M3x30 Nylon Hexagonal Splitter

HC-06 Bluetooth transceiver module with base.
The bluetooth module HC-06 is one of the best options for projects, in which you need wireless communications.
The transceiver module allows bluetooth wireless connections as a slave, ready to listen for connection requests.
Bluetooth Transceiver Module HC-06 Wireless features:
- Chipset CSR BC417
- 3.5V - 5V power
- Bluetooth version V2.0 + EDR
- Frequency: 2.4GHz ISM band
- Modulation: GFSK
- Reach approx. 10m
- Security: Authentication and encryption.
- Speed-> Asynchronous: 2.1Mbps (Max) / 160 kbps; Synchronous: 1Mbps / 1Mbps
- Supports AT commands for configuration through a serial port
- Working temperature: -20ºC to + 75ºC
- Working current - pairing: 80 mA

Version compatible with Arduino Nano V3.0
It has an ATMega328P chip running at 16Mhz with bootloader loaded factory.
Characteristic:
- Microcontroller: ATmega328
- Operating Voltage (logic level): 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins: 14 (6 PWM outputs)
- Analog Inputs: 8 (A0-A7)
- DC Current per I / O pin 40 mA
- Flash memory: 32 KB (2 KB used by the bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Frequency Clock: 16 MHz
- USB Communication - CH340
- Dimensions: 18 mm x 44 mm

The piezoelectric buzzer has a simple structure in which a ceramic piezoelectric disk is affixed to a vibrating plate. An alternative voltage applied to this element will cause a contraction or diametrical expansion of the element. This feature is used to fold a vibrating plate, which generates sounds. 2x Passive Buzzer 5V features:

- Input voltage: 3V to 12V
- Diameter: 12mm
- Height: 7.5mm
- Pin spacing: 6.5mm
- Impedance: 16 Ohm
- Working frequency: 2 to 5 KHz
- Quantity: 1 unit

Pack 10pcs of micro servo 9g SG90.

3.5mm Audio Jack Breakout Headphone Video Audio MP3 Jack Module. This female jack connector adapter 3.5mm audio soldered on a PCB board, it is ideal to use in our projects. TRRS connectors are the audio-style connectors seen on some phones, MP3 players and development boards. TRRS stands for "Tip, Ring, Ring, Sleeve", reflecting the fact that unlike a standard stereo connector, this one actually has three conductors and a ground. 

20x M3x10 Nylon Hexagonal Splitter features:
-PA66 material
-Type: female / female
-Thread size / M3 inner diameter
-Body length: 10mm
-Quantity: 20 units
-Color: white

Support for ultrasounds, HC-SR04 distance meter.
Ideal to install the sensor on mobile platforms such as robots, vehicles, etc. Support for HC-SR04 Ultrasonic Sensor features:
- Material: Acrylic
- Color: transparent
- Includes screws

Fan 12V 2x Cables 3D Reprap Printer features:
- For Prusa RepRap 3D Printer
- Voltage: 12V
- Consumption: 90mA - Speed: 7000rpm ± 10%
- Noise level: 25dB ± 10%
- Screw diameter: 3.5mm
- Service Life Time: 35000 hours
- Operating temperature: -10 ° C to 65 ° C
- Cable length: 28cm
- Dimensions: 30mm x 30mm x 10mm