
- Quantity: 40 cables
- Dupont male connectors on both ends
- Compatible with 2.54mm female connectors
- High quality and good working condition
- Easy to install and use

K0107

Price €1.99

LED Display 1-Digit 7-Segment Red Common Cathode

LED Display 1-Digit 7-Segment Red Common Cathode features:
- Supply voltage of the segments: 3 VDC
- LED color of the segments: red
- Digit length: 14.2mm
- Digit width: 8.1mm
- Pin numbers: 10
- Diameter of pins: 0.51mm
- Step between pins: 2.54mm
- Consumption current per segment: 30mA
- Maximum admissible current per segment: 70mA
- Direct current by segment (pulse operation): 30mA
- Number of digits: 1
- Segment numbers by digit: 7
- Operating temperature: -25 ° C - + 85 ° C
- Storage temperature: -30 ° C - + 85 ° C
- Screen with common cathode connection
- Screen size: 12.6x19x8 mm
- This product is a 1 digit screen composed of 7 red LED segments with excellent brightness and features:.

P0118

Price €1.00

XL6009 DC-DC Step-Up Booster Controller LM2577

- The XL6009 module has a superior performance than the LM2577 module
- The regulator-booster of High performance
Characteristic:
- Based on the XL6009E1 regulator
- Input voltage: 3V-32V,
- Output voltage: 5-35V (adjustable),
- Output current: 2A maximum 3A (heat sink is required)
- Conversion efficiency: up to 94%
- Rectifier: not synchronous rectification
- Short circuit protection: current limitation, since recovery
- Operating temperature: industrial grade (-40 ° C - 85 ° C)
- Load regulation: ± 0.5%
- Voltage regulation: ± 0.5%
- Size: 50 x 22 x 15 mm

A0005

Price €2.45

40x Male to male cables 20cm

Characteristic: -Length: 20cm
-Quantity: 40 cables
-Mono Dupont connectors on both ends
-Compatible with 2.54mm female connectors
-High quality and good working condition
-Easy to install and use

K0006

Price €2.49

Rain Sensor Module Water Droplet Detector

The module has two outputs: analog A0 and digital D0.
digital output D0 - signal 0 or 1 appears depending on the configuration of threshold.
The threshold is fixed with the potentiometer. Characteristic: - Operating voltage: 3.3V -5 V - Sensitivity adjustable by potentiometer
- Dual output mode: analog and digital
- Red LED - power indicator
- Green LED - digital switching output indicator
- Measurements PCB: 3 x 1.5 cm
- Sensor measurements: 5.4 x 3.9 cm

S0022

Price €1.69

Nano plate V3.0 CH340 + Arduino compatible pins

It has an ATMega328P chip running at 16Mhz with a factory loaded bootloader
Characteristic:
- Microcontroller: ATmega328
- Operating Voltage (logic level): 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins: 14 (6 PWM outputs)
- Analog Inputs: 8 (A0-A7)
- DC Current per Pin I / O 40 mA
- Flash Memory: 32 KB (2 KB used by the bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Frequency: 16 MHz
- USB Communication - CH340
- Dimensions: 18 mm x 44 mm

B0026

Price €9.99

Wemos D1 ESP32 R32 WROOM-32 WiFi and Bluetooth

ESP32 processor development board with WiFi and Bluetooth (BLE) compatible with Arduino Uno shields. It is much faster than the ESP8266 processor (NodeMCU and the like) . Wemos D1 ESP32 R32 WROOM-32 WiFi and Bluetooth features:
Power: 5-12VDC WiFi 802.11 b / g / n / e / i (802.11n up to 150 Mbps) Bluetooth v4.2 BR / EDR and BLE. Compatible with Arduino Uno shields. 6 Analog input. 20 digital inputs / outputs (3.3V) (with PWM functions, interrupt). UART, SPI, I2C communication. Size: 68Ã — 53 mm Micro USB connection. 4Mbytes Flash Memory 520Kb Clock: 240Mhz (a core dedicated to WiFi processing) Temperature: -40C + 85C Current: 250mA (max) Current in saving mode: 0.15mA Operating current: 20mA (without WiFi) Useful links for Arduino / Raspberry programming and projects with Arduino /

W0094

Price €9.95

Related articles on blog

No related article on blog

€6.29

5,20 tax excl.

Tax included
Price €6.29

Order until 4pm we will send today
30 days return