ESP32-CAM WiFi Camera + Bluetooth Module The ESP32-CAM is a camera module with the ESP32-S chip. It features an OV2640 camera, several GPIOs to connect peripherals, and microSD card slot. Code W0100 Available Price €9.45
Heart Rate Oximetry Sensor Module for Arduino MAX30100 This detection module that allows you to detect your heart rate and blood oxygen level from your Arduino project. You can monitor your blood oxygen level yourself to avoid going to the doctor or pharmacy on purpose. Simply press the sensor with your finger and wait for the reading of hemoglobin (Spo2), heart rate and Perfusion Index (PI%). It is a solution as an integrated heart rate sensor and pulse oximetry, which includes two LEDs, a photodetector and is optimized for analog low noise optics. Code S0148 Available Regular price €6.95 -€1.00 Price €5.95
MyoWare Cable Shield This Shield provides a 3.5mm connector where you can connect a three-electrode sensor cable, allowing you to test and use the MyoWare muscle sensor without actually connecting it to your person. Code SP072 Backorder Price €6.49
Speed controller for DC motor (PWM) 6V-28VDC 3A PWM 6V 12V 24V Speed controller for DC motor (PWM) 6V-28VDC 3A PWM 6V 12V 24V features: - Ideal to control the speed of DC motors - Input voltage: 6-28VDC - Max continuous output current: 3A - Max power: 100W - Dimensions: 50x17x28mm - PWM frequency: 21kHz - Adjustable duty cycle: 5% -100% - Keep in mind that the voltage applied to the motor will be the supply voltage applied to the circuit Code A0021 ✗ Out-of-Stock Price €5.89
Red Laser Module 650nm 5mW Head Point Adjustable Focal Length Red Laser Module 650nm 5mW Head Point Adjustable Focal Length features: - Type: red laser diode- Laser type: point- Adjustable Focus- Wavelength: 650nm- Output power: 5mW- Operating voltage: 4.5-5V- Operating intensity: <40mA- Operating temperature: -30ºC to 60ºC- Dimensions of the emitter: Φ12x35mm- Cable length: 130mm Code M0042 Available Regular price €3.49 -€0.50 Price €2.99
Battery LIPO 190mAh 3.7V LITHIUM POLYMER BATTERY Battery LIPO 190mAh 3.7V features: -Battery type-lithium polymer. - Type of battery terminals- 3 cables. -Voltage of the battery-3.7 V -Capacity of the battery- 190 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Battery length / depth- 33 mm -Battery width / diameter- 44 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output. Code PP039 Available Price €3.69
Sensor Cable - Electrode Pads (3 connector) This is your simple three conductor sensor cable with electrode pad wires. These cables measure 24" long and feature a 3.5mm audio jack on one end with snap type receptacles for biomedical sensor pads. Code SP075 Available Price €8.99
Screw Shield V2 for Arduino UNO Screw Shield V2- Arduino ScrewShield UNO features: Screw Shield V2 allows: - Being punctured directly to an Arduino Uno- Facilitate the connection of different modules, such as sensors, relays, servos, buttons, potentiometers and more. Code M0172 Available Regular price €4.95 -€1.00 Price €3.95
MyoWare 2.0 Muscle Sensor Basic Kit Sparkfun sensor MyoWare® 2.0 from Advancer Technologies is a newer version of this producer's bestseller. The MyoWare 2.0 muscle sensor included in this kit has been redesigned from the ground up with a new compact and easy-to-use design, and has been updated with the latest, most advanced chipset to improve sensor performance and reliability. In addition, MyoWare has developed a range of shields that work with the sensor (in our LED shield offering, displaying sensor readings as LED lights). Code SP044 Available Price €121.95
Heart Rate Oximetry Sensor Module for Arduino MAX30100 This detection module that allows you to detect your heart rate and blood oxygen level from your Arduino project. You can monitor your blood oxygen level yourself to avoid going to the doctor or pharmacy on purpose. Simply press the sensor with your finger and wait for the reading of hemoglobin (Spo2), heart rate and Perfusion Index (PI%). It is a solution as an integrated heart rate sensor and pulse oximetry, which includes two LEDs, a photodetector and is optimized for analog low noise optics. Code S0148 Available Regular price €6.95 -€1.00 Price €5.95
mmWave Radar - Human Presence Detection Sensor (9 Meters) Microwave radar presence and motion sensor using FMCW technology, compatible with Arduino and Raspberry Pi. Code DF029 Available Price €35.99
Heartbeat sensor for Arduino This detection module combines a phototransistor and an LED that, when placed on a finger or ear lobe, provides a reading.By reading this signal you can interpret a change in the signal as a heartbeat.Keep in mind that this is a sensitive module and you will experience the noise from home lights and other sources, since minimizing the lighting of the unit will help get the readings. Heartbeat sensor Arduino features: - Connection pins:- S: Analog output- (+): Power supply 3-5 VDC,- (-): GND.- Length: 18mm,- Width: 18mm,- Height: 4mm,- Operating temperature: -40ºC to + 85ºC. Code S0136 Available Regular price €9.49 -€1.50 Price €7.99
Gravity: Analogue heart rate monitor sensor (ECG) for Arduino The DFRobot heart rate monitor sensor (SEN0213) is used to measure the electrical activity of the heart. Code DF015 Last items in stock Price €28.95
