Rain Sensor Module Water Droplet Detector

Screen OLED 0.96" 128x64 White SPI I2C 7 Pin features:
- Oled 0.96 "screen with 128 * 64 pixels
- Drive IC model SDD1306
- Power: 3V-5.5V - Viewing angle: 160 degrees
- SPI interface (I2C can be changed)
- Low consumption: 0.08W
- Operating temperature: -20 to 70 ºC
- PCB board dimension: 27 x 27mm
- Supports many control chip: 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
- OLED technology offers high contrast, significantly improves black on screen energy efficiency - very low power consumption Applications: - Due to the size, quality and consumption of smart watch products, portable meters , medical devices, portable players, etc.

It is ultra compact and very low consumption. It works at 2.4GHz frequencies (free frequency) and is ideal for telemetry projects, robots, peripheral control, video game control applications, remote temperature sensors, pressure, alarms, etc ... NRF24L01 + Wireless Transceiver Module 2.4GHz features:
- Based on chip NRF24L01 + Ultra Low Power
- Free band: 2.4GHz ISM
- Speed: 250kbps, 1Mbps, 2Mbps
- Working current - reception: 13 mA
- Transmission: 11 mA (900nA -deep sleep mode)
- Receiving sensitivity: -94dB 250kbps
- Coverage in closed spaces: 15m / 30m
- SPI interface
- Input voltage: 1.9V- 3.6V
- Input / output port voltage: 0V-3.3V / 5V
- Coverage in open areas: 100m approx.
- Clock frequency: 16MHz

Push button 6x6x4mm features:
-Touch Push Tact Switch mini electronic Arduino push button
-Measures: 6x6x4.3mm

- HC-05 Bluetooth transceiver module with base
- The bluetooth module HC-05 is one of the best options for projects where you need wireless communications.
- The transceiver module (transmission / reception) allows bluetooth wireless connections like master or slave, works in a transparent way as if we made a RS-232 TTL serial connection with cable.
Bluetooth Transceiver Module HC-05 Wireless features:
- Chipset CSR BC417
- 3.6 to 6 Vdc power supply
- Bluetooth version V2.0 + EDR
- Frequency: 2.4GHz ISM band
- Modulation: GFSK
- Reach approx. 10m
- Security: Authentication and encryption.
- Speed-> Asynchronous: 2.1Mbps (Max) / 160 kbps; Synchronous: 1Mbps / 1Mbps

Original Atmel DIP-8 ATtiny85-20PU Tiny85-20PU Microcontroller IC features:
- Series: low power AVR®
- Core Processor: AVR
- Package / Case: 8-DIP
- Core Size: 8-Bit
- Speed: 20MHz
- Connectivity: SPI
- Number of I / O: 6
- Program MemorySize: 8KB
- Program MemoryType: FLASH
- EEPROM Size: 512B
- Voltage - Supply (Vcc / Vdd): 2.7V ~ 5.5 V
- Data Converters: 10bit A / D, 4 chanels
- Oscillator Type: External
- Operating Temperature: -40 ° C ~ 85 ° C
- RoHS: Yes
- Quantity: 1 unit

10x Linear Potentiometers 1k OHM kΩ features:
- Horizontal variable resistance PCB
- 1k Ohm kΩ Linear
- Quantity: 10 units

Characteristic: - Solder paste according to DIN EN 29454-1 1.1.2.C.
- Flux paste based on activity rosin medium.
- Easy to weld: copper, silver, zinc and nickel plated. Flux residues after soldering do not cause corrosion of non-ferrous metals and can remain in the joints .
Operating temperature up to 350 C.

This module equipped with a PCF8591 converter has a low current power supply and includes 8 bit CMOS data acquisition devices.
Your converter has four analog inputs, one analog output and one I2C serial bus interface.
It is supplied in the voltage range 2.5V-6V, analog voltage between the negative potential VSS and positive VDD. The control and data signals are transmitted on the two-wire I2C bi-directional bus to the transformed series.
The intensity of the ambient light can be converted into a digital signal thanks to its integrated photoresistor.
It allows access to eight PCF8591 converters on the same I2C bus without additional equipment. Converter Module AD-DA PCF8591 - Analog Voltage 2.5V-6V features:
- Supply voltage (between VSS and VDD): 2.5-6VDC