Smart bathroom scale with Tuya App (Android, iOS): Stylish smart scale with tempered glass platform with heart rate measurement and 12 body analysis functions. Compatible with the Tuya Smart App (iOS 8.0 or higher, Android 6.0 or higher). Easy-to-read LED display. Code VE017 Last items in stock Price €39.99
MyoWare Muscle Sensor Development Kit - OBSOLETE This is the MyoWare Muscle Sensor Development Kit, an Arduino-powered electromyography (EMG) sensor kit that gives you the MyoWare, each MyoWare Shield and everything you need to connect them all together. Code SP074
Digital finger pulse oximeter ZM-700-0 With this small and simple device, you can control your blood oxygen level yourself to avoid going to the doctor or pharmacy on purpose. Simply insert your finger and wait for the reading of haemoglobin (Spo2), heart rate and Perfusion Index (PI%). The heart rate is also graphically displayed. You can rotate the screen to see it in its 4 positions. High precision device, with low power consumption and automatic shutdown. Code H0243 Available Regular price €19.90 -€1.50 Price €18.40
mmWave 24GHz Sensor - Human Static Presence Lite Human Presence Module mmWave 24GHz Sensor - Human Static Presence Lite Human Presence Module - human presence, FMCW, Configurable Underlying Parameter, Arduino support, Home Assistant, ESPHome Code SS050 Last items in stock Price €11.99
Sensor Cable - Electrode Pads (3 connector) This is your simple three conductor sensor cable with electrode pad wires. These cables measure 24" long and feature a 3.5mm audio jack on one end with snap type receptacles for biomedical sensor pads. Code SP075 Available Price €8.99
MyoWare 2.0 Muscle Sensor Basic Kit Sparkfun sensor MyoWare® 2.0 from Advancer Technologies is a newer version of this producer's bestseller. The MyoWare 2.0 muscle sensor included in this kit has been redesigned from the ground up with a new compact and easy-to-use design, and has been updated with the latest, most advanced chipset to improve sensor performance and reliability. In addition, MyoWare has developed a range of shields that work with the sensor (in our LED shield offering, displaying sensor readings as LED lights). Code SP044 Available Price €121.95
Heart Rate Oximetry Sensor Module for Arduino MAX30100 This detection module that allows you to detect your heart rate and blood oxygen level from your Arduino project. You can monitor your blood oxygen level yourself to avoid going to the doctor or pharmacy on purpose. Simply press the sensor with your finger and wait for the reading of hemoglobin (Spo2), heart rate and Perfusion Index (PI%). It is a solution as an integrated heart rate sensor and pulse oximetry, which includes two LEDs, a photodetector and is optimized for analog low noise optics. Code S0148 Available Regular price €6.95 -€1.00 Price €5.95
mmWave Radar - Human Presence Detection Sensor (9 Meters) Microwave radar presence and motion sensor using FMCW technology, compatible with Arduino and Raspberry Pi. Code DF029 Available Price €35.99
Heartbeat sensor for Arduino This detection module combines a phototransistor and an LED that, when placed on a finger or ear lobe, provides a reading.By reading this signal you can interpret a change in the signal as a heartbeat.Keep in mind that this is a sensitive module and you will experience the noise from home lights and other sources, since minimizing the lighting of the unit will help get the readings. Heartbeat sensor Arduino features: - Connection pins:- S: Analog output- (+): Power supply 3-5 VDC,- (-): GND.- Length: 18mm,- Width: 18mm,- Height: 4mm,- Operating temperature: -40ºC to + 85ºC. Code S0136 Available Regular price €9.49 -€1.50 Price €7.99
Gravity: Analogue heart rate monitor sensor (ECG) for Arduino The DFRobot heart rate monitor sensor (SEN0213) is used to measure the electrical activity of the heart. Code DF015 Last items in stock Price €28.95
Smart bathroom scale with Tuya App (Android, iOS): Stylish smart scale with tempered glass platform with heart rate measurement and 12 body analysis functions. Compatible with the Tuya Smart App (iOS 8.0 or higher, Android 6.0 or higher). Easy-to-read LED display. Code VE017 Last items in stock Price €39.99
MyoWare Muscle Sensor Development Kit - OBSOLETE This is the MyoWare Muscle Sensor Development Kit, an Arduino-powered electromyography (EMG) sensor kit that gives you the MyoWare, each MyoWare Shield and everything you need to connect them all together. Code SP074
Digital finger pulse oximeter ZM-700-0 With this small and simple device, you can control your blood oxygen level yourself to avoid going to the doctor or pharmacy on purpose. Simply insert your finger and wait for the reading of haemoglobin (Spo2), heart rate and Perfusion Index (PI%). The heart rate is also graphically displayed. You can rotate the screen to see it in its 4 positions. High precision device, with low power consumption and automatic shutdown. Code H0243 Available Regular price €19.90 -€1.50 Price €18.40
mmWave 24GHz Sensor - Human Static Presence Lite Human Presence Module mmWave 24GHz Sensor - Human Static Presence Lite Human Presence Module - human presence, FMCW, Configurable Underlying Parameter, Arduino support, Home Assistant, ESPHome Code SS050 Last items in stock Price €11.99
Sensor Cable - Electrode Pads (3 connector) This is your simple three conductor sensor cable with electrode pad wires. These cables measure 24" long and feature a 3.5mm audio jack on one end with snap type receptacles for biomedical sensor pads. Code SP075 Available Price €8.99